gabler used for sale

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, 1 Marbach 8-cavity Ø95 PP cup tool year 2013 with Stacker Parts, Both Molds very sparingly used and in v. good condition, Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm

General SKU391U1099 LocationBarneveld MakeWLS Gabler TypeR-250 No.12850 Year of construction2001 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter100 mm Specified Features - Noduliser MaterialStainless steel 1.4552, Stainless steel 1.4404 Nodulisercheck Disc diameter250 mm Disc depth150 mm With outlet20 x 60 mm With covercheck Motor0,37 kW, 180Volt, 3000rpm With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight250 kg CEcheck Floorspace0,4 x 0,8 m Total height1,4 mNodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

General SKU218U113 LocationBarneveld MakeWLS Gabler Spheronizer Main Features MaterialStainless steel Motor3 KW Specified Features - Noduliser MaterialStainless steel Nodulisercheck Disc diameter600 mm With outletcheck With covercheck Motor3.0 kW, 230/400, 1400 rpm With variable speed drive(frequency control) With spraying nozzlecheck Information Mounted on framecheck With switchcheck With switchgearcheck (as is) Floorspace1,4x0,8 m Total height1,9 m Weight650 kg Extra SpecificationsIncluding: 1x Single Temperiertechnik heating units STW 150/1-9-20-K1S: 9 kW: 400 Volt NodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

(LIDS PRODUCTION) Machine consists of: -1x Roll-off block -Thermoformer Gabler Swing -Stacking

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) LocationBarneveld TypeDE 100/100 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck Information No.12482 Year of construction1992 With switchgear( as is ) Floorspace2,5x1,3 M Total height1,7 M Weight2150 Kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...