gas turbines used for sale

Gas Flare Brand: C-Deg Model: LTC 1,7 VE Year: 2020 Fuel: Biogas Additional info : DN 80 normal volume: 300m2/h max combustion power: 1,7MW Gas composition: CH4 : 55 Vol.-% (min 40 to max 60), CO2: 45 Vol.-% (min 55 to max 40), H2S max 1000pm.

Witt-Gasetechnik gas mix station, type: KW 100 2M, number: 15755, year of construction: 1990, gas type: CO2, dimensions: 360 mm x 310 mm x 260 mm.

We have 2 fillers for sale! One machine for 95 mm cups, dual filling/sealing/lid stations for increased capacity. One machine intended for spares (100 ml plastic cups for juice/water). Lots of spare parts. Price is as is, where is. Could also be sold refurbished, please inquire. Machines located in our warehouse in Lund/Sweden. please contact Editec AB.

Snack station / cover station For fast and flexible application! Model: 260 Stainless steel application cooling range +2 to + 8C Circulating air cooling HACCP compliant with protocol system Automatic defrostising is ready plug-in TOP Quality! Immediately available

Gastro Griddle plate with cabinet Gastro grill plate Griddleplate Cabinet with 4 countertop with 4cm edge Mass: HxBxT= 87x170x97cm Formore items can be found in our shop.

Sheet thickness: 8,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 0 mm MACH-id    4417 MAKE        Gasparini Italia TYPE           CO 3006 YEAR            2003 SPECIFICATIONS Guillotine / Lazer / Cutting table      Guillotine Cutting lenght         3100 mm Maximum sheet thickness         8 mm Backgauge stroke X in mm         1000 mm Power resonator kW / Amp       11 kW Controll        DELEM DAC Throat           500 mm DIMENSIONS Length          3300 mm Width           2800 mm Height          1900 mm  

Sheet thickness: 8,00 mm void: 0 Table length: 3000 mm Table width: 0 mm Knife length: 3000 mm MACH-id   4116 MAKE       Gasparini Italia TYPE         CO YEAR       2003 SPECIFICATIONS Controll    Digital read out Guillotine / Lazer / Cutting table     Hydraulic Cutting lenght       3100 mm Maximum sheet thickness       8 mm Throat           500 mm Backgauge stroke     X in mm      0 - 1000 mm Power resonator kW / Amp      11 kW DIMENSIONS Length       3100 mm Width         2100 mm Height       1900 mm

Stock number: UG6261 Used stainless steel vacuum pump by NSB Gas Processing AG (Switzerland) type PMZF 2507 D3 X3 in Ex design (EEx e II T3/ATEX). Pump is driven by el motor 6.8 kW, 1500 rpm, 400 V, 50 hz. Working output up to 150 m3/h and suction pressure up to 1000 mbar. Pump new 2011.

Gassner GA6 50t weighbridge with complete IT and printer equipment

Strength: 100T Folding length: 3000mm CNC: DELEM Working speed: 10mm/s State: good, fully working Status: visible

LIQUIDATION. Automatic hamburger forming machine, GASER brand, model R2000. SPECIFICATIONS Can be attached to any stuffer (30 mm outer diameter outlet). Place cellophane paper on both sides automatically and cut it in the same way as the hamburger or straight (depending on request). It produces 50 to 75 burgers/minute, depending on the speed of the stuffer and the type of dough. 108 mm round shaped burgers. Weight of the burgers from 70 to 130 grams (thickness adjustable by moving a screw). Consume cellophane coils. Pneumatic operation at 6 Kg/cm2. Air consumption 100 liters/minute. Electrical power 100 watts. Easy to clean. Dimensions: 850 x 580 x 1,300 mm. Machine weight (without conveyor belt): 70 Kg. Constructed of stainless steel. The simplest, most effective and economical technique. The machine is ready to plug in and work with. Burger Former, Hamburger Making  ...

Press brake Gasparini PBS 105 machine currently in production in excellent condition of use CNC Delem 65 maintenance performed by photocells year 2002

used refrigerated display case GGM Gastro Yasemin, Cake & Special Display Rayon, very good condition, very little used, display area 1.33 m², Climate Class CL3, weight approx. 300 kg, external dimensions: approx. 160 cm wide, approx. 85 cm deep, approx. 160 cm high, 230 V, 50 Hz, 1381 W, 7.84 A

Additional title: 1995-2003, Power: 0,1 kW, Voltage: 230 V, Frequency: 50 Hz, Features: Crown cap bunker; Typ: Basement BM1, y. o. c. 2003; crown cap bunker; Typ: Basement Typ GAMA, y. o. c. 1995; inclined beld conveyorTyp: SB 120, Baujahr: 1995 , Code: 448

used cooling table GGM Gastro EBBC3 GGM, very good condition, very little used, Ser.-Nr. 8102180586, year of construction 2021, 230 V, 50 Hz, 2.3 A, 593 W, Climate Class 4, in stainless steel version, weight approx. 180 kg, external dimensions: approx. 215 cm wide, approx. 55 cm deep, approx. 90 cm high

This GASPARINI XP 150/3000 Bending machine was manufactured in the 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting up. There is an issue with the software, and the control screen is black.

Conveyor belt, trough conveyor, trough conveyor GASUS type DG 300-5/2.75 Belt conveyor, conveyor belt, belt conveyor Fabrig No: D-7321915 Year of construction 1996 Usable length: 2.75 meters Belt width: 230/300 mm Deflection roller diameter: 210 / 230 mm (rubberized drive roller )Pulley width: 400 mm Belt speed: approx. 15 meters /min. Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz - Drive via SEW Geared motor inlet hopper 550 x 430 mm- Metal rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles- Rubber conveyor belt with corrugated edge - Conveyor belt has grooves - stable frame made of sheet steel- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 3000 x 950 x 700 mm Weight: 400 kg good condition; used

This GASPARINI 2040 Plasma Cutting Machine was manufactured in the year 2008 in Italy. It is equipped with a Plasma HYPERTHERM HPR 130. The machine has a cutting size of 4000x2000mm and the extension of the working area is of a 4000x2000mm. The max. sheet thickness is of 30mm and to be processed is of 60mm.

Conveyor belt, trough conveyor, trough conveyor probably GASUS type FB 400 x 5500 Belt conveyor, conveyor belt, belt conveyor Fabrig No: F-02071168 Year of construction 1996 Usable length: 5.5 meters Belt width: 400 mm Deflection roller diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters /min. Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - inlet hopper 600 x 400 mm - The support stations are recessed in 2 parts- Metal rollers with maintenance-free ball bearings - Band tension adjustable via threaded spindles- Rubber conveyor belt smooth - stable tubular frame made of steel - cover plate can be dismantled via conveyor belt- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg good condition; used

This machine is used for filling and closing round cups with the following dimensions: Outer dimensions height/opening diameter/bottom diameter: 89.7mm(+0.4mm)/⌀94.8mm(+-0.4mm)/60.5mm. Capacity: 400g, angle: 6°. Possible packaging formats: Cup: ⌀95mm, height=90mm, flat lid: ⌀95.5mm, snap-on lid: ⌀98.5mm. Filling: pasty to liquid foods.

With documentation, an inspection is possible.

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical locking system, 4,000/h screw caps, year of construction 2009 Vertical Silo Conveyor system for screw caps, feeder, feeding

Capacity: 25 t Opening maximum: 1250 mm Workpiece height maximum: 150 mm CNC Brand: Delem CNC Model: Delem DA-66W PressbrakeGASPARINI - X-Press 25 MACH-ID 7555  Max. bending length:        1250mm Distance between column:    1200mm Max. pressing force:        25T Dis. Beam - Table:          150mm Troth beam:                 340mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               200mm/min. Adjustment X-Axis back gauge:500mm Number of controlled axis:  5 Power:                      3kW Length:          &nb ...

Max. bending length 3000 mm Max. pressure 135 Ton Length of stroke 250 mm Control DELEM DA 66 W Rapid movement speed 0 - 100 mm/sec Pressing speed 0 - 10 mm/sec Main motor power 15 Kw

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

Dishwasher Dishwasher Model: R-Line 1500 Quick-Ready System Euronorm 500 2.4 litres of fresh water consumption 7 rinsing programs + 4 special rams Rinse aid and cleaner dosing pump extra deep interior for sheets/tubs 600 x 400 mm DGUV V3 tested Drain/drain pump Connection: 400 V, 8.8 kW, 16A-CEE plug Dimensions: 600 x 700 x 850 mm, WxDxH New machine with 12 months warranty Included accessories: 1 basket made of stainless steel (500x600 mm) 1 stainless steel insert for 5 sheets (600 x 400 mm) Inlet and outlet hoses Come to our large bakery equipment warehouse!

Dedusting filter, filter system, dust extraction W.A.M. / GASUS central extraction, extraction system, cartridge filter, pulse filter, silo filter type FRC. J MC.4.2 Year of construction 1996 Volume flow max. 1780 m³/h Filter area approx. 12 m² (8 pieces with 1.5 m² each) Suction connection at the filter inlet 100 mm Exhaust air connection at the filter outlet 160 x 110 mm Compressed air connection approx. 6 bar Motor power 1.5 kW Mains connection 400 volts, 50 Hz. - without complete filter control - pneumatic filter cleaning, control on the filter housing, 230 volts, 50 Hz. - 8 pieces of used filter cartridges 140 mm, length 920 mm- Maintenance flap 200 x 90 mm- Centrifugal fan on top of the filter unit, type MC.4.2 - Filter lower part with rotary flap closure - Operating instructions space requirement L x W x H 1100 x 1100 x 2820 mm Weight 170 kg good condition; used

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Collet holders: Ø 6-18 mm -Square collet chucks: 6-15 mm -Outer diameter: Ø 30 mm -Cone: Ø 40 mm -Cone length: 17 mm -Weight: 6 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Gast, rotary vane vacuum pump type 1550-V2A -Negative pressure: measured -0.7 bar -Total dimensions: 600/250/H385 mm -Weight: 30 kg

Flanged ball valve -Full passage with: mounting flange suitable for direct mounting -Flange: DN65 -Number: 1x available -Price: per piece -Dimensions: 170/185/H198 mm -Weight: 11.2 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 1.1 kW -Speed range: 370-1500 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 22 mm -Dimensions: 720/260/H310 mm -Weight: 62 kg

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition () Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upp ...

for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm Machine in good / well-maintained condition () Furnishing: - DELEM CNC control - model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPA ...

