gas vacuum used for sale

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Brand: Lisec Type: Press with Gas filling station Model: FPS-356/25u + RTVN-11/25 Serial Number: 343-002862 Construction year: 2000 Weight: 5,7 tons Power: 13 kVA Air pressure: 6 bar Machine Size L x B x H 5050 (4100+950) x 2400 x 3500 Gas filling unit 700 x 700 x 1500 Working height: ± 53 cm Transport size L x W x H: Lowloader trailer Min.glass size: 250 x 180 x 12 Max glass size: 3500 x 2500 x 52 Condition machine: Very good Control type: B&R Electric. Connection: 400v + N Missing parts: None Documentation: Yes Instructions: Yes Electric diagram: Yes Parts list: On request by Lisec Available software: Back up present Photos/film available: Photo's and video available Remaining: Metered glass filling list Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (2 ...

Key data: 85

Make and Model: MAN E2866E - REBUILT This MAN E2866E engine has been fully rebuilt with genuine MAN heads. Year: 1997 Hours: 50,000 kW: 85 Fuel: Natural Gas Hz: 50 V: 415 Scope of supply: Engine, Alternator, Control panel (Comap), Exhaust Gas Heat Exchanger, Water pump, Canopy with new foam sound attenuationand internal mesh. Service details: Exhaust Gas Heat exchanger cleaned and new insulation fitted. New Plate heat exchanger fitted. New Canopy Fan installed. Engine water pump overhauled and new seal fitted. Control system fitted with Comap control all passwords available. Unit fully cleaned & sprayed. Canopy fitted with new foam sound attenuation and internal mesh. New GAC governor & Actuator fitted. Electronic Ignition fitted. New canopy light fitted. Skid rewired with new temperature & pressure probes fitted. New condensate drain and trap fitted. New  ...

ECKERT Szafir II thick plate burner for sale sectional work table with extraction 3000 x 4500 cutting range 6-180 mm

The machine is available for immediate delivery. The suction table is not included.

plasma cutting 3000x1500 mm - steel thickness max 2 mm with 1 new Thermal Dynamics generator of 6 months

Gas cutter with low mileage It was dismantled by Eckert

Agilent Intuvo 9000 Gas Chromatography (GC) System is designed for fast gas chromatography and high throughput while simplifying your laboratory workflow.

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

For sale is a used/refurbished gas engine Liebherr G9512. Built: 2013 Operating hours: • since the overhaul 4,000h total 12,000h

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

The main components in this installation is the natural gas engine: - Jenbacher engine 620 - Year 2021 - Running hours: 2,981 hours. - Fuel: Natural gas The full list of the equipment included in the scope is the next: MAIN PARTS – ENGINE Jenbacher 620 F 3,358 kWe YEAR 2021 – 2,981 running hours – GENERATOR AVK 6,3KV 50HZ – WASTE HEAT STEAM BOILER: ERENSAN WHB-ESB 160 1600 KG/H – ABSORTION CHILLER: BROAD AIR CONDITIONING 1028 KW 7-12 ºC 177 m3/h – MAIN TRAFO: ABB 4,2MVA 6,3/33kV AUXILIARIES – HT and LT Exchangers – Chiller Unit and its Pumps/Motors – Cooling Tower – HT Radiator – LT Radiator – Chimney – Economizer – Dirty Oil Tank – Clean Oil Tank – Star Point Resistance – Fresh Air Fans – Monorail Crane – All pumps, fittings, pipes, etc. auxiliary equipment in the Engine / Boiler / Chiller system – Generator P ...

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

Caterpillar G3412 - Overhauled - 419 kW - 6ZM

Caterpillar G3516C - Unused - 1555 kW - G7E

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

Key data: 2700 , 11000

Jenbacher 620 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 14,000 Capacity: 2.7 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. This generator has an issue with the coupling. Dismantling is the responsibility of the buyer.

