british flag
Resale Logo

gas generator used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machinery for the dewatering market   REWA Gruppe  http://www.rewa-gruppe.de 
banner logo
start page > keywords gas generator > results
498 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125843086 1101  

WARTSILA GENERATOR 35 MW for sale
Gas generators


35 MW Wartsila 20V34SG Natural Gas Generator Plant 35 MW Wartsila 20V34SG Cogeneration Natural Gas Power Plant, Consists of four (4) 8730 KW Wartsila 20V34 SG Gas Engines coupled to AVK alternators, 50 HZ, 11 KV, 3,000  ...

 
35 MW Wartsila 20V34SG Natural Gas Generator Plant
35 MW Wartsila 20V34SG Cogeneration Natural Gas Power Plant, Consists of four (4) 8730 KW Wartsila 20V34 SG Gas Engines coupled to AVK alternators, 50 HZ, 11 KV, 3,000 hours after Major Overhaul, Complete Plant with Compressors, Transformers, Cooling towers, (4) Boilers, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Pumps, Exhaust Gas System, all auxiliaries and much more equipment. Well maintained by OEM since new with all service records on site.
 
Price  
  NA   request
125756514 104

STUDER S 140 CNC for sale
Internal Grinding Machine


internal diameter: 100 mmgrinding depth: - mmswing diameter: - mmgrinding diameter: 120 mmgrinding length: 110 mmcentre height: mmcontrol: Siemens 840 D total power requirement: 56 kWweight of the machine ca.: 6 tdimens ...
used machine
 
internal diameter: 100 mm
grinding depth: - mm
swing diameter: - mm
grinding diameter: 120 mm
grinding length: 110 mm
centre height: mm
control: Siemens 840 D
total power requirement: 56 kW
weight of the machine ca.: 6 t
dimensions of the machine ca.: 4,8 x 3,8 x 2,2 m
STUDER S140 - CNC cylindrical I/D grinding machine with Q-axis
(3 spindles ? two installed)

DESCRIPTION

Hours 52,966

Current state very good / very precise

Max grinding I/D diameter 100 mm
Software version: SIEMENS 840D V2-01
Maximum/average power requirement 56 kVa/28 kVa
Voltage 3x 380 ±10Volt / 50 Hz
Weight of the machine ca. 6,0 t

Dimensions of basic machine 2,560 x 1,810 x 2,200
Footprint of working area. 4,810x 3,800x 2,200 mm

Coolant system: Oil
Fire extinction Automatic CO2 Total Walter K8
Backup fire extinguishing system Inert gas generator (military type)
Sensitron touching system Diettel M5000
Three spindles Two installed 2 x F 120 mm / GMN 90,000 RPM + 45,000 RPM
Converters ACOMEL
Two high frequency dressing spindles
Technical specifications
Very rigid Granitan S103 machine bed
X axis max travel 300 mm
X axis rapid feed 15,000 mm/min
X axis resolution 0.0001 mm
Z axis max travel 300 mm
Z axis rapid feed 15,000 mm/min
Z axis resolution 0.0001 mm
Q axis
Workhead speeds 0-1,000 rpm continuous

Collet clamping system Powerhold pneumatic, - the original hydraulic system
left in place, but disabled.
Workhead taper MK5
Documentation files for commissioning, safety rules, operating,
programming, maintenance, electrical diagrams.




This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125843085 1103

GE LM6000 Gas Turbine for sale
Gas Turbine CC Power Station


120 MW LM6000 PC Gas Turbine Power Plant 120 MW LM6000 PC combined cycle power plant consists of (2) 47 MW LM6000 PC Gas Turbines, Year 2007, 50 HZ, 11.5KV. HRSG, Steam Turbine, electrical systems, control systems, air  ...

 
120 MW LM6000 PC Gas Turbine Power Plant
120 MW LM6000 PC combined cycle power plant consists of (2) 47 MW LM6000 PC Gas Turbines, Year 2007, 50 HZ, 11.5KV. HRSG, Steam Turbine, electrical systems, control systems, air system, cooling system, starting system, lubricating system, air compressors, demineralization unit, switch room, transformers, pumps and much more. The LM6000 PC gas turbine power plant is a complete plant that has been well maintained since installation on site. Can be seen in operation.
 
Price  
  US   request
125756516 104

STUDER S 140 CNC for sale
Cylindrical Grinding Machine - Universal


grinding diameter: 120 mmgrinding length: 110 mmcontrol: Siemens 840 D total power requirement: 56 kVAweight of the machine ca.: 6 tdimensions of the machine ca.: 4,8 x 3,8 x 2,2 mSTUDER S140 - CNC cylindrical OD + ID gr ...
used machine
 
grinding diameter: 120 mm
grinding length: 110 mm
control: Siemens 840 D
total power requirement: 56 kVA
weight of the machine ca.: 6 t
dimensions of the machine ca.: 4,8 x 3,8 x 2,2 m
STUDER S140 - CNC cylindrical OD + ID grinding machine

DESCRIPTION
Built in 2002 Hours 56,760

Current state Not in operation ? in good mechanical condition /

Conversion from Acomel to Vacon not yet completed

Missing couple of Heidenhein scales.

Max I/D grinding diameter 100 mm
Max O/D grinding diameter 120 mm
Max O/D grinding length 110 mm
Control SIEMENS 840D V2-01
Simultaneous I/D and O/D operation
Maximum/average power requirement 56 kVa/28 kVa
Connection 50 Hz 3x 400 ±10Volt
Weight of the machine ca. 6,0 t
Dimensions of basic machine 2,560 x 1,810 x 2,200
Footprint of working area. 4,810x 3,800x 2,200 mm

Coolant system: Oil
Automatic CO2 fire extinction system Total Walter K8
Backup fire extinguishing Inert gas generators (military type)
Sensitron touching system Dittel M5000
One spindle F 120 mm / GMN 90,000 RPM installed
Converter for I/D spindle Vacon + software purchased, to be installed by Studer.
High frequency diamond dressing dressing spindle

Technical specifications
Very rigid Granitan S103 machine bed
X axis max travel 300 mm
X axis rapid feed 15,000 mm/min
X axis resolution 0.0001 mm
X2 axis max travel 100 mm
X2 axis rapid feed 15,000 mm/min
X2 axis resolution 0.0001 mm
Z axis max travel 300 mm
Z axis rapid feed 15,000 mm/min
Z axis resolution 0.0001 mm
Z2 axis max travel 100 mm
Z2 axis rapid feed 15,000 mm/min
Z2 axis resolution 0.0001
Workhead RPM 0-1,000 rpm continuous
Collet clamping system Powerhold ? pneumatic (the original hydraulic systemleft
in
place, but disabled.)
Workhead taper MK5
Wheel head angle 30°
Maximum wheel diameter 400 mm
Maximum wheel width 32 mm
Wheel bore 127 mm
Wheel RPM up to 3,150 rpm (programmed by peripheral speed)

Documentation files for commissioning, safety rules, operating, programming,
maintenance, electrical diagrams.



