ga 355 used for sale

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Switching power supply, control, modem, power supply -Type: SNT 25 -Dimensions: 97/100/H36 mm -Weight: 0.35 kg

LHS Lagertechnik. NEW AND USED SHELVING SYSTEMS OF ALL KINDS. On 20,000m² - Pallet racks - Multi-storey stages - Shelving racks - Cantilever racks - Tire racks - Packing tables - and much more Various manufacturers in different sizes and lengths immediately available from stock Kaarst Manufacturer examples: Jungheinrich, Bito, Meta, Thyssen, Stow, SLP, Dexion, Galler, Schäfer, ! Currently over 10,000 pallet spaces IMMEDIATELY available We will be happy to make you an individual offer tailored to your needs (lengths / heights / loads). Demand and system determination of existing systems is also possible. The indicated price serves as a guideline for used goods and refers to gross per parking space incl. 19% VAT. Purchase / assembly and disassembly / rack inspections can also be offered. ! Do not hesitate to contact us !

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg

– High-precision dosing, measuring and control technology – Needs-based, field-tested equipment options – High reliability – Stable dampening solution parameters Very little use Absolutely as good as new

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Garvens BF8 S2 Belt checkweigher with poor discharge and collection container, Weighing range up to 250 g, e=0.1 g, belt width approx. 150 mm, Center distance infeed conveyor approx. 305 mm, Axle distance run-out conveyor approx. 400 mm, axle distance weighing cell approx. 200 mm, Conveyor belt speed 10 - 70m/min, from left to right, Mains voltage 230V, mains frequency 50 Hz, Dimensions 900 x 900 x 1600mm (LxWxH).

Programmable digital control Or 600x400mmm baking trays Perfect for in-house bakeries With proofer chamber Optional integrated deck-oven Model: Gala 5 Capacity: 40 x 60 cm x 5 External dimensions: 85 x 140 x 178 cm Power: 9.5 kW, 3NAC and 400 V Proofer: 85 x 140 x 90 cm, 40 x 60 cm x 12 - 1,75 kW and 230V Weight: 235 kg

Programmable digital control Or 600x400mmm baking trays Perfect for in-house bakeries With proofer chamber Optional integrated deck-oven Model: Gala 5+KP6 Capacity: 40 x 60 cm x 5 + Ø 30 cm (6) Internal dimensions: 62 x 92 x 15 cm External dimensions: 85 x 140 x 216 cm Power: 9.5 kW + 6 kW, 3NAC and 400 V Proofer: 85 x 140 x 69 cm, 40 x 60 cm x 5 - 1,75 kW and 230V Weight: 328 kg

Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gast, rotary vane vacuum pump type 1550-V2A -Vacuum: measured -0.7 bar -Overall dimensions: 600/250/H385 mm -Weight: 30 kg

Perforation tool W. Kroll Gartenberg 68-1 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.

1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33 Year 1963 - Serial-No. 0418 1 Clamp hotmelt binder Block back roughing with suction Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Bulk material system for mixing loose flours, powder, ganulate, spices and weighing into smaller batches Manufacturer Daxner GmbH Year of construction 2008 / plant in top condition / in stainless steel The system consists of the following components: 2x Nozzle Filter DFK-14/25/150 2x separation container Dm 1990 mm with vibration floor drain to rotary valve 2x rotary valve type Westinghouse AL 300 3C 2x eddy current screening machine type WM20 with magnetic box for metal separation and 2 sets of screen baskets 4x Horizontal Counterflow Mixer HGM-2000 2x Mixer inlet with folding box 2x Tube screw conveyor RSHN-250 2 x Tubular Auger RSHN-300 2 x Stafsjö Gate Valve (knife gate valve) 4x Transport Dosing Screw, Company Schenck Process GmbH, Type GRMD 42.089.089.0380.44.421.1119 If you want more information, please send us an email to: infobarsso and we will send you all  ...

Perforier- und Nutmaschine - Perforiertion - Creasing Machine W. Kroll Gartenberg K70 Serial-No. 61549 Working width max. 700mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzniederdruckpresse / Joint Nipping Press Gantenbein ROLONG RE SN. 1060 Serial-No. 1060 hydraulische Press / hydraulic press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80 Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 -Mat.No.: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 85 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor -Manufacturer: Ell, suction motor from scrubber dryer Gansow 70 BF 70 -Type: 500W -Voltage: 24 V -Quantity: 1 available -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg

Perforationswerkzeug - Perforation tool W. Kroll Gartenberg 385 Serial-No. 385 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Scrubber-dryer, floor cleaning machine, mop, control unit -Manufacturer: Gansow, control unit uP mos control from scrubber-dryer 70 BF 70 -Type: CHOP.MX B 24/35-70A -Voltage: 24 V -Number: 2x controllers available -Price: per piece -Dimensions: 160/125/H30 mm -Weight: 0.4 kg

Industrial robots, robots, counterbalancing -Manufacturer: KUKA, counterweight from robot KR125/3 -Type: GA2-D2 -Location hole: Ø 54 mm, distance 620 mm -Technical data: see photos -Dimension: 760/220/H290 mm -Weight: 41 kg

Key data: 2400 KG

Technical data of the pallet rack crossbar: Shelving system: Galler Type: Omega The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: grey IPG profile: 145 x 65 mm Agraffe: 5 HK (hooks) Clear width: 4,295 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h -Drive: 3 kW Overall dimensions: 710/400/H290 mm -Weight: 92 kg

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

We currently offer: CHP CAT Gas V16 Type: G3516 SITA Power: 1278 KVA/ 1033 KW Year of construction 1998 Hz 50 Hours: 0 After the overhaul in 2014, the generator set no longer ran Accessories: control cabinet, radiator, exhaust, complete heat exchanger Complete CHP plant Documents are included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg

Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Manufacturer: Garant, faceplate chuck size Ø 350 mm -Adapter: Short cone 6 -Bolt circle: Ø 133 mm / M12 -Through hole: Ø 80 mm -Groove width: 18 mm -Dimensions: Ø350 x 135 mm -Weight: 42 kg

pressure: 70 t throat: 325 mm stroke: 800 mm die cushion capacity: 35 t drawing stroke: 280 mm ejector stroke: 240 mm rapid traverse - down: 650 mm/sec working feed: 58-199 mm/sec dayligth: 1050 mm table surface area: 900x580 mm ram surface: 460x460 mm total power requirement: 45 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: BxTxH 1000x2200x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: gas-cooled -Length: 4.0 m -Weight: 2.0 kg

MIG/MAG hose package, MIG/MAG welding torch -Handover: in current condition as viewed -Burner: Burner neck missing, see photo -MIG/MAG hose package: Gas cooled -Length: 3.0 m -Weight: 2.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: gas-cooled -Length: 4.7 m -Transport dimensions: 500/470/H70 mm -Weight: 3,9 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas cooled -Length: 3.0 m -Transport dimensions: 460/360/H50 mm -Weight: 2.5 kg