gc ms used for sale

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

KWe: 165

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module -Manufacturer: Bosch, servo module -Type: SM 4.7/20-GC16 T161-902 -Un: 325V DC -Dimensions 250/60/H260 mm -Weight: 2.3 kg

SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

Agilent GC 6890N, Detector WLD Option: Extension with FID Injector: Split/Splitless with EPC LAN connection Agilent Chemstation B04.03

Manufacturer: Cabero Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 2000kW Air temperature: 30º C. (inlet) Fans: 10 pieces, 1.5kW, 400V, 50Hz, 3 wires, EC fans Speed control Terminal: Inlet 2xDN100, Outlet 2xDN100 Dimensions: LxWxH = 10,000x2400x1500mm Weight: 2500kg Sound pressure level: 63 dB(A) 10m distance, Year of Make: 2013 Condition: Good, leakage and fans tested. 3 months warranty

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -

Cooler Eco Type: GCE354A8ED Cooling capacity: 16.13 kW at DT8 Fin spinning: 8 mm Fans: 4 x 350 mm Dimensions: 2525 x 610 x 545 mm Refrigerant: Freon Electric defrost Volume: 10.5 L Weight: 81.5 kg Quantity in stock: 1 Stock number: CH 502 Condition: New, unused Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

honing diameter: 9999999 mm stroke: 9999999 mm throat: 9999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used without warranty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MTU Model: GC370B5 Year of Manufacture: 2015 Operating Hours: O Weight (with/without fluids): 5000 kg / 4700 kg Performance Class: G1 Electrical Specifications: - Electrical Power (COP): 370 kW - Nominal Voltage: 400 V - Nominal Frequency: 50 Hz - Rated Power Factor (cos φ): 0.8 / 0.95 - Max. Outdoor Temperature: 25°C - Max. Installation Height: 100 m a.s.l. Heat Extraction (DIN 6280): - Thermal Output: 401 kW - Admissible Water Temperature (min/max): 70°C / 90°C - Admissible Overpressure in Heating Circuit: 16 bar Table cooler, chimney, everything included. Find more here - / Contact us at -

  - Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm

General SKU399X1185 LocationBarneveld MakeGünter Pressure Working pressure41 Bar Main Features Heating (medium)Gas Temp.100 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Gas heatingcheck Heating medium:Gaseous Heating capacity—50 / 100 °C Electric capacity230 V Information TypeGCHC RD 045.2/12-48-4239256M Mach.No.404578695/29 00147 Year of construction2017 Mounted on frameOn legs With switchcheck Floorspace2,05 x 0,90 m Total height1,10 m Weight500 kgTemperature control unitsGünterHeat exchangers > Temperature control unitsBrand > Günter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

MSC, MULTIVAC, Terminal-T, Tochscreen

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

Compressor

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

Mounting plate with MS03-Symlock mount and retaining lug, - Recording: MS03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS01-Symlock mount and retaining lug, - Recording: MS01, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS01-Symlock mount and retaining lug, - Recording: MS01, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS03 mount, - Suitable for Hammer HM300, - Recording: MS03, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: MS01, - Hole pattern: 13.5 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

2025 BIG backhoe bucket 60cm with MS03 Symblock attachment, Technical specifications:, - Weight: 158 kg, - Recording width: 60 cm, - Contents: 203 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 30cm with MS03 Symblock attachment, Technical specifications:, - Weight: 104 kg, - Recording width: 30 cm, - Contents: 90 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 70cm with MS03 Symblock attachment, Technical specifications:, - Weight: 103 kg, - Recording width: 70 cm, - Contents: 149 liters, - CAT 3 - suitable for 2.8 - 3.9t excavators

2025 BIG backhoe bucket 70cm with MS08 Symblock attachment, Technical specifications:, - Weight: 210 kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9t excavators

2025 BIG backhoe bucket 50cm with MS03 Symblock attachment, Technical specifications:, - Weight: 93 kg, - Recording width: 50 cm, - Contents: 103 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

2025 BIG backhoe bucket 60cm with MS01 Symblock attachment, Technical specifications:, - Weight: 80 kg, - Recording width: 60 cm, - Contents: 95 liters, - CAT 2 - suitable for 1.9 - 2.7 t excavators

2025 BIG backhoe bucket 90cm with MS08 Symblock attachment, Technical specifications:, - Weight: 285kg, - Recording width: 90 cm, - Contents: 388 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

2025 BIG backhoe bucket 80cm with MS03 Symblock attachment, Technical specifications:, - Weight: 191 kg, - Recording width: 80 cm, - Contents: 278 liters, - CAT 4 - suitable for 4.0 - 5.5 t excavators

NEW, 30 cm wide, with Lehnhoff MS01 Symlock mount, 39 kg net weight, suitable for 1.9 - 2.7 t excavators

NEW, 40 cm wide, with MS01 Symlock mount, 47 kg net weight, suitable for 1.9 - 2.7 t excavators

R23536/12 ELSNER Roller cutter "Semi Auto Rewinder" Model: MSR - 42 Built: 2004 Working width: 100 cm for secare rolls , gift wrapping paper Rolling diameter: 1000 mm Roll-up diameter: 305 mm Material: from light-weight tissue to heavy kraft paper, e.g. flower foil PP etc., newsprint, nonwoven... pneumatic crushing knives on cutting shaft Shaft for 70 he sleeve Automatic shut-off Available: immediately

KARL MAYER RS-3-MSUS-V RS MSUS-V High-performance warp-knitting machine with course-oriented weft insertion for the production of heavyweight fabrics and composite fabrics GEO-TEXTILE FABRIC 540CM 6 gauge Year 2007 Serial number 96700 Running condition (Currently producing fabric for bullet proof jackets) Product features • Production of grid structures or closed fabrics • Combination with substrate fabric according to the product application • Strong knitting elements and yarn feeding guides for the processing of thick, high-performance yarn materials • Special feeding elements for the production of fabrics with fiberglass, carbon and other high-performance fibers possible Karl Mayer Warping beamer DS 21/30 Year 1997 Running condition and video is available

Type: MST. Strapping machine with 6 new replacement strap coils, 0,9 kW.

Size 56/32 V = 84,1 cm m³/U No.: 812654/2 Transmission: Arter Variator (speed control) Type: MSR 61 RF No.: 61 66 94 N1 = 1400 min-1 N2 = 108-865 min-2, approx. 480-4000 l / h Dimensions: LWH = 1000x300x300mm Weight: approx. 80 kg Number of items: 2 2. Pump: No gears, no motor

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Panasonic AC Servo Motor Driver MSDA043A1A

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Synchronous motor, MSK101D-0200-NN-S2-AG0-RNNN, R911316678, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 40kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg