128,204 used machines on RESALE, but how to find them? Machine Search
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...
Key data: 812 KW, 400 V
Complete 812kW containerised CHP Himonsia / Siemens HGS-810 T5 LPG generating set Make and model: Himonsia / Siemens HGS-810 T5 LPG Scope of supply: 40ft Container (67dBA1m), Engine (Siemens), Alternator (Stamford), Control Panel (Comap Controller), Remote Radiator and Heat Exchanger. The Engine is currently being rebuilt with 4 x heads already replaced and the following spares available with the unit: 7-cylinder head gasket kits 1-cylinder head 1- exhaust manifold section 1-water temperature sensor Maximum service cost estimated at £30,000. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual ...
Forty two (42) Quality Used Cummins/Aggreko NCH20-QSK60G22, Dual Frequency 1875 kVA, 480v. 60 Hz. or 1875 kVA, 400v. 50 Hz. Natural gas generator sets. These 1875 kVA units are set for continuous an parallel to gird IPP applications. These units have less than 5000 hours of use since new. The generator is a gas engine driven alternator with control electronics, mounted on a bedplate and housed within a custom-built 20ft stackable container. The standard package is composed of the following: Alternator and engine assembly, Pressurized oil system, Automated control system, Instrumentation, Safety provisions, Engine cooler pack, Silencer, Gas lines including external Low Pressure Gas Train & internal Solenoid Valve The engine and alternator are integrally mounted. This assembly is isolated from the bedplate base by rubber isolation mounts. A 20ft containerised Gas Cooling Module (G ...
SUMERA MOTOR SMG-100LG-S gas generator was built in 2018 in Poland by SUMERA MOTOR Sp. j. The machine, which is powered by natural gas, ensures uninterrupted operation of machinery and industrial systems in the event of power cuts or in conditions where electricity cannot be supplied. All components of the machine, including the 100 kVA motor, are located inside a soundproof enclosure that significantly reduces noise levels. The SMG 100LG-S generator weighs 1690 kg. Technical specifications of the SUMERA MOTOR SMG-100LG-S gas generator - fuel type: natural gas - rated power: 100 kVA (80 kW) - rated current: 144.6 A - rated voltage: 230/400 V - rated frequency: 50 Hz - rated power factor: 0.8 cosφ - performance level: G3 - degree of protection: IP 44 - maximum operating temperature: 40°C - weight of the SUMERA MOTOR machine: 1690 kg
core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4
Key data: 800 KW, 1000 kVA, 400 V
NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine, Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...
Key data: 2800 KW
ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...
FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Key data: 1600 KW, 400 V
CHP Power Plant 800 kWe with 2 × MWM TCG 2016V08 Gas Gensets Combined Heat and Power (CHP) plant with 800 kWe / 400 V / 50 Hz output, designed to operate on natural gas or biogas. The plant was originally delivered by MWM in 2011 and remained in operation until 2021. It has low operating hours and is in good technical condition. Thermal energy is recovered as hot water at 90°C, currently utilized for district heating. Due to limited biogas availability, the plant typically ran at 30–40% load and not in continuous 24/7 operation. The facility includes a complete gas treatment and mixing system to handle landfill gas with a methane content of 40–55% CH₄. The power generators are housed in two soundproof containers, while the TEAM Evo MWM power plant control system, electrical switchgear, and control cabinets are installed in a separate control room. The heat recovery syste ...
1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...
SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...
Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1030 , 400
Available full gas natural power plant of Caterpillar 3516 (1030kW) from 2004 with 70606 hours of working. All the maintenances has been done by official service following the official schedule. The engine stopped working perfectly at full load. Full boroscope inspection is available. Scope of Supply: -Genset -Gas train -Control Panel -Switch braker (alternator + transformer) -Exchanger -Silincer -Refrigeration System (HT Aerofan and LT refrigeration tower) -Oil system The assets are already dismounted on our wharehouse ready to be load or to be inspected. For more information please contact us!
Key data: 2500 KW, 3125 kVA, 13800 V
Five (5) Quality Used Mobile Caterpillar G3520, 2.5 MW, (Each) 13.8 kV, 60 Hz. Enclosed with Trailer Chassis. · Caterpillar G3520, 2.5 MW, 3125 kVA Continuous, 13,800v. 60 Hz. Natural Gas Generator sets. · Charging Alternator, 24v. 50 amps. · NLA-EPA Certification 1 Gram/BHP-Hr · Generator End Arrangement 3042 Permanent Magnet, 105°C Temperature rise over 40°C Ambient temperature. · Jacket Water Heater 480v. · NLA Electric Prelube Pump · EMPC 4.4 Control Panel · 53” Sound Attenuation Enclosure · Quadruple Axel Trailer Chassis · Cooling System · Exhaust System · Air Filters · Duplex Oil Filters · Fire Suppression Tanks · 24v. Battery Charger · Mobile Natural Gas Generator Sets · Plug & Play · MANUFACTURING YEAR 2023 & 2024 Units are ready for shipment.
Viessmann Vitoplex 200 oil/gas boiler 900 kW with Weishaupt gas burner Manufacturer: Viessmann Model: Vitoplex 200 Type: Oil/Gas Boiler Nominal heat output for oil and gas: 900 kW Rated rated heat output: 978 kW Boiler capacity: 1325 l Permissible operating pressure: 6 bar Permissible operating temperature: 110 °C Standards: EN 14394 / TRD 702 / TS EN 303-1 / TS EN 303-3 Location: Paderborn Burners: Manufacturer: Max Weishaupt GmbH Burner type: WM-G10/4-A monarch Design: ZM Serial Number: 40457248 Year of manufacture: 2018 Country of destination: DE Category: II2R3R Gas Type: N Power range: min. 110 kW / max. 1250 kW Connected pressure: min. 100 mbar / max. 2500 mbar NOx class: 2 Control voltage: 230V 1~50Hz Mains voltage: 400 V 3~ N PE 50 Hz Electrical power: 2.16 kW Degree of protection: IP54
weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
Key data: 600 KW, 750 kVA, 230 V
2 x 300 kW Cummins Natural Gas Gensets in Soundproof Container, 600 kW Total, Steam Heat Recovery For sale: containerized natural gas power generation package consisting of 2 x 300 kW Cummins gas gensets installed in one soundproof container, including synchronization system for parallel operation and steam-type exhaust gas heat recovery system. Total electrical output in parallel operation: 600 kW. Offered manufacturer package is based on Cummins 15NG-330 gas engines, Leroy-Somer alternators, Woodward ignition/speed control, and DEIF AGC150 controller. Main technical data Quantity: 2 units Rated power: 300 kW each Total power in parallel: 600 kW Fuel: Natural gas Engine: Cummins 15NG-330 Engine rated power: 330 kW Cylinders: 6 Displacement: 14.5 L Rated speed: 1500 rpm Alternator: Leroy-Somer TAL-A46-H Voltage: 230/400 V Frequency: 50 Hz Powe ...
AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished
Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished
TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Key data: 526 KW, 910 kVA, 400 V
Jenbacher JMS 312 GS-B.LC - Container Design Number: F866 Year of construction: 2009 Country: Switzerland Site Name: Aarberg Module number: 803588 Engine number: 6128071 Serial number: 323762 Engine type: 312 Engine version: C225 Gas type 1: Biogas Control System: Dia.ne XT Power Output: 544 kW Electrical Output: 526 kW Thermal output: 505 kW Alternator: NEWAGE Type: HCI 634 H2 Type Rating: 910kVA Voltage 400V Frequency: 50Hz Turbocharger: PBST Type: TCR12-42516 Actual OH: 126,000 Starts: 5543 Service: Equipment was serviced by IWK (authorized Service Partner of INNIO for Switzerland). At 60k OH the Longblock was exchanged, at 105k OH the Minor Overhaul (40k) was done. Till next Major Overhaul the engine has approx. 15k OH left.
For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg
Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece
Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece
Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Transport trolley: galvanized version -Tires: pneumatic -Quantity: 1 piece available -External dimensions: 760/520/H1320 mm -Own weight: 19 kg
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: solid rubber -Number: 1 piece car available -Price: per piece -External dimensions: 730/520/H1325 mm -Own weight: 26 kg
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg
Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed
Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece
maximum number of results exceeded
please refine your search
130 € 