Complete 10MW Jenbacher 6 Series natural gas power plant. These engines have been maintained by the official Jenbacher distributor. Capacity: 10MW Fuel: Natural Gas Year: 2001 Hours: 12,000 - 14,000 V: 11,000 HZ: 50 Scope of supply: 3 x Jenbacher J620GSE01 11Kv 12,100 - 14,100hrs 1 x Jenbacher J616GSE01 11Kv 14,000 4 x external cooling tables 4 x upgraded Comap control panels 4 x engine cell ventilation including louvres and filters 4 x 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board (one per gen plus main) 11/33 15MVA export transformer 11/414 import transformer Waste and fresh oil tanks Plus all other controls and cabling.

Complete 48 MW Westinghouse W251-B11 Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV,

WAUKESHA P9390GL 1 MW 400V / 50 Hz / 1000 rpm, only 6000 hrs, year 1996, dismantled from Landfill station

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

2 nos. unused MWM gas generator TCG2032V16 4.3MW 11KV / 50 Hz, year 2019

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Caterpillar G3516 - Used - 1000 kW - 4EK

Key data: 999 , 400

4 x MTU 8V4000 GS MIP + MMC for sale. Series 4000 four-stroke turbocharged gas engine with mixture cooling - compact, high performance, reliable, maintenance-friendly and extremely economical. Lean mixture technology, state-of-the-art electronic ignition system with individual ignition timing and automatic ignition power control, anti-knock control as well as highly responsive mixture and load control ensure economical and safe genset operation with optimum use of the energy input. Island operation capability. Make and Model: MTU 8V4000 GS MIP Capacity: 999kW Hours: 0 Year: 2023 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator (Stamford), Base frame, MIP (MTU Interface Panel), MMC (MTU Module Control - The MMC contains the cogeneration control system including mains monitoring, visualization and user interface). Price: €285,000 each Plea ...

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Dungs gas valve, used, 24 V, DN 50

For sale a CNG natural gas bundle Sulzer 3 bank 1000 litre 200 bar. Operating pressure: 200 bar Built: 1995 Content: 12 X 77 litre bottles ( 924 litre ) 3 bank steel-building Dimensions: 200 x 50 x 220 cm Weight: 1500 kg

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Gas generator generator generator used AC Generator Manufacturer Newage Engineers LTD Type Stamford HC434F Power 375 kVA / 1500 rpm 220/380 V Gas engine Manufacturer MWM Deutz Type TBG 234 V12 Built in 1988 Power 300 kW / 1500 rpm with heat exchanger BLOKLAND NON FERRO BV Type 275-2000 Area 20 m2 Dimensions total approx. 4100x1250x2400 mm + control cabinet approx. 1500 x 700 x 2100 mm

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, ...

Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Engine Make MTU Engine Type 20V4000 Power KW 2000 KW Power Output 1950 KW RPM 1500 Fuel Natural gas Volts 6600 Hz 50 Year of Manufacturing 2010 Running Hours 44.451 GAS POWER HOLLAND

Engine Make Jenbacher Engine Type JGS 620 GS Power KW/RPM 3044/1500 Fuel Natural gas Generator Voltage 10500 V Hz 50 Year of Manufacturing 2011 Running Hours 42666 30k service done at 32.000 hours GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Intelligent Gas Flow Meter, 5861S/BD1GA0CA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 100 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

For sale is an AvK DIG 140 i/4 generator, which bears the serial number 84 27519 A101. This model was originally paired with a Jenbacher 620 engine with the design number B227. The generator is characterized by its high power of 3400 kVA, which is generated at an output voltage of 10,000 V and a frequency of 50 Hz. This model was manufactured in 2005 and has clocked up 75,000 hours since then. An important aspect to keep in mind is that this generator has been completely overhauled, including Unitrol. This ensures that it is still in optimal condition despite its intensive use. The price of this generator is 29,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

For sale is a Stamford HVSI 804 R2 generator with serial number 0856607/01. This generator was coupled to a Jenbacher 420 engine with the design number H719. The generator delivers an output of 2167 kVA at an output voltage of 10,500 V. It was manufactured in 2010 and has since clocked up 85,200 hours of operation. An important aspect to keep in mind is the careful maintenance history of this generator. At 60,000 operating hours, maintenance was carried out by Baumüller and at 70,000 operating hours, a comprehensive overhaul was carried out. The price of this powerful and well-maintained generator is 18,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.