ge mi fu used for sale

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

2018 Grieser Vacuum butterfly mixer. Key details about the system: Manufacturer Grieser Year of construction 2018 Operating hours approx. 700-800 hours. 3 associated containers Documentation available Vacuum butterfly mixer Total connected load approx. 18 kW Operating voltage 400 V/ 50Hz Control voltage 24 V DC Machine weight approx. 2400 kg (without container) Max height 2450 mm (stroke 650 mm) Width approx. 1360 mm Long approx. 2641 mm Zones not Ex 3 butterfly stirring inserts Butterfly 72-720 min^-1 Wiper arm n=16 min^-1 Sight glass with light on hood On the hood pressure gauge, analogue and pressure transmitter connection TC-DN25 Vacuum pump 1.5 kW 1500 min^-1 Container clamping with quick release and one-sided monitoring with safety initiator Control panel with control panel in control cabinet Paint finish RAL 1013, pearl white smooth lacquer Container Mixi ...

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

Material : Areas in contact with the product in stainless steel Year of construction : 2014 Volume : 750 ltr. Drive : 45 KW

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

Ploughshare mixer, used Type : PSM 200 / 1 MK Manufacturer : MINOX Maschinenhandels GmbH Volume : 200 ltr. Material : Areas in contact with the product in stainless steel Drive : 2.2 KW 1 x cutter head : 3000 rpm --> incl. control cabinet and base frame

Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel

Exchange units for contour milling HOMAG

Hobart mincer Stainless mincer, 150mm mincing plate diameter, with spare plate and blade, 3Ph

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Key data: 630 mm, 500 mm, 460 mm

Speed range: 31.5 - 3150 rpm Control Heidenhain TNC 155 Feed speed: 1 - 3000 mm/min. in rapid traverse X -Y: 6000 mm/min. in rapid traverse Z: 4000 mm/min.

Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base

50,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0150EUBA Condition: Used Volume 50000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Diameter 3300 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Manufacturer: Holvrieka Built in 1972 Topsoil: Inclined cone base 2 crane eyes Level measurement sensor Ventilators Tank cylinder: Manhole 500 x 400 mm Agitator mixer - side with propeller Subsoil: Flat bottom with 2% slope Outlet bag DN 100 Sensor for level measurement

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Mikron WF 32 CH universal milling machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travel: X 560 mm Y 500 mm Z 400 mm Clamping area: 530 x 900 mm Rapid traverses : X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg More items - new and used - can be found in our shop! International shipping costs on request!

Welding machine, fully functional

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

Ribbon Mixer 700ltr Twin shaft End discharge

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

x-travel: 450 mm y-travel: 400 mm z-travel: 400 mm : control: Heidenhain 355 cooling: total power requirement: 4 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 380 mm total power requirement: 2,6 kW weight of the machine ca.: 1,5t t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain turning speeds: 3150 U/min table surface area: 700x350 mm Table load: 400 kg spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...

Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...

Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...

Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...

Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...

Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...

Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...

Vertical packaging machine as a high-speed version with piston pump for dosing liquids. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from ...

Vertical packaging machine as high-speed version with auger dosing unit for powder. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...

Vertical packaging machine as high-speed version with volumetric dosing unit for granulates. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 120 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately ...

Vertikale Verpackungsmaschine mit Schneckendosiereinheit f?r Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L600xW720xH1590mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...

Vertikale Verpackungsmaschine mit Kolbenpumpe f?r das Dosieren von Fl?ssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1720mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differe ...

Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1600mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediatel ...

Used stainless steel cube mixer, made by Paasch, type: F 31. Total capacity 3500 liters.

MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...

Combined copying milling machine - lathe MICHÄL KÄMPF

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (suita ...

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request