ge 669 used for sale

Gema lifting device for holding 2 powder guns ( 3 also works ) Lifting height 2000 mm Total height with mobile motor and gearbox unit approx. 2500 mm Lifting device was maintained to the last by Gema Lifting device With motor, gear unit and rotary encoder org. Gema Connection via 16 pin HTS plug

Type: two-door pass-through type Sterilization method: superheated water Camera size: 900х1450х2500mm Chamber volume: 3.25m3 3 carts can be placed in the camera. Each cart can accommodate 5 trays. The set includes more than 20 carts and more than 200 trays.

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Operating voltage: 24 V Qmax: 100 l / min Qmin: 10 l / min minimum measured quantity: 5 l Pulse value: 100 IMP/l

One used 7730 KVA GEC Alsthom 11KV AC generator( generator end ) for sale. The alternator is in a very good running condition. He was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: GEC Alsthom typ: CG710G2000U voltage: 11.000V powerrating: 7730 KVA rpm: 1500 r/min manufactured: 1991 weight: 19,5 T price on request

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: pedestrian stacker -Wheel: 220 x 70 mm -Dimensions: 220/250/H640 mm -Weight: 54 kg

Caterpillar Very low Running Hours1354 , Year 2012 Radiator Cooled set is available for sale. Generator Details: MAKE:CATERPILLAR TYPE:3512B KW:1424 KVA:1700 RPM:1800 YEAR:2012 RUNNING HOURS:1354hrs Injector: 3861769 ECM SOFTWARE 3440317 TURBO 299401 Above Good Running Caterpillar Generator has been Removed from Oil Rig... Condition is Excellent... Engine with Alternator on Common base Frame..

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

Offer via gebr. overhauled tube cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw was completely overhauled and tested. - Gearboxes restocked and new seals Specifications: Pipe outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

No. 4700: 1 gebr. Flat gear motor / gear motor n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Fabr., NORD / Getriebebau NORD, Type SK 6282 AZ - 180 M / 4 TF H2 Weight approx. 350 kg Drive power: 18.5 kW

Steam generator, steam boiler, boiler stove used Manufacturer Gebr. Weißbach GmbH Year of construction 1993 Ab. Steam generation 1700 kg / h Ab. Pressure 6 bar Water capacity 3795 l zul Vorlauftemp. 165°C zul heat output 1.1 MW Dimensions: 4000 x 1900 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gebhardt goods lifts ConVer 146.2, 4 pieces with 4 stops, through-loading door front and rear, drive above, colour 7043 grey Conveying height 9000 mm / Car width 1800 mm / Car depth 1460 mm / Car height 2000 mm / Starting ramp 100 mm / also pit possible 120 mm Heights adjustable Machines are new and available from stock, delivery time with adjustment approx. 4-5 weeks, without changes immediately Price per piece

1. UHT: - GEA Finnah - YOM: 1991 - Capacity: 1200 l/h 2. Steep tank: - Rieger Behälter GmbH - YOM: 2008 - Cooling mantle - Volume: 6,250 l - Max. Pressure: 3.5/-1.0 bar 3. Homogenizer - GEA Nirosoavi NS3037 H - YOM: 2001 - Capacity: 2,000 l/h - 2 stages, max. 250 bar

Product number: 2807J Type: DUAL-PACK 12 Serial number: 152656 P12 Year of construction: 2015 Capacity: 500 kg/24h Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R100L63L/4 -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -height of the shaft axis: 110 mm -Drive shaft: Ø 12 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 455/300/H210 mm -Weight: 20 kg

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer Motor Nord Type: SK63L/4 -Manufacturer of variable speed gear North type: SK01-R080U-63-L/4 -Motor power: 0.18 kW -Speed range: 55-275 rpm -Motor: adjustable -height shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 1 piece available -Dimensions: 350/175/H305 mm -Weight: 13.9 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 4 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg

Direct current, gear motor -Power: 3 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 2282AZ-IEC 80 -Translation: 1: 11.81 -Hollow shaft diameter: 35 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear type: SK01-R1000-/1/L/4 -Motor power: 0.37 kW -Speed range: 33-165 rpm -Motor: adjustable -height of the shaft axis: 100 mm -Construction: B3 -Drive shaft: Ø 20 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 505/320/H195 mm -Weight: 23 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK20-R100U-80S -Motor power: 0.55 kW -Speed range: 21-105 rpm -Motor: adjustable -height of the shaft axis: 125 mm -Drive shaft: Ø 25 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/320/H240 mm -Weight: 30 kg

