gas generator 250 used for sale

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

For sale is a workshop-overhauled and function-tested, free-standing VA diatomaceous earth dosing device. The device is immediately ready for use. Specifications: Manufacturer: Schenk Year of manufacture: unknown Type: DO-S-250 Boiler capacity: approx. 250 l (with lid almost 1/2 hinged with hinge) Hourly output for KG filtration: 200 hl for beer, wine and fruit juice Dimensions total: L max. = 1.20 m / W max = 0.80 m / H max. = 1.685 m Beer pipe: Input/outlet DN 50 KM/G - Dosing connection in the beer pipe DN 25 KM Connections in the boiler: 1 inlet at the top side DN 50 G with 90-degree bend (inside) downwards 1 remaining outlet DN 50 G with shaft closure and handle from above 1 connection DN 32 KM above 1 DN 50 KM connection at the bottom side with a 90 degree bend upwards - then reduced from DN 50 to DN 10 G Boiler dimensions: Diam. inside = 0.65 m ...

Key data: 490 mm, 1120 , 990

Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Hacker TH 250/650 with metal detector, sieve..

PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.

Main spindle control, RAC 2.3-250-380-A-00-W1, Indramat Bosch Rexroth, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The high quality part comes from a spare parts stock of a mechanical processing of a large automotive manufacturer. The main spindle control was repaired by Bosch Rexroth. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Nolting, Type: SUR 2500, Year: 1999, Heating power in kW: 2500, Fuel type: Späne, Heating medium water: yes, Year :1999

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

The scope of delivery includes: 01x Shelf connector, used for shelf spacing: approx. 250 mm Total length: approx. 330 mm Cross-section: U 30 x 52 mm Material color: blue Weight: 0,46 kg | Pcs.

Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...

RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description:  Web width: max. 10 inch – 254mm  1x die-cutting unit  1 x inking unit UV Flexo 1-colour with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included:  Manuals  Keys  etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________

Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55

Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz

Max diam 250 , max lenght 2000, 3 x heads , change gears

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Tehabo Model ERU 2500

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Material thickness: approx. 2 mm Drill hole Ø: 10 mm Weight: 0.270 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm ¡¡ QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed chee ...

Used steam boiler made by Roucka, capacity 2.5 tons of steam per hour and pressure 9.2 bar. New 1994. Oil burner, control cabinet, fittings.

Shuffle-mix 250 mixer / aerator 200-103 Stainless mixer, 250L, mobile frame, 3Ph

Electrode welding machine Zinser 380 V 32 A Welding current 20-250 A 7 m connection cable Dray Welding cable Ground cable

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: TCD 2013 L06 4 V Engine No.: in production Power: 250 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K 1 Gene. No.: in production Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 500 Dimensions of the power unit: Width approx. mm: 1.100 Height approx. mm ...