gas furnace used for sale

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

max. temperature: 1000 Grad size of opening: 170 x 90 mm depth of chamber: 280 mm total power requirement: 3 kW weight of the machine ca.: 80 kg dimensions: 0,7 x 0,55 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

TERMETAL T6MX2-8-750 induction furnace was built in 2004 in Poland. It is an extremely versatile machine designed for the heat treatment of metals. The machine is specially designed for the continuous, crosswise heating of S49 and S60 steel rails. It also enables the heating of metal charges of various shapes and the execution of other processes that require high power. Charges are heated by means of high-frequency current. The AC current flowing through the primary coil creates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, causing the charge to heat up. This solution makes the TERMETAL T6MX2-8-750 much more efficient and economical than other furnaces available on the market. The TERMETAL industrial furnace is distinguished by a number of high-quality components with high thermal and electrical resistance. ...

Cieffe FNCm 2.5/0.8/1500 Hardening furnace Chamber furnace 1120 °C Manafacture: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 volts Year: 2000 More items - new and used - can be found in our shop! International shipping costs on request!

-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed

Used roasting/baking oven from Food Design Applications – Ireland Model: MSOG/2-100/800 Burners: Lanemark International Heating power: two burners: 2x 170kW = 340kW It is possible to connect steam. It can also work as a cooler, dehumidifier Two independent zones Electric blow height adjustment Electric blowing force adjustment Electric belt speed control Direct wash possible Indirect heat distribution system (tubular heat exchanger) Lower waste tray Stainless Tape, Braided with Belt Tensioning System Complete stainless steel chimneys, including exhaust gas control fans Natural gas Dimensions: Chamber (tunnel) height (adjustable) max. 250mm Tape width 950mm Belt width – working space 920mm Length of the whole machine 10250mm Baking Length 8000mm Machine width 2030mm Height with motors 3250mm Acid-resistant design.

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

Electrically heated bogie hearth furnace for a maximum operating temperature of 1280°C. The heating system consists of five control zones. Heating is provided by the sides, rear wall, door and carriage. Heating wire made of APM wire mounted on support tubes. Connected load oven: 75 KW. Incl. 2 fresh air blowers, 2 pcs air heaters, housing cooling with 2 pcs medium-pressure fans, automatic ceiling flaps, insulated stainless steel hood, 2 pcs hearth trolley with SiC plate cover (steerable, on PVC castors, not track-bound) and original switchgear with Windows PC (hardware: Siemens SIMATIC Rack PC). Furnace chamber dimensions (WxDxH): 900 mm x 1,900 mm x 900 mm (= 1.53 m³); Dimensions usable space (WxDxH): 750 mm x 1,840 mm x 850 mm (= 1.173 m³). Weights: Approx. 3,800 kg (oven and attachments); Approx. 850 kg (switchgear).

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

Tube furnace Manufacturer: Nabertherm Type R170/750/12 These compact tube furnaces with integrated controls can be used universally for many processes. Equipped with a standard C 530 ceramic working tube and two fiber plugs, these tube furnaces offer unbeatable value for money. • Tmax 1200 °C • Single-zone design as standard • Double housing made of textured stainless steel sheets • Only fibrous materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used • Outer tube diameter 170 mm, heated length of 750 mm • Work tube made of C 530 ceramic with two fiber connectors as standard equipment • Tmax 1200 °C: Type N thermocouple • • Solid-state relays ensure low-noise operation • Defined application within the limitations of the user manual • NTLog Basic for Nabertherm controllers: recording of process data with USB  ...

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Qty. 1 Second-hand Aluminium Melting Furnace Mfc.: Sistem Teknik Type: SAMHF-6 Stationary Alu melting/holding furnace Built: 1/2015 Stopped in 4/2015 Recycling capacity: 5000 Ton/annum Charging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc. Natural gas 6 ton melting furnace Made in Europe CE standard of quality and pollution control Casting capacity of 20 ton of aluminium per day PLC automatic control unit including HMI system – Siemens Qty. 2 proportional control gas burners

SAFTherm STT-960-12A quenching furnace was built in 2024 in China by Henan Sante Furnance Technology Co., Ltd. The machine is designed to harden metal parts at a maximum temperature of 1200°C. Hardening is a heat treatment process for steel, the purpose of which is to significantly increase the strength, hardness and wear resistance of the material. During this process, the steel is heated to a specific temperature maintained for a defined time and then rapidly cooled. This causes changes in the material’s internal structure that translate into improved mechanical properties. This makes the hardening process widely used in the manufacture of tools, machine parts and structural elements used in many industries. The SAFTherm STT-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. Its large work chamber with dimensions of 800 x 1200 x 1000 mm enables the ...

SAFTherm STDR-960-12A tempering furnace was built in 2024 in China by Henan Sante Furnance Technology Co., Ltd. The machine is designed for tempering steel at a maximum temperature of 850°C. Tempering of steel is one of the heat treatment processes designed to reduce the internal stresses created by hardening and improve the mechanical properties of the material. The process involves heating the steel to a specific temperature below the eutectoid transformation temperature, maintaining this temperature for a defined period of time and then cooling it down in a controlled manner. This gives the steel greater fracture toughness and improved resilience. The SAFTherm STDR-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. Its large work chamber with dimensions of 800 x 1200 x 1000 mm enables the treatment of single workpieces as well as larger series. The  ...

Key data: 1400 C

Chamber furnace Nabertherm LH 60/14 with controller P300 Manufacturer Nabertherm. Made in Germany. Tmax 1,400°C. 12 kW. 400 V. Volume 64 l. Heating capacity 12.0 kW Mobile undercarriage. Dimensions: Inner dimensions oven (WxHxD): 400 x 400 x 400 mm External dimensions oven (WxHxD): 790 x 1370 x 1080 mm External dimensions frame (WxHxD): 1300 x 1160 x 825 mm Clear space in the frame (WxHxD): 1100 x 1065 x 825 mm Weight (oven): approx. 300 kg (plus base) Equipment & Features: Insulation: Multi-layer construction made of high-quality, durable Lightweight refractory bricks (LH model). Heating: 5-sided heating (from all sides and from the floor) for excellent temperature uniformity. The heating elements are protected on support tubes. Controller P300: Convenient digital program control for precise heating profiles and holding times. Accessories: Including robust, m ...

Key data: 1 C, 200 mm, 220 mm

Chamber furnace Nabertherm L5/11 with controller B170 Manufacturer Nabertherm. Made in Germany. Temperature max 1,100 °C. 2.4 kW. 230 V. Nabertherm muffle furnace with hinged door. Heating from two sides by ceramic heating plates Ceramic heating plates with integrated heating wire, Splash and exhaust gas protected, easy to replace. Insulation made of unclassified fiber material. Housing made of stainless steel structural sheets. Double-walled housing for low Outside temperatures and high stability. Adjustable supply air opening in the door. Exhaust air opening in the rear wall of the furnace. Low-noise operation of the heater with solid state relays. Internal dimensions (WxHxD): 200 x 130 x 220 mm. External dimensions (WxHxD): 390 x 385 x 460 mm. Volume 5 l. Internal NR 645-2 Areas of application & details: Laboratory Furnace, Muffle Furnace, High Temperature Furn ...

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme erfolgt bei Dünnband auf den Spulen und dickeren Bändern in Prismen ode ...

Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenhe ...

Key data: 250 °C, 700 mm, 700 mm

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Key data: 1150 °C, 260 mm, 500 mm

Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine Type: Electric Chamber Furnace/Laboratory Furnace/Heat Treatment Furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideal for heat treatment processes, annealing, material testing, laboratory applications, and research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratory, workshop, industry and research Solid German quality production Max. temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Areas of application: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Interior chamber dimensions: B260 H180 T500

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - .ucymachines/ Contact us at - sales@ucymachines

degree: 0 working heigth: mm length: mm width: mm depth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Last maintenance in 2024 Auction-ID: A1-49186-58

Last maintenance in 2024 Auction-ID: A1-49183-57

Auction-ID: A1-49183-418

Walk-in industrial heating, drying and tempering furnace for thermal treatment and forming. Tempering and forming of Makrolon/PC, PET-G, GS and XT as well as paint drying. Depending on the application, different temperature, running time and energy parameters can be programmed by PLC. Technical data Manufacturer: Egger Apparatebau Plant type: Industrial drying/tempering oven / Convection oven Version: walkable Manufacturer of recirculating air/fan unit: HERING AG, Gunzenhausen Type of recirculating air unit: NERB 200 F4/S Year of manufacture of recirculation unit: 2007 Manufacturer no.: 30-700126 Air volume flow: 7,200 m³/h Total pressure: 400 Pa Fan speed: 2,840 rpm Max. temperature circulating air unit: 220 °C Shaft power: 0.75kw Electrical connection heating: 400 V Heating capacity: 70 kW Control/auxiliary voltage: 230 V Power Control/Auxiliary Cur ...

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - .ucymachines/ Contact us at - sales@ucymachines

General Description Industrial vacuum heat-treatment furnace manufactured by MILCO , model VP 1350 . Horizontal front-loading furnace designed for controlled thermal processing of metal components under vacuum or process-gas atmosphere. The installation comprises the furnace chamber, vacuum pumping equipment, process piping and separate electrical control system. Technical Details Manufacturer: MILCO Model: VP 1350 Machine type: Vacuum heat-treatment furnace Year: 2016 Power supply: 380 V, 50 Hz Installed power: 120 kW Horizontal cylindrical vacuum chamber Large hinged front loading door with multiple locking clamps Internal heating / hot-zone assembly Internal material support / transport system Vacuum pumping system Leybold-Heraeus vacuum equipment Cooling and process-gas piping Nitrogen filling system Pressure instrumentation Separate electrical control cabinet T ...

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

degree: 650 working heigth: 250 mm length: 250 mm width: 250 mm depth: 450 mm total power requirement: 8 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 150-500 Grad basket dimensions: 300x210x460 mm total power requirement: 2.6 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 0.80x0.60x0.95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1150 Grad size of opening: 250 x 160 mm depth of chamber: 400 mm weight of the machine ca.: 480 t dimensions of the machine ca.: 1.1 x 1.1 x 1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 320 mm z-travel: 420 mm b-axis: -45 / +180 ° c-axis: 360 ° 0 Control: SIEMENS 840D SL spindle taper: A-50 spindle turning speed - stepless: 12000 U/min tools in tool magazin: 64 total power requirement: 36 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3 x 5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025.

max. temperature: 800 Grad size of opening: Durchmesser 430 mm depth of chamber: 630 mm dimensions of the machine ca.: 2 x 1 x 1.6 m weight of the machine ca.: 530 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.