TO WHOM IT MAY CONCERN ;

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Merlin Gerin Circuit Breaker compact C1001 N circuit breakers from 1996, 1 available. Ui 750 V / Uimp 8 kV Price: 2.500 €, Manufacturer: Merlin Gerin Model: C1001 N compact Type: Circuit Breaker / Motor Circuit Breaker Rated voltage [V]: 750 Rated surge voltage [kV]: 8 Year of construction: 1996 Dimensions [LxWxH]: – Weight [kg]: 177

Description: Unused 50hz 230/400V DC 12 output quiet frame 65 db electric start incl. battery self-excitation & constant voltage ( AVR 3 phase Approx. Onsite Dimension. (l x w x h): 960 x 560 x 760 mm, weight approx.: 50 kg

Steam generator, dimensions: 1800 mm x 1500 mm x 1800 mm.

Unipak horizontal AC generator with two bearings, mounted on baseplate, for steam turbine Manufacturer – Alstom Electric Machines Limited Output – 4800 kVA Voltage and Frequency – 6300 V 50Hz Rated Power Factor – 0.8 lagging Number of Poles – 4 Insulation Class – F Total mass of generator – 18000 Kg Standard to wich the generator is designed and built – IEC34 Enclosure code – IP54 Sound Pressure Level – 85 dB (A) Coolant – Clean fresh water

Description: generator gasoline Voltage 380/220 volts Frequency 50Hz Power 5.5 / 5.0KW weight 100 kg see pictures Approx. Onsite Dimension. (l x w x h): 700 x 600 x 600 mm, weight approx.: 100 kg

Capacity: up to approx. 4.500 bph Working direction: left-right Format Parts:                 0.375 Bord 0.375 Schleg                 0.5 Bord                 0.75 Bord  0.75 Schleg                 1.0  Bord   1.0 Schleg                 1.5l Bord   1.5 Schleg More then 300 machines new and second hand on our seema .de

Swing over bed: 590mm. Swing over carriage: 340mm. Swing over gap: 820mm. Distance between centers: 1500mm. Spindle: 58mm. Equipped with chuck and steady rest. Equipped with DRO.

Bottle washing machine Gera Type: Arcade DS02/110/12 Year of construction: 1993 with 12 bottles in the row Bottle cell: up to 1,0ltr. Capacity: 9.500 bph with Siemens S5 control complete stainless steel machine with pre-soaking, automatic lable removal system and double cautic bath

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

Cutting mills Drive with 4 New Knives Drive General Overhauled as a replacement for Getecha cutting mills . Pradler Machines Service Service for temperature control / cutting mills / drying

New washer/dryer Manafacture: Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be laundered, glassware and parts of bottling plants Size of the chamber 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geminis GE650 lathe. Distance between centers: 1500mm. Swing: 680mm. Swing in carriage: 410mm. Swing in gap: 850mm. Spindle: 82mm. 18 speeds (18-1250rpm) Equipped with chuck and steady rest. Weight: 3980Kgs.

Center lathe Geminis GE1000 Distance between centers: 3000 mm Turning diameter: -Over bed: 1000 mm -Over cross slide: 720 mm -In gap: 1240 mm Spindle bore: 104 mm Spindle speed: 13 - 1000 rpm Motor: 18,5 kW Year of manufacturing: 1997

Load: 300-1500kg, weight: 1.43t, an inspection is possible.

Geneglace F900 Ice generator with dosing unit This unit designed as an optimal solution for cooling products on the production line. The main feature is smooth integration at fish factories with a conveyor processing system. The high capacity generator produces ice and the dosing machine supplies ice flake straight to the fish boxes. Refrigerant: NH3 (Ammonia) Capacity: 52 tons per 24 hours (26 tons on each of 2 drums) Refrigeration power: 130 kW Voltage: 3 x 400 V \ 50 Hz

WEBER Slicer Model CCS 602 GEA POWERPAC 688 – film width 490 mm Plant suitable for the automatic production of meat and sausage products packed in trays.

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

- Grinding length: 600 mm - Grinding width: 400 mm - Workpiece height: 400 mm - Magnetic table: 600 x 350 mm - Dressing device: yes - Grinding wheel Ø: 300 mm - Grinding spindle speed: 1400 rpm - Total power: 6 kW - Machine weight: 3500 kg - Space requirements (W x D x H): 2.0 x 1.5 x 2.2 m Details Automatic delivery in Z, fully functional Accessories Documentation, Machine Feet

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36