ga 355 used for sale

Key data: 2000 KW, 2500 kVA, 400 V

Natural-Gas Caterpillar 3520-C 2000kw 2500kva 400 volt 50hz Natural Gas 26.122 original hours scope: Genset, control panel, Gasline, filterbox, Located in our warehouse in: General Power Holland B.V Kranenpool 10 6443VA Brunssum Netherlands info@generalpowerholland.nl Phone: +31681163153

Key data: 1064 KW, 10500 V

Model:Jenbacher J320 Year: 2020 Fuel: Natural gas Running time: 0 Condition: Brand new, just installed and never used Quantity: 3 units Location: Asia Accessories: Includes control cabinet, cooling system, muffler Price is USD310,000 per unit

Key data: 360 KW, 415 V

4 x Caterpillar G3412 low-hour Natural Gas Generator Sets available: 1 x 300 hrs 1 x 315 hrs 1x 2138 hrs 1 x 13,187 hrs Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Key data: 200 KW, 250 kVA, 400 V

Gas-fired syngas power plant. New, custom-made units from 100 to 500 kW. 1) Generates syngas from wood and agricultural waste. 2) Uses fine gas purification. 3) Uses biogas generators. 4) Fully autonomous. 5) Fuel consumption: 1.2-1.6 kg/kWh. 6) Low internal energy consumption. 7) High process control. 8) CE certified. If you have wood waste, husks, or peelings, you can generate electricity. For more information, contact us via WhatsApp at +38 050 323 99 22 or smartnrggroup@gmail.com.

Key data: 2000 KW, 2850 kVA, 400 V

MWM TCG 2020 V20 Containerized! 2000 kw 2850 kva 400volt 50hz 1500 rpm hours: 19.602 running hours. Engine Block manufacture year: 2018 Located in our yard: Kranenpool 10 6443VA Brunssum Netherlands General Power Holland BV Kranenpool 10 6443VA Brunssum Netherlands +31681163153

A single-girder gantry crane newly built and converted in 2014 by Teichmann is available. Load capacity: 5000kg, track center distance: 6000mm, lifting height: 6000mm, crane travel length: 3000mm, trolley: monorail underhung trolley, hoisting speed: 5m/min, trolley travel speed: 20m/min, crane travel speed: 20m/min. Documentation available. An on-site inspection is possible.

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

Horizon AC8000S year: 1990 (estimated) Minimum size: 148 x 148 mm Maximum size: 318 x 470 mm stock: 23 - 209 grams 8 bins vacuum feeders with pump speed: 1.600 - 2.400 sets per hour delivery table jam, misfeed, double sheet detectors preset counter

Horizon AC8000S Horizon SPF10 Horizon FC10 Horizon AC8000S year: 1990 (estimated) Minimum size: 148 x 148 mm Maximum size: 318 x 470 mm stock: 23 - 209 grams 8 bins vacuum feeders with pump speed: 1.600 - 2.400 sets per hour delivery table jam, misfeed, double sheet detectors preset counter Horizon SPF10 Horizon FC10 Minimum size: 148 x 148 mm Maximum size: 330:x 305 mm

MTU 12V4000L64FNER12 Natural Gas Containerised Generator Set. Make and model: MTU 12V4000L64FNER12 Capacity: 1,500 kW Voltage: 11,000 Frequency: 50 Hz Scope of supply: Engine, Alternator, Base frame, MIP & MCS Gas Genset, Control System, Gas Line, Radiator, Exhaust System, Container. This is for electricity only and is available for immediate delivery. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Kuntschar & Schlüter GTK 250 BO1 complete biogas cogeneration unit, commissioned in 2018, with a total of 65,000 operating hours. Equipped with a MAN E 2848 LE engine and a Marelli Motori MJB 315 MB (450 kVA) alternator, this set is designed for the energy recovery of biogas. Electrical power of 100 kW and thermal power of 149 kW, ideal for operation in biogas plants or industrial sites. Machine serviced, available quickly. Site visit possible. Technical file and photos available on request.

Kuntschar & Schlüter GTK 250 BO1 complete biogas cogeneration unit, commissioned in 2018, with a total of 65,000 operating hours. Equipped with a MAN E 2848 LE engine and a Marelli Motori MJB 315 MB (450 kVA) alternator, this set is designed for the energy recovery of biogas. Electrical power of 100 kW and thermal power of 149 kW, ideal for operation in biogas plants or industrial sites. Machine serviced, available quickly. Site visit possible. Technical file and photos available on request.

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Siemens, gas solenoid valve unused OVP -Type: VGS10.104E2 -Voltage: 230 V 50 Hz -Connection: 3/8 -Pmax.: 1000 mbar -Number: 20x valve available -Price: per piece -Dimension box: 110/70/H40 mm -Weight: 0.6 kg/piece

Inert gas welding machine, arc welding system, MIG/MAG welding system -max. welding power: 320 A -4-roller drive -Water cooled -Wire feed: separate, mobile -Accessories: hose package, ground cable, gas fitting -also suitable for robots -Quantity: 1x piece available -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

High-frequency ignition system, heating, gas and oil burners -Type: Dungs Gas Multibloc Control and Safety Combination MBC-300-VEF -Voltage: 230 V -Frequency: 50-60 Hz -Power: 120/16 W -Number: 10 valves available -Price: per piece -Dimensions: 235/135/H115 mm -Weight: 4 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN 25 PN 6 -Quantity: 8x valve available -Price per piece -Dimension: 125/99/H233 mm / 125/110/H230 -Weight: 3.9 kg/St.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

Spiral wound gasket, labyrinth housing gasket, flange gasket, high-pressure gasket -Manufacturer: Frenzelit, Novatec Premium flat gasket -Outer diameter: 126 mm -Inner diameter: 77 mm -Thickness: 2 mm -Quantity: 51x seals available -Price: per piece -Minimum order quantity: 15 pieces -Weight: 0.03 kg/pc.

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve -Manufacturer: Sisto, gate valve diaphragm valve Ovp -Connection: DN40 PN10 -Number: 5x valve available -Price: per piece -Cardboard dimensions: 250/180/H290 mm -Weight: 7.5 kg/pc.

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, double three-way shut-off valve -Manufacturer: Wehlan, Double three-way shut-off valve -Type: 33 R 010 A 02 Order No.: 13992 -Connection: DN32 PN16 -Hole spacing: 350 mm -Number: 12x valves available -Price: per piece -Overall dimensions: 490/140/H370 mm -Weight: 14.3 kg/pc.

Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge, pressure gauge with push-button tap -Manufacturer: Eclipse, pressure gauge with push button tap -Type: 0 to 160 mbar -Push-button tap: VE3-PN-DVGW -Screw connection: see photos -Dimension: 100/50/H210 mm -Weight: 0.9 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: GSL (German Standard Lift), Gas spring, Gas pressure spring, 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/Fee: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/piece

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 160 -Diameter: 160 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 5x gate valve available -Price per piece -Dimensions: 530/220/H150 mm -Weight: 4.5 kg/pc.

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy-saving gate valve -Manufacturer: Schuko, Pneumatic gate valve type 120 -Diameter: 120 mm -Valve actuator: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Quantity: 1x shut-off valve available -Dimensions: 450/230/H155 mm -Weight: 3.7 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 -Diameter: 180 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 140 -Diameter: 140 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 3x gate valve available -Price per piece -Dimensions: 520/260/H160 mm -Weight: 4,4 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 200 -Diameter: 200 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 3x gate valve available -Price per piece -Dimensions: 610/260/H155mm -Weight: 6,1 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 300 -Diameter: 300 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 1x gate valve available -Price per piece -Dimensions: 850/360/H200 mm -Weight: 12,1 kg/pc.

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm -Weight: 8.6 kg/piece

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-W -Connection: DN32 PN6 -Quantity: 4x valve available -Price per piece -Dimension: 180/120/H230 mm -Weight: 5.2 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 30E7 -Connection: DN50 PN6 -Quantity: 5x valve available -Price per piece -Dimension: 150/140/H295 mm -Weight: 7.4 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 40 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 7.7 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN100 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 210/195/H420 mm -Weight: 14.8 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 65 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 17.7 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 180/140/H250 mm -Weight: 5.9 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 32 PN 6 -Quantity: 3x valve available -Price per piece -Dimension: 180/140/H175 mm -Weight: 6,8 kg/pc.

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, Gate valve type BOA-C JL1040 -Connection: DN25 PN6 -Number: 4x valves available -Price: per piece -Dimensions: 120/100/H210 mm -Weight: 2.3 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-H JL1040 -Connection: DN 15 PN 16 -Quantity: 1x valve available -Dimension: 130/125/H230 mm -Weight: 3.1 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve type JL1040 without drive -Connection: DN50 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 230/165/H200 mm -Weight: 10.4 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/170/H305 mm -Weight: 10.3 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C -Connection: DN50 PN6 -Quantity: 4x valve available -Price per piece -Dimension: 120/100/H210 mm -Weight: 6 kg/pc.