ge 669 used for sale

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: DEMAG, gearbox type CM63 / GS -Speed: 21 rpm -Shaft: Ø 28 x 30 mm -Motor: Kobold type KGC 608.28 0.5 kW -Voltage: 220V -Protection class: IP20 -Dimensions: 490/160 / H200 mm -Weight: 25 kg

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: SEW, Angle gearbox type SSG3W i 75.36 -Speed: 19 rpm with a 1.1 kW / 1400 rpm motor -Drive shaft: Ø 19 x 40 mm -Output shaft: Ø 35 x 70 mm -Dimensions: 360/240/H230 mm -Weight: 31 kg

Gear motor, electric motor, three-phase motor -Speed: 22 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP54 -Construction: B5 angle -Dimensions: 325/240/H155 mm -Weight: 9.8 kg

Gear motor, electric motor -Spare parts come: from grinding machine WERKO SKSt 200 -Motor: VEM type KR 63,1/2 THAII -Motor: 220/380 V/0.18 kW -Protection class: IP 44 -Shaft: Ø 20 mm -Dimensions: 410/330/H220 mm -Weight: 35 kg

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

Gear, gears, spur gear -Gear: 35 teeth -Shaft mount: inside Ø 60 mm -Measurements: see drawing in the photos -Dimensions: Ø 368 x 78 mm -Weight: 16 kg

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Gear, stin gear, angular gear -Gear wheel and V-belt drive: SEW R42W -V-belt drive: O 255 mm -Translation: 1: 11.96 -with: counter bearing -Dimensions: 680/255/H255 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 378 rpm -Power: 0.75 kW -Hollow shaft: Ø 19 x 79 mm -Construction: B14 angle -Protection class: IP55 -Dimensions: 330/130/H200 mm -Weight: 9 kg

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.

Key data: 3431 , 4767 , 10500

Jenbacher gas generator ( UNUSED ) , Model : J620GS-F75 Power Output : 3431 KWm / 4767 KVA Voltage : 10500V Frequency : 50 Hz Qty : 8 sets Used gas generator, about 4000 hrs

Key data: 750 KW, 938 kVA, 400 V

MWM Emergency Power Generator TBD602-V16 Diesel emergency generator from 1980, operating hours are unknown, complete with controls, muffler, radiator, expansion tank and day tank. 1 available from 04/24 624 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: AVK DIDB 120/1109/40, 780 KVA Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Generator Set Serial number: 80 79 53 Power [KW]: 750 Year of construction: 1980 Hours: unknown AC Generator AVK DIDB 120/1109/40 Manufacturer: AVK Model No.: DIDB 120/1109/40 Type: AC Synchronous Generator Serial Number: 807953 Power [KVA]: 780 Voltage [V]: 10,000 / 5,770 Frequency [Hz]: 50 Electricity [A]: 51 Speed [1/min]: 1,500 Year of construction: 1980

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg

Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Key data: 2420 KW, 400 V

MTU 20V4000 and 16V4000 UPS systems with 250 operating hours in mint condition immediately available

Gears, angular gears, stin gear, angular gear, transmission gear -Translation: i = 1: 1 -Drive shafts: dimensions see pictures -Dimension: Ø 225 x 180 mm -Weight: 9.6 kg

Key data: 220

MAN Lean Burn Biogas 2876 LE302 Containerised Generator. Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2016 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

AvK Synchronous Generator DIG 120 h/4 1370 KVA 10500 V 75 A 50 Hz, 1500 rpm. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator NEW Condition (NEW)

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

Gear motor, electric motor, electric gear motor -Motor: Siemens 2KG33310RE304BA1 -Speed: 35 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 x 40 mm -Protection class: IP55 -with: fan -Price: per piece -Number: 3x available -Dimensions: 605/156/H210 mm -Weight: 27 kg/piece

Empty 40ft container for genset Ideal for Caterpillar 3516 or similar Available immediately. Very High specs container - for further details and information contact us at: Enquiries@ukpowergeneratorsltd.com

Key data: 18 KW, 13 1/min

Infinitely adjustable variator motor with belt variator

Wartsila 6L20 Genset YOM: 2007 1200 Kw at 1000 RPM 50 Hz 15.000 Working hours & in good condition Available from our Stock in Turkey

We have a empty container ideal for jenbacher 208 and jenbacherb316 for sale. This container can be easily moved to the desired location. For pricing and further information, please feel free to contact. Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

2 x Generating sets BRAND: YANMAR MODEL: 6NHL-ETP POWER:740 HP 1500 RPM ENGINE SN 4803FJF GENERATOR: 500 kVA (50 Hz.) CONDITION: ONLY TEST HOURS

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46.9 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 475/210/H195 mm -Weight: 29 kg

Key data: 210 , 400

Tedom Cento 210 kW Biogas Container Generator Set Brand: TEDOM Package: CENTO 200 Engine model: TB 210 G5V TW 86 Fuel: Biogas Capacity: 210 kW Voltage: 400 Year: 2022 Hours: 1,000 Scope of supply: Full container with engine, alternator, frame, control panel, gas line, radiators, chimney etc. Additional info: In 2023 a new engine block was installed and the alternator was overhauled. (90k€ invoice). Original container and plant is from 2017. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Gear motor, electric motor, electric gear motor -Motor: VEM type KR 63,1/2 S -Power: 0.18 kW -Voltage: 220/380 volts -Construction: B5 angle -Shaft: Ø 22 mm with driver slot -Protection class: IP44 -Dimensions: 300/170/H180 mm -Weight: 8.4 kg

Key data: 210 , 400

Tedom TB210 G5V TW 86 Complete Containerised Biogas Unit. Make and model: Tedom TB210 G5V TW 86 Capacity: 210kW Hours: 51 Year: 2015 Fuel: Biogas V: 400 Hz: 50 Scope of supply: Complete Containerised Biogas Unit Including: Engine, Alternator (Leroy Somer), Control Panel (ComAp IntelVision8), Base Frame, Gas line, 2 x Radiators, 2 x Air Intake, Silencer, Piping, Biogas Treatment and Condensare discharge system, Carbon filter. All documentation and diagrams. Inspection notes: Liners in good condition. Engine turned over easily. Has been kept heated. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Listing ID: 22624 Brand: ZF 350 Model: 350 Power: 324 kW(435hp) 1800 rpm (CD) Ratio: 2,077:1 SN 20030818 Features: SAE Housing, Controls Mechanical ,Hydraulics ,Oil Filter HS Code: 84836080

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

Gear motor, electric motor -Speed: 141/1440 rpm -Hollow shaft: Ø 32 mm -Power: 3kW -Dimensions: 500/195/H240mm -Weight: 47kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

MITSUBISHI S6R2 - A2PTAW2 772 kW / 1500 RPM Features: Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Panel Radiator

Gearbox, spur gear, angle gearbox -Translation i: 53:1 -Drive shaft: Ø 30 x 55/Ø 18 x 30 -Price: per piece -Quantity: 2 pieces -Dimensions: 240/195/H190 mm -Weight: 16.55 kg