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125837677 1103

GE LM6000 PC 60 MW for sale
Gas Turbine CC Power Station


60 MW GE LM6000 PC Gas Turbine Power Plant 50 MW GE LM6000 PC gas turbine, Year of manufacture: 2011, Hours since new: 7000 hrs., 3000 rpm, 50 HZ, 13 MW Siemens SST 300 steam turbine, Year of manufacture: 2012, Hours s ...

 
60 MW GE LM6000 PC Gas Turbine Power Plant
50 MW GE LM6000 PC gas turbine, Year of manufacture: 2011, Hours since new: 7000 hrs., 3000 rpm, 50 HZ, 13 MW Siemens SST 300 steam turbine, Year of manufacture: 2012, Hours since new: 5000 hrs, transformers, electrical systems, control systems, air system, cooling system, starting system, lubricating system, air compressors, HV System, MV System, LV System, ABB Pumps, Demi Water Systems, fire fighting system and much more. Complete plant in new condition, can be inspected in operation.
 
Price  
  NA   request
125756521 104

STUDER S 140 CNC for sale
Cylindrical Grinding Machine - Universal


grinding diameter: 120 mmgrinding length: 110 mmcentre height: - mmcontrol: Siemens 840 D total power requirement: 56 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4,8 x 3,8 x 2,2 mSTUDER S140 - CNC cyli ...
used machine
 
grinding diameter: 120 mm
grinding length: 110 mm
centre height: - mm
control: Siemens 840 D
total power requirement: 56 kW
weight of the machine ca.: 6 t
dimensions of the machine ca.: 4,8 x 3,8 x 2,2 m
STUDER S140 - CNC cylindrical OD + I/D grinding machine

Hours 38,760

Current state very good / very precise

Max I/D grinding diameter 100 mm
Max O/D grinding diameter 120 mm
Max O/D grinding length 110 mm
Control SIEMENS 840D V2-01
Simultaneous I/D and O/D operation
Maximum/average power requirement 56 kVa/28 kVa
Voltage 3x 380 ±10Volt / 50 Hz
Weight of the machine ca. 6,0 t

Dimensions of basic machine 2,560 x 1,810 x 2,200
Footprint of working area. 4,810 x 3,800 x 2,200 mm

Coolant system Oil
Automatic CO2 fire extinction system Total Walter K8
Backup fire extinguishing Inert gas generators (military type)
Sensitron touching system Dittel M5000
Original spindle F 120 mm / GMN 60,000 RPM installed
Adapted additional spindle F 100 mm Sliding / GMN 90,000 RPM installed
Software quoted CHF 20,000 by Studer
Converter for I/D spindle Acomel - defective
High frequency diamond dressing spindle
Sensitron touching system Dittel M5000

Technical specifications
Very rigid Granitan S103 machine bed
X axis max travel 300 mm
X axis rapid feed 15,000 mm/min
X axis resolution 0.0001 mm
X2 axis max travel 100 mm
X2 axis rapid feed 15,000 mm/min
X2 axis resolution 0.0001 mm
Z axis max travel 300 mm
Z axis rapid feed 15,000 mm/min
Z axis resolution 0.0001 mm
Z2 axis max travel 100 mm
Z2 axis rapid feed 15,000 mm/min
Z2 axis resolution 0.0001
Workhead RPM 0-1,000 rpm continuous
Collet clamping system Powerhold pneumatic, - the original hydraulic
system left in place, but disabled.
Workhead taper MK5
Wheel head angle 30°
Maximum wheel diameter 400 mm
Maximum wheel width 32 mm
Wheel bore 127 mm
Wheel RPM up to 3,150 rpm (programmed by peripheral speed)

Documentation files for commissioning, safety rules, operating, programming,
maintenance, electrical diagrams.



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125837676 1103

SIEMENS SGT-800 200 MW for sale
Gas Turbine CC Power Station


200 MW Siemens SGT-800 Gas Turbine Power Plant Three (3) Siemens SGT 800 Gas Turbines, Siemens Steam Turbine, 3000 rpm, 50HZ, Commissioned Year: 2013, Total operating Hours, 21,000, Hours ran after last inspection 250 ...

 
200 MW Siemens SGT-800 Gas Turbine Power Plant
Three (3) Siemens SGT 800 Gas Turbines, Siemens Steam Turbine, 3000 rpm, 50HZ,
Commissioned Year: 2013, Total operating Hours, 21,000, Hours ran after last inspection 2500 hrs. (3) HRSG, RMS station, HV switchyard,, electrical systems, control systems, air systems, cooling systems, compressor systems, pumps, starting system, lubricating system, fire fighting system and much more. Complete plant, can be inspected in operation.
 
Price  
  NA   request
125678530 1900

Workbench


Weight approx.: 500 kgDimensions (l x w x h) approx.: 3000 x 900 x 920 mmDescription: With vices, generator, toolbox and gas bottle trolley. See photo

 
Weight approx.: 500 kg
Dimensions (l x w x h) approx.: 3000 x 900 x 920 mm
Description: With vices, generator, toolbox and gas bottle trolley. See photo
 
used machinery auction RESALE 510 €  
  IT   request
125837675 1103

Pratt & Whitney 80 MW for sale
Gas Turbine CC Power Station


80 MW Pratt & Whitney FT8 Gas Turbine Power Plant Two (2) 29 MW Pratt Whitney FT8-3 Swiftpack single shaft gas turbines with air cooled brush generators, Fuel: Natural Gas (NG), 3000 rpm, 50 HZ, commissioned in 2010, 2  ...

 
80 MW Pratt & Whitney FT8 Gas Turbine Power Plant
Two (2) 29 MW Pratt Whitney FT8-3 Swiftpack single shaft gas turbines with air cooled brush generators, Fuel: Natural Gas (NG), 3000 rpm, 50 HZ, commissioned in 2010, 2 Steam turbines included in this package, transformers, condensers, electrical systems, control systems, cooling systems compressor systems, starting system, lubricating system, fire fighting system and much more. Complete plant in excellent condition.
 
Price  
  NA   request
125333038 1101

KIPOR KDE6500E3 for sale
Power generators


KIPOR generator According to the manufacturer Technical data Kipor KDE6500E3 diesel generator Frequency response (Hz) 50 Stable and average output voltage (V) 230 / 400 Stable/average output current (A) 7.9 Engine  ...

 
KIPOR generator
According to the manufacturer
Technical data Kipor KDE6500E3 diesel generator
Frequency response (Hz) 50
Stable and average output voltage (V) 230 / 400
Stable/average output current (A) 7.9
Engine revolutions per minute (r/min) 3000
Stable and average output power (kVA) 5.5
Maximum output power (kVA) 6.0
DC Gleichtsrom output K.a..
Phase 3
Ignition type diesel
Generator type of cantilever diesel generator
Capacity of the tank (L) 13.5
Fuel consumption? g/kW.h? 275
At average load continuous run time approx. 8 hours (per tank of gas)
Geräuchpegel (zero load ~ full load) dB (A) / 7 m ~ 79 (factory specification)
Dimensions (L × W × H) (mm) 720 × 492 × 655
Net weight (kg) approx. 115
Start System/starter motor electric start
Fuel diesel
Lube SAE15 / W40 or better
Engine model KM178FA
Engine type 1 cylinder, 4-stroke, diesel engine with patented air cooling system
Bore of 86 × 72
Displacement (ml) 418
Compression ratio 19:1
Engine power [kW(PS)] 5.7 (7.75 HP)
K.a. ignition type.
 
1,600 €  
    request
125837673 1101

WARTSILA PLANT 95 MW for sale
Gas generators


95 MW Wartsila Natural Gas Generator Power Plant Consists of (12) Wartsila 20V34SG Natural Gas Engines and ABB Alternators, Fuel: Natural Gas, Year 2005 and 2009, 11 KV, 50 HZ, Cooling system, Lubricating Oil System,  ...

 
95 MW Wartsila Natural Gas Generator Power Plant
Consists of (12) Wartsila 20V34SG Natural Gas Engines and ABB Alternators,
Fuel: Natural Gas, Year 2005 and 2009, 11 KV, 50 HZ, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc. Complete plant with all auxiliaries. Well maintained by OEM since new with all service records on site. Contact us to set up an inspection.
 
Price  
  NA   request
124271030 2200

METU rd 32 verz. Standart mit Polyethlendich for sale
27 x inspection cover


We offer from a business resolution 27 x METU revision cover rd 32. Standard with Polyethlendichtung Manufacturer: METU for cutting: 300 x 200 mm Weight: approx. 27 kg / 27 pieces New price. CA. EUR260 Condi ...

 
We offer

from a business resolution

27 x METU revision cover rd 32. Standard with Polyethlendichtung

Manufacturer: METU
for cutting: 300 x 200 mm
Weight: approx. 27 kg / 27 pieces
New price. CA. EUR260
Condition: from camp, unused, ready for use, see photos

Furthermore we offer:

-Belimo NF24A-S2 spring return actuator, damper actuator, on-off, AC/DC 24 v, 10 nm, with 2 integrated auxiliary contacts
-Damper TROX JZ-G 120 x 90 x 12 air outlet flap ventilation grille
-Damper TROX JZ-G 60 x 90 x 12 air outlet flap ventilation grille
-Professional Wetrkbank 150 x 50 x 90 cm 40mm plate Vice 150 mm
-Forklift Linde E 16-01 trip lex mast year 2007 tricycle bra 10016
-Forklift Linde H30T with gas tank, 2005, trip lex mast bra approx. 10000 h
-Shears WMW VEB Fritz Heckert type ScTP 16 x 3150 BJ. 1984
-Grundfos Magna 65-60 F 340 mm Energiesparpumpe / circulation pump with shut-off valve
-Notching machine with adjustable angles up to 4 mm
-Eccentric press Ambold to EDSP 55, pressing force 55 MP thickness up to 4, 5 mm
-Eccentric press Hamilton 40SKR, pressing force: 40 t
-Forklift Yale GLP16 AF duplex mast year 98 Sideshift
-Cross traverse MKF with adjustable hook 1200 kg d = 500-1400 mm
-Portable power distribution centre Steidele V 40/3 5
-Bending machine banning
-Heat exchanger air heater fan heater GEA Happel 87 kW 9840 m³/h
-Emergency power generator 270 kVA need of repair in the container motor MB < b
 
130 €  
    request
125837671 1101

WARTSILA PLANT 60 MW for sale
Gas generators


60 MW Wartsila Natural Gas Generator Power Plant Consists of (6) 9730 KW Wartsila 20V34SG Natural Gas Engines and AVK Alternators, Fuel: Natural Gas, Year 2011, 11 KV, 50 HZ, low running hours. Cooling system, Lubric ...

 
60 MW Wartsila Natural Gas Generator Power Plant
Consists of (6) 9730 KW Wartsila 20V34SG Natural Gas Engines and AVK Alternators,
Fuel: Natural Gas, Year 2011, 11 KV, 50 HZ, low running hours. Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc. Complete plant with all auxiliaries. Well maintained by OEM since new with all service records on site. Contact us to set up an inspection.
 
Price  
  NA   request
119593160 106

Production Line for Pipe bends / elbows


Weight approx.: 10000 kgDimensions (l x w x h) approx.: 11000 x 2000 x 1500 mmDescription: Turn dimensions 2 D/SR 60.3 - 193.7 mm, 3 D/LR 60.3 - 193.7 mm, 5 D 60.3 - 177.8 mm, heating exclusively with gas flame, 2 gas je ...

 
Weight approx.: 10000 kg
Dimensions (l x w x h) approx.: 11000 x 2000 x 1500 mm
Description: Turn dimensions 2 D/SR 60.3 - 193.7 mm, 3 D/LR 60.3 - 193.7 mm, 5 D 60.3 - 177.8 mm, heating exclusively with gas flame, 2 gas jets, 5 gas furnaces, 3 piston shafts, hydraulic piston diameter 200 mm, piston bar diameter 175 mm, pressing force 125 t, nominal stroke 2680 mm, feed max. 0.48 m/min, hydraulic unit, operating pressure max. 200 bar, electric welding current generator DALEX, 2 piston shafts, 1 x diameter 60 mm, length 9750 mm, 1 x diameter 50 mm, length 10000 mm
 
Price  
  DE   request
125837670 1101

WARTSILA PLANT 140 MW for sale
Gas generators


140 MW Wartsila Natural Gas Generator Power Plant Complete Natural Gas Power Generation Plant in new condition with only 1300 hours of operation, equipment manufactured in 2012. Plant has (13) 9730 KW Wartsila 20V34GS N ...

 
140 MW Wartsila Natural Gas Generator Power Plant
Complete Natural Gas Power Generation Plant in new condition with only 1300 hours of operation, equipment manufactured in 2012. Plant has (13) 9730 KW Wartsila 20V34GS Natural Gas reciprocating engines with AVK Alternators, Fuel Natural Gas, 11 KV, 50 HZ, Siemens Steam Turbine Heat Recovery Boiler, Exhaust system, Cooling system, Lubricating Oil System, Control system, Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and much more. Complete plant is barely used in New condition with only 1300 hours. This exceptional 140 MW Wartsila Plant is being sold below the cost of New with a substantially financial loss to owners. The plant will not disappoint any serious buyer. Contact us to set up an inspection on this great opportunity to purchase a plant in this condition.
 
Price  
  US   request
119579716 1101

MOSA GE 3000 SX for sale
Generator


rated capacity: 2,5 kVA type of fuel: Benzin , Gasoline revolution per minute: Motor: 3000 U/min weight of the machine ca.: 0,05 t space requirements of the machine approx.: 0,57x0,42x0,45 m Motor: Honda GX 160gasoline3, ...

 
rated capacity: 2,5 kVA
type of fuel: Benzin , Gasoline
revolution per minute: Motor: 3000 U/min
weight of the machine ca.: 0,05 t
space requirements of the machine approx.: 0,57x0,42x0,45 m
Motor: Honda GX 160
gasoline
3,6l content of tank
Generator: type Sincro EP2 72L; 2,5 kVA, capacity 230V; 10,8A;
noise reduced, syncron
start via : recoil starter
socket : 1x earthing contact and 1 x CEE 16A / 230V
device has been tested
[...]
 
Price  
    request
125837669 1107

GE TM 2500 Mobile Turbine for sale
Portable Generator


30 MW TM 2500 Mobile Trailer Mounted Gas Turbine Three (3) NEW 30 MW GE TM2500 Mobile Trailer Mounted Gas Turbines Generators Developed specifically to respond to the need of fast deployment and electricity supply. E ...

 
30 MW TM 2500 Mobile Trailer Mounted Gas Turbine

Three (3) NEW 30 MW GE TM2500 Mobile Trailer Mounted Gas Turbines Generators Developed specifically to respond to the need of fast deployment and electricity supply. Electricity can be generated immediately even to the most remote locations around the world. Full power in <10 minutes, 37% efficiency. Trailer mounted, weather proof acoustic enclosures. Small Footprint 78’ x 21’, 87 dBA average noise level, Flexible dual fuel, natural gas and liquid distillate fuels, Dual Frequency 50/60 Hz, Low emissions with demineralised water injection 25 ppm (gas)/42 ppm (liquid), Easy to operate and maintain, Output: 29.5 MW at 60 Hz (ISO), 27.6 MW at 50 Hz, Complete with warranty. Great Opportunity to purchase New power equipment below the price of new. Super investment with lucrative financial return.
 
Price  
  NA   request
119579726 1107

DEUTZ MWM Generator type GAS for sale
Generator


production capacity: - number of Generators: - type of fuel: Gas fuel tank capacity: - revolutions per minute of the motor:: 1500 U/min rated capacity: 542 kWel KW Number of working hours: ca. 90 000 h Number of cylinder ...
used machine
 
production capacity: -
number of Generators: -
type of fuel: Gas
fuel tank capacity: -
revolutions per minute of the motor:: 1500 U/min
rated capacity: 542 kWel KW
Number of working hours: ca. 90 000 h
Number of cylinders: 16 Stück
weight: ca. 5650 kg
dimensions L x W x H: ca. 5000x1500x1950 mm
offered is a CHP-Plant (Combined Heating and Power Plant) make Deutz WMW. Generator Type : GAS
The CHP Plant has an electric capacity of 542 KWel. First start up of this plant was 1996. Fuel which can be used with this plant are following: bio gas , natural gas, sewage gas, landfill gas
The location of the plant is in Leipzig.
motor type : serial number 61886300128

contact person Mr. Kies


1998
Price  
    request
125837668 1101

Wartsila 50 DF & 20SV34SG Generators for sale
Gas generators


70 MW Wartsila Natural Gas Generator Plant Complete plant that has Total Power:70840 KW, Total Hot Water production 360 ton/h Total Steam:35 ton/h, (6) Six Wartsila Natural Gas and Dual Fuel Generator sets (4) 8730 kW  ...

 
70 MW Wartsila Natural Gas Generator Plant
Complete plant that has Total Power:70840 KW, Total Hot Water production 360 ton/h
Total Steam:35 ton/h, (6) Six Wartsila Natural Gas and Dual Fuel Generator sets (4) 8730 kW Wartsila 20SV34SG Natural Gas Generator Sets, 2009, (2) 16650 KW Wartsila 50 DF Generator sets (Natural Gas, Light Fuel Oil & Heavy Fuel Oil) Year 2010, 514 rpm, 50 HZ, Siemens Steam Turbine, Boilers, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc.
 
Price  
  NA   request
119579808 1107

BHKW MARBACH for sale
Generator ? Power Plant


production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ Complete Power Plant2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDGfor oil and gas2 Generators M ...
used machine
 
production capacity: 2x 4,8 MW
number of Generators: 2 Stück
fuel tank capacity: 480 m³
Complete Power Plant
2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG
for oil and gas
2 Generators Make Leo Somer with
electrical capacity 4,6 MW each
mechanical capacity 4,8 MW each
thermal capacity 4,8 MW each
2 recovery boiler
furthermore:
heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant,
intermediate storage tank + fuel depot tanks 4,8 m³
1994
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Gas engines MWM TCG 2020V16


Stok Genset for sale, never used with 0 hours, with basic scope of supply: Engine Base frame Alternator TEM System Gas train

Gas generators Wartsila Generator Plant 35 MW


35 MW Wartsila 20V34SG Natural Gas Generator Plant 35 MW Wartsila 20V34SG Cogeneration Natural Gas Power Plant, Consists of four (4) 8730 KW Wartsila 20V34 SG Gas Engines coupled to AVK alternators, 50 HZ, 11 KV, 3,000 hours after Major Overhaul, Complete Plant with Compressors, Transformers, Cooling towers, (4) Boilers, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Pumps, Exhaust Gas System, all auxiliaries and much more equipment. Well maintained by OEM since new with all service records on site.

Gas Turbine CC Power Station GE LM6000 Gas Turbine


120 MW LM6000 PC Gas Turbine Power Plant 120 MW LM6000 PC combined cycle power plant consists of (2) 47 MW LM6000 PC Gas Turbines, Year 2007, 50 HZ, 11.5KV. HRSG, Steam Turbine, electrical systems, control systems, air system, cooling system, starting system, lubricating system, air compressors, demineralization unit, switch room, transformers, pumps and much more. The LM6000 PC gas turbine power plant is a complete plant that has been well maintained since installation on site. Can be seen in operation.

Gas Turbine CC Power Station GE LM6000 PC 60 MW


60 MW GE LM6000 PC Gas Turbine Power Plant 50 MW GE LM6000 PC gas turbine, Year of manufacture: 2011, Hours since new: 7000 hrs., 3000 rpm, 50 HZ, 13 MW Siemens SST 300 steam turbine, Year of manufacture: 2012, Hours since new: 5000 hrs, transformers, electrical systems, control systems, air system, cooling system, starting system, lubricating system, air compressors, HV System, MV System, LV System, ABB Pumps, Demi Water Systems, fire fighting system and much more. Complete plant in new condition, can be inspected in operation.

Gas Turbine CC Power Station Siemens SGT-800 200 MW


200 MW Siemens SGT-800 Gas Turbine Power Plant Three (3) Siemens SGT 800 Gas Turbines, Siemens Steam Turbine, 3000 rpm, 50HZ, Commissioned Year: 2013, Total operating Hours, 21,000, Hours ran after last inspection 2500 hrs. (3) HRSG, RMS station, HV switchyard,, electrical systems, control systems, air systems, cooling systems, compressor systems, pumps, starting system, lubricating system, fire fighting system and much more. Complete plant, can be inspected in operation.

Gas Turbine CC Power Station Pratt & Whitney 80 MW


80 MW Pratt & Whitney FT8 Gas Turbine Power Plant Two (2) 29 MW Pratt Whitney FT8-3 Swiftpack single shaft gas turbines with air cooled brush generators, Fuel: Natural Gas (NG), 3000 rpm, 50 HZ, commissioned in 2010, 2 Steam turbines included in this package, transformers, condensers, electrical systems, control systems, cooling systems compressor systems, starting system, lubricating system, fire fighting system and much more. Complete plant

Gas generators Wartsila Plant 95 MW


95 MW Wartsila Natural Gas Generator Power Plant Consists of (12) Wartsila 20V34SG Natural Gas Engines and ABB Alternators, Fuel: Natural Gas, Year 2005 and 2009, 11 KV, 50 HZ, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc. Complete plant with all auxiliaries. Well maintained by OEM since new with all service records on site. Contact us to set up an inspection.

Gas generators Wartsila Plant 60 MW


60 MW Wartsila Natural Gas Generator Power Plant Consists of (6) 9730 KW Wartsila 20V34SG Natural Gas Engines and AVK Alternators, Fuel: Natural Gas, Year 2011, 11 KV, 50 HZ, low running hours. Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc. Complete plant with all auxiliaries. Well maintained by OEM since new with all service records on site. Contact us to set up an inspection.

Gas generators Wartsila Generator Plant 140 MW


140 MW Wartsila Natural Gas Generator Power Plant Complete Natural Gas Power Generation Plant in new condition with only 1300 hours of operation, equipment manufactured in 2012. Plant has (13) 9730 KW Wartsila 20V34GS Natural Gas reciprocating engines with AVK Alternators, Fuel Natural Gas, 11 KV, 50 HZ, Siemens Steam Turbine Heat Recovery Boiler, Exhaust system, Cooling system, Lubricating Oil System, Control system, Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and much more. Complete plant is barely used in New condition with only 1300 hours. This exceptional 140 MW Wartsila Plant is being sold below the cost of New with a substantially financial loss to owners. The plant will not disappoint any serious buyer. Contact us to set up an inspection on this great opportunity to purchase a plant in this condition.

Portable Generator GE TM 2500 Mobile Turbine


30 MW TM 2500 Mobile Trailer Mounted Gas Turbine Three (3) NEW 30 MW GE TM2500 Mobile Trailer Mounted Gas Turbines Generators Developed specifically to respond to the need of fast deployment and electricity supply. Electricity can be generated immediately even to the most remote locations around the world. Full power in <10 minutes, 37% efficiency. Trailer mounted, weather proof acoustic enclosures. Small Footprint 78’ x 21’, 87 dBA average noise level, Flexible dual fuel, natural gas and liquid distillate fuels, Dual Frequency 50/60 Hz, Low emissions with demineralised water injection 25 ppm (gas)/42 ppm (liquid), Easy to operate and maintain, Output: 29.5 MW at 60 Hz (ISO), 27.6 MW at 50 Hz, Complete with warranty. Great Opportunity to purchase New power equipment below the price of new. Super investment with lucrative financial return.

Gas generators Wartsila 50 DF & 20SV34SG Generators


70 MW Wartsila Natural Gas Generator Plant Complete plant that has Total Power:70840 KW, Total Hot Water production 360 ton/h Total Steam:35 ton/h, (6) Six Wartsila Natural Gas and Dual Fuel Generator sets (4) 8730 kW Wartsila 20SV34SG Natural Gas Generator Sets, 2009, (2) 16650 KW Wartsila 50 DF Generator sets (Natural Gas, Light Fuel Oil & Heavy Fuel Oil) Year 2010, 514 rpm, 50 HZ, Siemens Steam Turbine, Boilers, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc.

Gas Turbine CC Power Station GE LM2500 Gas Turbine Parts


31 MW GE LM2500 Gas Turbine Parts or Repair General Electric LM2500+HSPT 31132 kW, Commissioned in 2004, Natural Gas, Brush Generator rated at 47500 KVA, 50 HZ, 11500V, Turbine package can be put into service or used for spares for an already existing plant. Complete package. Make an Offer

Gas Turbine CC Power Station GE LM2500 Gas Turbine


80 MW GE LM2500 Dual Fuel Gas Turbine Power Plant Complete plant with (2) Two 30 MW LM2500 + Gas Turbines, (2) Two Steam Turbines, HRSG (Heat Recovery Steam Generators), 11 KV, 50HZ, Plant installed in 2005, Dual Fuel: Natural Gas (NG) and Liquid Fuel, 3700 hrs. & 5000 hrs., (3) Transformers, condensers, electrical systems, control systems, cooling systems, compressor systems, starting system, lubricating system, fire fighting system and much more. Complete package, very well maintained.

Gas Turbine CC Power Station GE Frame 6B Gas Turbine


40 MW GE Frame 6B Gas Turbine Generators 40 MW GE Frame 6B Dual fuel turbine packages, Dual Fuel Turbines, Fuel: Natural Gas (NG) & Heavy Fuel Oil (HFO), 11.5 KV, 3000 rpm, 50 HZ., Three (3) Available, transformers, pumps, exhaust system, electrical system, electrical panels, cooling system, starting system and much more. Turbines have run on natural gas and are in good clean condition. Turbines can be purchased individually or as a complete package. The gas turbines are being offered below market value and are the best price of any GE 6B gas turbines on the market today.

Gas generators Jenbacher 620, J320 Power Plant


5 MW Jenbacher JMS 620 Cogeneration Plant Complete Cogeneration Plant with 3119 KW Jenbacher JMS 620 Gas Generator Set, Year 2008, 16,000 hrs, (2) 1064 KW Jenbacher 320 Gas Generator Sets, 1500 rpm, 50 HZ, Fuel; Natural Gas & LPG, Gas Boiler, Evaporator, Economiser, Ventilations system, Heat exchanger, Electrical Control room, Cooling System, Transformers, all electrical equipment. Maintained since installation with all service records available

Gas generators MWM TCG 2032 V16 Power Plant


40 MW MWM TCG V16 Natural Gas Generator Plant (8) Eight TCG 2032 V16 Natural Gas Generator Sets, 50 HZ, Complete combined cycle package with all auxiliaries, Commissioned in 2012, Well maintained with maintenance records on site. Can be inspected in operation, Excellent Condition. This Plant will not disappoint you. Contact us to inspect

DIESEL GENERATOR SET AGGRETECH, VOLVO V580B - 320 KW


Qty. 1 Second-hand diesel generator set Mfc.: Aggretech, Volvo, Endress & Hauser Built: 2007 Type: V580 B Eletrical power: 320 kW Thermical power: 160 – 280 kW Generator Type: AG 500-4-400 Power: 500 kVA Voltage: 230 / 400 V Amperage: 722 Amps. Motor Mfc.: Volvo Type: Panther TAD1641GE air cooled Power: 484 kW at 1500 RPM Flow meter Mfc.: Endress & Hauser Type: Promat Qty. 2 running platforms 4 m x 0.8 m Sound insulation cover Fuel filter system Pumps Control cabinets Flue gas analyser

Welding Machines ZDIS GLIWICE YUN 4000-2


Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled cutting machine for thermal cutting of YUN 4000-2 is designed for oxygen cutting curved sheets and low-carbon steels. Technical parameters: -overall dimensions: 15x3 m, it can be reduced because it is modular -two oxygen burners and the third burner with plasma routing -maximum cutting width: 4000 mm -gas combustible: acetylene -power consumption: ok. 1.5 kVA -compressed air: min. 0.4 MPa, max. 20 m3/h -water: min. 0.1 MPa, max. 0.12 m3/h Part of the cutter consists of the following main units: -roadway -trolley with longitudinal and transverse drive -gas installation -mikrokomputerowy control MOUSSE -control unit ZSP -bottom bracket oxygen: 2 PCs. -installation of the socket -dimensions of the teams drive longitudinal and transverse (width x height x depth): 5450 x 1675 x 2500 mm, weight: 1400 kg -overall dimensions of the roadway (length x height x): 14000 x 600 x 5000 mm, weight: 1800 kg -the machine burner GCE with valves and fuses przypalnikowymi and a set of nozzles to the cutting thickness from 3-150 mm: 2 Kit. -DTR (motor and technical documentation) Optional equipment cutting ZDIS GLIWICE YUN 4000-2: -team to the sprinkler water mist: 1 PCs. -team to bevel edge for 0-45 degrees, straight line cutting: 1 PCs. -ASTER to support work in developing technology programs: 1 PCs.

CHP Unit Pro2 MAN 2876 LE 302


CHP Unit in 40 feet container Electrical power: 171 kW Fuel type: Biogas / Landfield gas Generator: Leroy Somer LSAC 46.2 L9/4p Hours of operation june 2018: Approx. 29000 Available probably spring 2018

Gas generators ABB TURBO TPS 57


AVAILABLE 4 TURBO ABB NEVER SERVED YEAR 2012 MODEL price each 20 000€

Blister machines Uhlmann UPS5ET


Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

gas engine Jenbacher J620GSE01 - 3000 KW


parting out for spares good standard crankshaft and block

ESAU & HUEBER GmbH SEMI/-fill


Beer KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour The semi automatic party-KEG-filler with 4 filling heads and capacity beginning from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000. The KEG is placed manually onto the filler and lifted by two-hand operation. A sensor recognizes the arriving of the keg and starts automatically the filling process. The pre-air valve and the return-air will open. The keg gets purged with CO2 for approximately 5 seconds and the air opened simultaneously and the keg will be filled from bottom to top. A sensor probe – installed into the return-air channel – controls the filling process. A lamp indicates the finished filling process – the beer valve will be closed. The return-air valve stays open for a moment to relieve the filling pressure inside the keg to prevent any spilling when removing the keg from the filling head. Utilities, beer, cleaning agents, gas load and a return gas supplied via valve and piping systems controlled by Esau Hueber control system. The design is made of stainless steel frame with a work desk, on which are arranged lift cylinders and pneumatic switches. The frame is equipped with support devices to accommodate all the remaining components. Bottling of beverages produced in the automatic mode. All other processes are performed manually. Equipment is good condition and ready to delivery. Manufacturer: ESAU & HUEBER GmbH Manufacturing year: 2000 Type: SEMI/-fill Capacity: 100 – 200 keg/h Number of filling heads: 4 Serial number: 7003 Product pressure: 1,5 – 2,0 bar Product temperature: >4 – 5 0C Voltage: 230 V, 50 Hz Operating air: max. 7,0 bar Pressure CO2: max. 8,0 bar CIP / washing up to 120 0C / max. pressure 1,5 bar

Painting Line ITW GEMA AG


Paint Shop ITW GEMA AG produced in 2005 year in Switzerland. Line-specific data ITW GEMA AG: -conveyor bi-rotational -the size of the window: 6000 x 1600 x 800 mm -preparation of the surface: 3-zonal bath with a hairdryer -plastic cab-line powered by natural gas -line speed: 1-3,5 m/min. -The line is incomplete.

Gas generators TEDOM BIO GAZ TB170 G5V TW86


2 generators biogas in container powers kw 160 each engine year 2015 hours of service 14,000

INDIRECT EXTRUSION PRESS & BILLET FURNACE WILLIAMS ENG. & ED BUTTRE 1000 MT - 6 - 152 x 510 MM


Qty. 1 Second-hand extrusion press including billet furnace Mfc.: Ed Buttress – Williamson Eng., Rexroth Built: 1998 Stopped: 2012 Type: Indirect aluminium extrusion press Force: 1000 MT Billet dia.: 6” – 152 mm Length: up to 510 mm Profiles up to diameter of 95 mm Remote hydraulic power pack: 200 kVA Main hydraulic pump supplied by Rexroth supplied in 2012. Working pressure: 5000 psi Suitable for production, development pilot line, research facilities of different metal etc. Billet furnace gas heated 2 Zones every 2 minutes a billet ready for press Capacity: approx. 25 billets/hour Note: Electric is already removed – has to be replaced! Full service can be provided!

Gas generators Caterpillar 3520


2000 KW Caterpillar 3520 Natural Gas Generator Sets Two (2) 2055 KW Caterpillar G3520 Natural Gas Generator sets, Two (2) Caterpillar 3520 natural gas engines with Two (2) KATO Generators, 2671hp, 60 Hz, 13.8 KV, 1800 rpm, 60 HZ, 0.7PF. year 2009, Low hours, Mufflers, Batteries, Battery Chargers, Oil Heaters, Prelube System, Water Pumps, Woodward Governor, panels, ABB Medium Voltage Switch Gear and Allan Bradley Motor Control Center and much more. Lots of equipment included with this package. Fast set up to generate immediate power. Excellent Condition.

CHP Unit Jenbacher Jenbacher gas engine


Hello all!Brand new containerised Jenbacher currently in production will be available November 2018. Do get in touch!

Oven AEW 350degC


AEW Oven Electric controlled Gas Oven 230 volts 350degC Double door Internal dims: 2.5m x 2.8m x 2.8m Outer 3m x 3m x 3.6m high Fan assist

Cooperheat Industrial Gas Fired Oven


Make: Cooperheat Model: Large Industrial Gas Fired Oven Year: 1990 Condition: Used Machine type: Other Location of machine: UK Machine Details Cooperheat Large Industrial Gas Fired Oven Model: Box Oven Year of Manufacture: 1990 Internal Dims: 2830 x 3000 x 2500mm (W x D x H) External Dims: 4000 x 3200 x 2960mm (W x D x H) Max Temp: 200°C Weight: 3500kgs Temp Range: 15°C above ambient temperature to 250°C Stainless Steel Interior Uniformity: +- 1% of setpoint Powered Exhaust Fan Programmable temperature control, Eurotherm over temperature controller and Chessell temperature chart recorder

Granulating plants TECNOVA 120 mm. Forced Feeding


TECNOVA RECYCLINGEXTRUDER 120 mm Schraube 33 L/D Silo und Zwangsfütterung mit Schnecke d.c. Motor 220 PS, 306 to Schaltschrank zur Thermoregulierung 10 Heizflächen 1 Entgasungssystem Plattenzeit-Bildschirmwechsler Wasserkraftwerk sterben Gesicht Pelletizer gute Arbeitsbedingungen Jetzt muss getrennt überholt werden angeboten, wie es ist,

TRANSPARENT RECYCLED LDPE FILM GRADE MADE IN ITALY post-industrial scraps


TRANSPARENT RECYCLED LDPE FILM GRADE Material : LDPE Color :TRANSPARENT HONEY Origin: post-industrial scraps Features: gas free – no smell Average MFI 0,3 – 0,6 gr./10? (190°- 2,16 kg) Average bulk density at 23°C : 925 kg/m3 Screening : 110 m Use : film.+ I.M.+ extrusion Packing : 1100 kg. big bags Total quantity: 24 MT on a 40? fcl Availability : 2 loads per month Ongoing supplies

TRANSPARENT RECYCLED LDPE FILM GRADE MADE IN ITALY post-industrial scraps


TRANSPARENT RECYCLED LDPE FILM GRADE Material : LDPE Color : TRANSPARENT HONEY Origin: post-industrial scraps Features: gas free – no smell Average MFI 0,7-1,00 gr./10? (190°- 2,16 kg) Average bulk density at 23°C : 925 kg/m3 Screening : 110 m Use : film.+ I.M.+ extrusion Packing : 1100 kg. big bags Total quantity: 24 MT on a 40? fcl Availability : 2 loads per month Ongoing supplies

TRANSPARENT RECYCLED LDPE FILM GRADE MADE IN ITALY post-industrial scraps


TRANSPARENT RECYCLED LDPE FILM GRADE Material : LDPE Color : TRANSPARENT HONEY Origin: post-industrial scraps Features: gas free – no smell Average MFI 1,00 gr./10? (190°- 2,16 kg) Average bulk density at 23°C : 925 kg/m3 Screening : 110 m Use : film.+ I.M.+ extrusion Packing : 1100 kg. big bags Total quantity: 24 MT on a 40? fcl Availability : 2 loads per month Ongoing supplies

JAZZ RECYCLED LDPE FILM GRADE MADE IN ITALY post-industrial scraps


Material : LDPE Color : JAZZ Origin: post-industrial scraps Features: gas free – no smell Average MFI 0,7 gr./10? (190°- 2,16 kg) Average bulk density at 23°C : 925 kg/m3 Screening : 110 m Use : film.+ I.M.+ extrusion Packing : 1100 kg. big bags Total quantity: 24 MT on a 40? fcl Availability : 2 loads per month Ongoing supplies

BLACK RECYCLED LDPE FILM GRADE MADE IN ITALY post-industrial scraps


Material : LDPE Color : BLACK Origin: post-industrial scraps Features: gas free – no smell Average MFI 0,7-1,00 gr./10? (190°- 2,16 kg) Average bulk density at 23°C : 925 kg/m3 Screening : 110 m Use : film.+ I.M.+ extrusion Packing : 1100 kg. big bags Total quantity: 24 MT on a 40? fcl Availability : 2 loads per month Ongoing supplies

BILLET FURNACE ALUMINIUM TECALEX ALUMINIUM TECHNOL 8 - 203 MM - 4000 KG/H


Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

ATTREZZATURE RISTORAZIONE MENSA E PULIZIA


Kitchen equipment and primary school, nursery furniture and pharmacy For sale exclusively on next 3 July at 11:30 at our office in Bergamo For detailed catalog, info and appointments to view please contact us at 030 7751645 in business hours 9 – 13, 14 – 18:30 or visit our website. The goods are kept in Vigasio (VR), at various venues. Equipment for guest quarters, kitchens, Office forniture for Pharmacy And primary school – kitchen equipment and furniture -Professional oven make "Rational" -Professional pasta cooker brand "Fagor" -Professional 4 burner cooker -slicer brand "Fac" -kitchen with professional gas static brand "Lincar" -pots, pans, cutlery, cooking utensils and various (see details in the catalogue) -steel Tables Professional pasta cooker double-brand "Lincar" -machine-meat mincer brand of "Grim" -fridge with two professional cells -plates, bowls, glasses (see detail in the catalogue) -cafeteria tables, 21 units -chairs, unit 131 Nursery furniture and equipment -desks, 60 units -wooden chairs, 59 units -chairs, 86 units -trolleys for food -spoons, various cutlery Pharmacy furniture, computers and miscellaneous -wooden Shelves for display -table with drawers for incoming drug load -freezer cockpit branded "Ignis" -video surveillance system with monitor, recording drives and six cameras brand "Samsung" -automatic machine for blood pressure measurements -external condoms distributor machine -teaches pharmacy Machinery cleaning Sports Hall -clean floors with brand "Comac" -cleaning Carts, 2 units -various equipment

Wartsila 20V34SG


Dear Sir, Here are details of Wartsila 20V34SG 9000 kw Gas Gen Set. Make: Wartsila Type: 20V34SG KW: 9000 RPM:750 Year:2010 Kindly advise your interest.

GE Jenbacher JMS620GS


Dear Sir, Here are details of 5 MW Jenbacher 620 Gas Generator. 1)Engine Manufacturer: GE Jenbacher Model: JMS620 GS KW Output: 3119 KW RPM: 1500 rpm Hours since new: 16,000 hours Year: 2008 Alternator: AVK Voltage: 6300 V Current: 408 A Frequency: 50 HZ 2) Engine Manufacturer: GE Jenbacher Model: JGS320 GS KW Output: 1064 KW RPM: 1500 rpm Hours since new: 23,800 hours Year: 2006 Alternator: AVK Voltage: 400 V Current: 408 A Frequency: 50 HZ Kindly advise your interest.

Gas generators Wartsila W16V34SG


Dear Sir, Here are details of Wartsila W16V34SG Gas Gen set. Engine specifications as per name plate Make - Wartsila Type – W16V34SG Spec. no.- 17477 KW- 7200 r/min- 750 Rotating Direction – Clock wise Manufacturing -11/2010 Synchronous Generator specifications as per name plate Make – AVK Year – 2010 Type – DIG 167 e/8 Rated load --7968 KVA BR Voltage –6600 V Rated Current – 697 A PF-- 0.8 Rated output – 6375 KW Frequency – 50 Hz Kindly advise your interest.

JENBACHER 620


Greenhouse Jenbacher 620 with CHP and Codinox Model: JMS 620 Age: 2009 Hours: 14,000 Capacity: 3 MW Volts: 10,500 Scope of Supply: Genset, Control System, Gas Line, Oil Tank, Acoustic Canopy, Exhaust Gas Heat Exchanger and Codinox System (blocks need replacing). Price: €600,000 for the Complete plant. Buyer to dismantle and load.

CATERPILLAR 3516


Here are details of CAT used gas gensets. Model NO: G3516C RPM : 1500 Power : 1665KW Cylinder arrangement : 16V (60 Degree) Make : CAT SR4B - HV Voltage : 11KV Capacity in KVA : 2000KVA

CNC Bending Machines Gasparini PBS 135/4000


OVERVIEW: Brand: Gasparini Model: PBS 135/4000 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2003 Location: Spain Origin country: Italy GENERAL DATA: Measurements width: 4250 mm Measurements depth: 1700 mm Measurements height: 2750 mm Machine weight: 14000 kg MAIN DRIVE: Pressing force: 1350 kN Bending length: 4000 mm CONTROL UNIT: Brand: Delem Model: DA-65 MEDIA: Main electronic connection: 380 V / 50 Hz Power consumption: 15 kW

Gas engines MAN E 2876 LE 202


Power: 220 kW Rotation speed: 1500 1/min. Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Gas engines MAN E 0836 LE 202


Power: 110 kW Rotation speed: 1500 1/min Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Diesel engines MWM DEUTZ TBD620V12


2 COGENERATION ENGINES: 2 X MWM-DEUTZ V12 TBD620 YEAR OF MANUFACTURE: 1999 HOURS: approx. 9000 OUTPUT: 1.3Mw ALTERNATOR: LEROY SOMER OUTPUT: 1260 KW / kVA 1300 COMPLETE PLANT •Generator (alternator, engine engine and PLC) •Gas train •Water cooling system (heat exchanger + complete pump) •Oil Cooling System (heat exchanger + complete pump) •Control Panels generator (DIANE) •Electrical control panel accessories (pumps, etc) •Technical Documentation

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00
Get the latest machine offers by email: order newsletter