ge healthcare used for sale

geared motor, electric motor -Speed: 167 rpm -Power: 0.25 kW -Design: B5 -Hollow shaft diameter: Ø 20 mm -Protection class: IP 65 -Weight: 11 kg

geared motor, electric motor -Speed: 167 rpm -Power: 0.25 kW -Design: B5 -Hollow shaft diameter: Ø 20 mm -Protection class: IP 65 -Weight: 11 kg

geared motor, electric motor -Speed: 88 rpm -Power: 0.015 kW -Design: B5 -Shaft diameter: Ø 14 mm -Protection class: IP 65 -Weight: 6 kg

PG-D 80 TEA-S HC Generator for home feed-in 230V / 400V Time-limited output power 8.0 / 8.9 kVA Time-limited output power 6.4 / 7.5 kW Runtime at 50% load: 7.5h Protection class socket IP 44 Protection class generator IP 23 Fuel diesel, 15l tank Starter E-Start Dimensions: 950x550x690 mm Weight approx. 151kg G&STÜ-6731080

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives

For sale is a Marelli MJB 450 LB B24 generator with the serial number MX 28990. This model was originally paired with a Jenbacher 2020V12 engine. The generator has an output of 1,237 kVA at an output voltage of 400 V. The year of construction is 2010, the operating hours so far are 40,000. The price of this generator is 10,000 euros. For more information or to arrange a viewing, please contact us.

geared motor, electric motor -Speed: 104 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Number: 5x geared motors available Price: per piece -Dimensions: 330/180/H140 mm -Weight: 7 kg

geared motor, electric motor -Speed: 37 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 65 -Number: 3x motors available Price: per piece -Weight: 8 kg

geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 18 kg/piece

For sale is an AvK DIG 130 k/4 generator with the serial number 83 31639 A101. This model was originally paired with a Jenbacher 612 engine with design number R049. The generator has an output of 3,000 kVA at an output voltage of 6,300 V. The year of construction is 2013, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 18 kg/piece

geared motor, electric motor -Speed: 92 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54 -Weight: 7 kg

geared motor, electric motor -Speed: 50 rpm -Power: 0.12 kW -Design: B5 hollow shaft -Shaft diameter: Ø 14 mm -Protection class: IP 54 -Weight: 6 kg

For sale is a Newage LVSI 804 S2 generator with the serial number 0856114/01. This model was originally paired with a Jenbacher 612 engine with the design number G168. The generator has an output of 2,560 kVA at an output voltage of 400 V. The year of construction is 2009, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 14,000 euros. For more information or to arrange a viewing, please contact us.

geared motor, electric motor -Speed: 30 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

geared motor, electric motor -Speed: 25 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 14 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

NEW UNUSED G3412 year 1995 -470HP- NATURAL GAS only engine

Key data: 3500 mm, 20

HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Gear motor, electric motor -Condition: unused -Speed: 90 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 25 kg

geared motor, electric motor -Speed: 17.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 16 kg

geared motor, electric motor -Speed: 6.8 rpm -Power: 0.18 kW -Design: B14 angle -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Weight: 17 kg

geared motor, electric motor -Speed: 4 rpm -Power: 0.12 kW -Design: B14 angle -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Weight: 30 kg

Gear motor, electric motor -Speed: 260 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Dimensions: 420/150/H220 mm -Weight: 18 kg

geared motor, electric motor -Speed: 62 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 18 kg

geared motor, electric motor -Speed: 103 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 18 kg

From a current recycling we offer you various bakery furnishings including baking proofer, bread slicer, freezer, stainless steel sink. Year of manufacture: various (including 2014/2015) First registration: / Condition: used. Functionality cannot be guaranteed Hours: / Asking price: 5.000,00 Euro VHB Factory Price: Equipment / accessories / other information: Back proofer, 15 chairs, bread slicer, stainless steel sink, freezer, filter proofer, POS system screen, cream climate cabinet Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 63607 Wächtersbach The sale is without warranty Subject to prior sale

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

geared motor, electric motor -Condition: unused -Speed: 189 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 24 kg

geared motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Design: B14 hollow shaft -Shaft diameter: Ø 25 mm -Brake -Protection class: IP 54 -Weight: 30 kg

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

Key data: 800 KW, 938 kVA, 450 V

Make: Yanmar Model: 6N21L-EV Mfg. Date: 2006-09 Cont Rating: 800 KW Speed: 720 RPM Generator: Taiyo Mfg. Date: 2007-09 Model: GE45C-10 Output: 937.5 kVA Frequency: 60 Hz Volts: 450 V Qty: 3 #Yanmar #engine #generator #vessel #ship #marine #power #energy

Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 20 kg

geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg

geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg

geared motor, electric motor -Speed: 100 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 20 mm -Brake -Protection class: IP 55 -Weight: 20 kg

Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...

Geared motor, electric motor, three-phase motor -Speed: 63 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Geared motor, electric motor, three-phase motor -Speed: 47 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 44 Price: per piece -Quantity: 2 available -Weight: 23 kg

geared motor, electric motor -Speed: 18 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 30 mm -Brake -Protection class: IP 54 -Dimensions: 560/230/H210 mm -Weight: 33 kg

geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg

geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg

geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg