gas turbine generator used for sale

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

Francis turbine, used 40 kW, 3 m³, height 2m Speed 106 / 375 RPM 69 HP, built in 1963 Generator Schorch GmbH Type KT 7315 s FB01 Z-Z 50 Hz, 512U/min 55kW

Kaplan turbine used 50 kW, 3 m³, height 2m Speed 150 / 460 RPM 70 HP, built in 1963 Generator Schorch GmbH Type KT7280S - DB05 Z-Z 50 Hz, 770 RPM 55kW

HHI-BBC Turbine Housing RPM - 17400 Only the turbine hull.

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...

Manufacturer: Ansaldo Year of Manufacture: 1999 Technical Data Listing Generator - Type: Three-phase synchronous generator GSCR 800Y4 - Power: 7,250 KVA - Voltage: 10,500V - Frequency: 50 Hz - Phase Number: 3 - Number of Poles: 4 - Rated Current: 398.8A - Power Factor: 0.80 - Rated Speed: 1,500 rpm - Spin Speed: 1,800 rpm - Insulation Heat Resistance Class: F - Ambient Temperature: 40°C - Moment of Inertia of the Rotor: 118.75 kgm² - Winding Connection: Star - Excitation Voltage Rating: 41.2/158.3V - Rated Excitation Current: 54.2/152.3A - Operation Mode: Continuous - Protection Class: IP 4 - Cooling Water Quantity: 660 l/min - Cooling Water Inlet Temperature: 40°C - Cooling Water Inlet Pressure: 4 bar - Air Inlet Temperature: 45°C - Bearing Type: Rolling bearing - Bearing A-side: EMZLB18-200 - Bearing B-side: EMZLQ18-200 - Min. Clearance Shaft/Bearing: 0.267mm - Max. Clearance S ...

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

steam turbine RATED POWER 1824 KW SPEED 8490 1/min pressure 19,5 bar abs exhaust pressure 0,56 bar

FOR SALE steam turbine year 1997

Engine Brand: KAWASAKI, Conditie: USED, Engine Cooling Type: Oil Cooled , Engine Color: Grey , Working Hours: 1232 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1180 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1250 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 1804 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/203827, , = More information =, , Empty weight: 12.000 kg, Type number: Kawasaki M1A-01 GENERATOR 1250 K

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Used 3-station turbine packing machine. Dose range 5-50 kg, has a pickup conveyor and a bag-forming conveyor. YOM 90's.

78 MW- 50 HZ

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 "Bearing oil plant, pumps, "VEB Apparatebau Leisnig-Tragnitz; Filter Cooler" VEM, Siemens, VEB EKM and KSB" 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - / Contact us at -

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Key Details: • Turbine: Solar Centaur 40 (Dual Fuel: Natural Gas & Diesel) • Power Rating: 3.5 MW • Total Running Hours: 40,000 since the last overhaul • Alternator: Hyundai, Air-Cooled, 3,500 kW, 50 Hz, 3,300V • Heat Recovery Boiler: Nebraska, 22-ton capacity • Gas Compressor & Control Panel included Spare parts available. Find more here - / Contact us at -

MAN Gas Generator in Box Manufacturer : MAN Rated Output Power : 350 KVA Speed :1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : Used Fuel : Gas Cylinder : 12 Cylinder Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd 00447956518924

Key data: 250 KW, 250 kVA, 400 V

Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

Key data: 500 KW, 625 kVA, 400 V

MODEL: EQ-BG625500 ENGINE: 12M26D605E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 625(kVA) / 500(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 5040kg DIMENSIONS L/W/HEIGHT (MM): 374714861909 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with you ...

Key data: 1600 KW, 1935 kVA, 400 V

We are selling our complete containerized Natural Gas power plant based on a MTU 4000 V16 gensets with 1600 KW power output. The power plant has a total working hours from new of 40 800

Natural Gas Power Plant 58.3 MW / 50 Hz Wartsila 6 × 20V34SG with Auxiliaries This power plant was originally built by Wärtsilä in 2011 as a turnkey project without heat recovery boilers. Later, the owner added 4 × 3.7 MW / 18 bar exhaust gas steam boilers with auxiliaries, which are available as optional items. The plant was in operation until 2017, accumulating between 22,000 and 24,000 operating hours per engine. All scheduled services were performed by Wärtsilä Service, including the 16,000-hour and 24,000-hour services, completed just prior to dismantling in 2021. This ensures that the gensets are fully maintained and do not require servicing before re-commissioning. After shutdown, all equipment—including cables, pipes, and OEM modules—was professionally dismantled, tested, packed for transportation, and placed in storage. Control cabinets are stored in a heated  ...

Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty

Natural Gas Generator Niigata 2 x 2880 kW / 60 Hz with Auxiliaries Two well maintained natural gas generators manufactured by Niigata in 2005, electrical capacity 2 x 2880 kW / 60 Hz. The plant was operated till 2020 and maintained according to Niigata maintenance instruction, last scheduled 30000 hour maintenance for both engines was carried out in April 2019. Plant was professionally dismantled on 2022 and total 31000 operating hours with mechanical and electrical indoor auxiliaries. Plant control system, mechanical indoor auxiliaries, HV breakers and MCC cabinets belongs to the scope of supply Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets 2 pcs Running hours approx. 31100 – still in operation Voltage 3450V / 60 Hz Frequency 60Hz Alternator ...

Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours

Key data: 5760 KW, 3450 V

Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets  ...

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Dungs gas valve, used, 24 V, DN 50

STEAM BOILER - GAS FIRED MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

90KW AND 120KW CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)

Here is the German translation of your text: This LPG tank with a capacity of 6400 litres is designed for the safe storage of LPG and meets the strictest European standards. It is manufactured in accordance with the Pressure Equipment Directive (PED) – 2014/68/EU and the EN 13110 standard, which applies to above-ground or underground stationary liquid gas tanks. ✅ Capacity: 6400 liters ✅ Compliance: PED 2014/68/EU ✅ Standard: EN 13110 – Stationary LPG tanks ✅ Installation: Above ground or underground possible Optionally, we offer: Compatible valves and accessories A metal frame for the installation of the tank

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Safety valve Handtmann DN 32 Steam/ Gas Input DN 25 Output DN 32 Length 270 Material stainless steel 1.4307 Pressure 0.2-2.5 bar

Gas-heated conveyor belt furnace

type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Pasteur 500l/h Gas newly overhauled automatic temperature control

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Machine Type: Forging Fire Manufacturer: Pharos Hamburg Type: follows Year of manufacture: coming soon Condition: used / from training equipment Offer will only be sent if a complete imprint is provided! Price Vb Location Warstein , Germany Reference M-PHA-0225 DESCRIPTION We offer you a used gas stove / forge fire from the manufacturer Pharos Hamburg. Technical data will follow. Available from the beginning of mid-February. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!