gas engine 150 used for sale

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

Industrial robots Kuka KR150 Series2000, And KR150L130, KR150L110, KR210 Built 2001/2002 Range 2700mm, 2900mm, 3100mm, 2700mm Payload 150kg, 130kg, 110kg, 210kg Weight 1245kg Connection line 7m or 15m Control KR C2 Weight 185kg Software stand V4.1.5 Hand programming kCP2 ..

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

Cast T-slot plate 1500 x 950 mm

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Robot Kuka KR150 series in 2000 construction year 2006 reach 2700 mms weight 1245 kg load 150 kg control KRC2 ed05 weight 185 kg software state V5.3.6 Kuka KCP2 ed05 connecting pipelines 15 m .

Smicon AFT 2/1500 Fumigation / Fumigation plant During fumigation, a room is flooded with a toxic gas to fight pests/bacteria. As these are toxic gases, special safety measures are required. Fumigation is common in the storage of organic materials (e.g. grain storage, in warehouses of ports, silos, mills), and in churches to combat woodworm. It is a device that is used for disinfecting rooms. Formaldehyde is boiled on the left hotplate and placed together with condensed water (right stove top) in an air flow in a room, killing all bacteria there. Former list price EUR 10,900 net More articles - new and used - can be found in our shop! International shipping costs on request!

Robot Kuka KR150 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 EUR Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 90 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

used chamber filter press / filter press Passavant 1500 x 1500 record size: 1500 x 1,500 mms chamber number: 127 pieces cake thickness: 30 mms filter pressure: 16 cash Schliessdruck: 380 br filter records: GGG optionally PP filter cloth cleaning arrangement: optionally

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

AGFA AccuSet 1500 plus (Latest Version). System is completly cleaned and checked. Resolution: 1200, 1800, 2400 and 3000 dpi resolution - including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

1 x Meccaniche Moderne 1500mm x 560mm dia two roll mill, Type: DUPLOCOM, Year 1984 but refurbished in 2001 to CE regulations. Peripherally drilled rolls, motorised nip adjustment (2.2kW to each roll), with 37kW, 1450rpm motor fitted to each roll, Friction ratio 1:1.24, Back roll speed 16.1rpm, front roll speed 12.9rpm, 3ph, 380V, 50Hz.

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

Junction box for 10-30kV power cable. Explosion and water proof. Make: Gothe & Co Model: 73110-22-150-28-04 Year: 2009 - NEW, never used. Capacity: 10kV 340Ampere 150mm2 IP67 Comes complete, unused, with all couplings etc. Including testing sheet. New factory price approx. Euro 2250,- each. Ask us for competitive price! Description casing and cover of steel sheet 3mm, the casing is provided with 3 ceramic terminal sockets to connect cables and conductors up to 150mm², internal and external earthings, sidebox is provided for connecting supervising and control conductors up to 6mm², option optical fibres

Robot KUKA KR125/150/200 manufacture date 1996/1998 reach 2400mm, weight: 975kg / 1025kg payload 125, 150 and 200kg controller type VKRC1 (VW/Audi version) weight 136kg software version 3.3.3 SP06 RAM amount SD RAM 64MB KCP/VGA/1.0 Grafic Board Language Windows95 Teachpendant Kuka VKCP1 Cable length 7m larger quantities available, preferred selling in large quantities.

Schleifscheibenaufnehme for Kellenberger / Santiago and Miwatec, as well as another manufacturer of cylindrical grinding machines in stock. Ask us. We carry an extensive stock of accessories:

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Eurolux beer tanks / fermentation tanks made of V2A with cone bottom, Test pressure: 1.5 bar, operating pressure: 0.99 bar with cooling jacket - capacity: 1500 litres New Material: V2A (AISI 304) 1.4301 Topsoil: with manhole with 6 screws with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 valve Cylinder tank: Cooling jacket 1000 mm wide with connection 1" AG input and 1 1/4" AG output Underbody: can be underrun with lifting scales and forklifts with residual outlet with forward-drawn outlet pipe, tank flush threaded nozzle DN 50, according to DIN 11851 with cone floor 120 Dimensions and weight: DxH: 1150 x 2400 mm Zyl. Height: 1500 mm Weight: 165 kg On request with: (extra charge - price on request): Fermentation sprout connection DN 50 Tasting tap DN 15 Fermentation s ...

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Clamping tongs recording: MK 5 / B-20 with forcing nut

Clamping tongs recording with forcing nut. Clamping pliers holder for cylindrical grinding machines. suitable for all grinders with a workpiece spindle mount Mt 5 MK 5 / B32

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

adjustable, vibrating feeder. Lxw = 1500x800mm Capaciteit 100 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220, MVE50, M60/130, MV 100/50 And new thyristor control.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

Tip height: 300 mm centre distance: 1500 mm gr. Turning diameter over bed: 625 mm spindle bore: 105 mm spindle retainer: Gr. 8 mm taper of tailstock Quill: 5 MK spindle speed: 6.6-2000 RPM elect. Supply: 400 V, 15 kW space: 4400 x 2050 x 1820 mm weight: 5200 kg

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...