• Burger forming machine from the manufacturer GASER. • Model V3000 S/P – Paperless. • Specially manufactured for the production of hamburgers in round format, without paper. • It is a machine in perfect working order, with very few hours of work. Machine overhauled, reconditioned, tested and guaranteed. • Attaches to any stuffer. • Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

Hybrid press brake Builder: LAG (Gasparini Family) Model: GHT 185 x 3000 Bending power: 185 tons Folding length: 3050mm CNC: Y1, Y2, X, X3, Z1, Z2 Rear pneumatic supports for sheet metal WILA type upper connection with hydraulic tightening WILA type lower connection with hydraulic tightening Dynamic compensation table with front supports for sheet metal Safety laser New Electronics DELEM CNC touchscreen year of construction: 2020 working hours: 0

Nominal Work Force T 100 Delem Control Da 66w Useful Bending Length Mm 3200 Controlled Axes N. 7 Notice Mm 500 Distance Of Uprights Mm 2600 Distance Of Table-rest Mm 500 Rest Stroke Mm 300 Approach Speed Mm/sec 200 Ascent Speed Mm/sec 180 Working Speed Mm/sec 10 Motor Power Kw 11 Weight T 9 Complete With: N.2 Motorized Drivers On Linear Guides Managed By Cnc Controlled Hydraulic Crowning Complete With Use And Maintenance Books Complete With Ce Certification

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Automatic cap feeder for crown corks or aluminum caps, on feet, with level sensor and cover., Additional title: crown caps, aluminum screw caps, Material: stainless steel, Base construction: on feet, Features: level indicator

Description: GASPARINI XP 100/3000 CNC press brake - Pressure capacity 100 kN - Controlled axes: Y1/Y2 Cutter bar up and down, X1/X2 Stop bar forwards and backwards, Z1/Z2 Stop finger sideways, R Height stop bar, PS Front bending aid, DF Crowning lower tool, FD Side stop (X1/X2 individually controllable), X3 Stop finger individual adjustment The machine is equipped with: - Sheet metal lifting device - Pneumatic tool clamping for upper and lower tools - Angle measuring device - Documentation Attention : The top beam is approx. 1 mm round, however, which according to the manufacturer can be milled over. Equipment without tools! It is possible that the machine can be handed over a little earlier than week 22/2024. throat: 420 mm, bending length: 3,050 mm, control: DELEM DA-GGW, stroke: 400 mm, rare limit stop: 650 mm, weight approx.: 10,500 kg, Approx. Onsite Dimension. (l x w x h) ...

Inv. Num. : 6861 Type: X-Press 25 Producer: Gasparini Created: 2005 Parameters: Compressive force: 250 kN Maximum distance between the table and the ram: 340 mm Distance between frame walls: 1200 mm Maximum stroke: 150 mm Machine weight: 1770 kg

Working length: 3,050 mm Cutting capacity: 6 mm steel 4 mm stainless steel Backgauge range: 1,000 mm Cutting angle adjustment: 0.5 - 2.5 degrees Equipped with: - 4x sheet metal support arms - Foot pedal - Sheet metal holding device at the back - Safety light curtain at the back Country of origin: Italy Motor power: 7.5 kW Machine LxWxH: 3,500 x 2,200 x 1,700 mm Machine weight: 6.600 kg

weight max. in kg: 2500 kg stroke: 3050 mm fork length: 1200 mm load centre: 500 mm turning radius: 2444 mm driving speed: 22 km/h guage width: vorne 1008 mm guage width: hinten 932 mm weight of the machine ca.: 3,64 t dimensions of the machine ca.: 3,8 x 1,25 x 2,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width:approx. 300 mm plate thickness:approx 1,5 - 2,0 mm stations:8 column movement:80 mm Shaft adjustment - vertical -:170 The center height of lower roll is 234mm The longitudinal distance betwin roll centers is 600mm Available: only hardware from Gasparini + a hydraulic device and a small control cabinet for the cutting unit. There is no control cabinet or control included. No manufacturer number.

Stationaerer gas tank for heating system 2,800 litres Remaining capacity approx. 1,000 litres With foundation slab Last Pruefung faellig 2010 Free loaded truck Special price LPIque Propane LPG Vaillant White Head

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

with new (2019) Burny Lincoln Phantom II touchscreen control Burny 8 software center-center rail: 5000 mm cuttingwidth: 4000 mm 3 gas cutting heads, each adjustable in height Cutting table not included Longitudinal travel X-axis: 18 meter Cross travel Y-axis: 5 meter Gas cutter: 3x Read-out / Control: Burny 8 Lincoln Phantom II

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource