118 offers

Category: 102
item-No.: 126738572
DOOSAN rotation. -Milling Center MOD. PUMA - MX 2500 ST / BJ. 2006 / 4-axis - XYZB: 555-160 - 1095 - 240 / magazine 40 / 12 powered tools / 10,000 rpm / Ã? bed 750 - sled 600 / spindle up to 360 ° in 30° cuts / high pressure up to 70 bar / bar loader up to 1500 / Accessories: 2 Dr eibakenfutter 254 mm - 1 three-jaw Chuck 315 mm - 1 two jaw Chuck 315 mm - 60 pieces CAPTO - C 6 / March 2018 new Milling spindle bearings / good condition fe.gi.maschinen.sbg.at DOOSAN turning - milling center mod. PUMA - MX  ...
Category: 102
item-No.: 126864586
turning diameter over bed: 390 mm turning diameter over slide rest: 240 mm turning length: 765 mm weight of the machine ca.: 1,2 t Digitalanzeige, Multifix, Futter Forkhard 200 DRO, Multifix, Chuck Forkhard 200 Technische Daten / technical details: Spitzenhöhe / center height 190 mm Spitzenweite / center to center 765 mm Dreh-Ø über Bett / turning y over bed 390 mm Dreh-Ø über Schlitten / turning Ø over sledge 240 mm Spindelbohrung / spindle hole 54 mm Drehzahlbereich / spindle speed 25-2000 UpM  ...
Category: 102
item-No.: 126532708
EMCO cnc lathe mod Emcoturn 332 - MC plus / BJ. 2001 / 4-axis / Ã? 220 / rods Ã? 45 / cnc Siemens 840 D 1 RPM 7,000 rpm 2 x 12 Pocket revolver with driven tools / C-axis main spindle / 3 - jaw Chuck / chip conveyors / bar feeder KUPA ch 42 (6-42 mm.-650-1200 mm) / the machine is equipped with clamping means on both sides and 6 (not driven) tool holder (total 12) / main spindle: clamping Collet fixture type 173E / counter spindle: clamping Collet fixture Hainbuch Gr32 and Röhm 3Backenfutter KFD HS-130 ...
Category: 110
item-No.: 126493470
diameter: 400 mm,passage: 100 mm,width: Futter 120 mm,weight of the machine approx.: 85 kg,4 jaws lathe chuck according Norm TGL 30-22313
Category: 102
item-No.: 125934190
2008
175.500 €
-
CNC lathe DOOSAN PUMA MX 2100 ST bearing no 1105-02422 category CNC lathe make DOOSAN type PUMA MX 2100 ST year 2008 State second-hand machine CNC CNC FANUC 31 I storage HAGUENAU origin KORREA delivery immediately Frachtbas Site is free loaded further details on request technical details turning diameter 750 mm turning length 1020 mm CNC FANUC 31 I turning diameter over bed slide 650 mm centre height 350 mm spindle drive 29 kW spindle speed 5000 RPM Futterdurchm Esser 250 mm Auger drive 20 kW speed tool 12000 RPM f ...
Category: 110
item-No.: 126493760
diameter: 400 mm,Torque: 650,passage: 100 mm,width: Futter 90 mm,weight of the machine approx.: 46 kg,4 jaws lathe chuck according Norm TGL 30-2332
Category: 110
item-No.: 125745299
Power chucks for CNC lathes, hydraulic, Drawtube required three-jaw Chuck of HSE 315 for hollow voltage Outside diameter 315 mm, hole diameter approx. 80 mm. Feed width with flange approx. 110 mm, without JAWS The lining is about 45-50 kg.
Category: 110
item-No.: 126493582
diameter: 430 mm,passage: 140 mm,width: Futter 100 mm,weight of the machine approx.: 75 kg,4 jaws lathe chuck
Category: 110
item-No.: 125745290
Power chucks for CNC lathes, hydraulic, Drawtube required three-jaw Chuck of SMW HKF S250 for hollow voltage Outer diameter 250 mm, diameter 65 mm. Flange mount ø 220 for recording J6; Cone size KK 6 is not part of possible 106.5 mm flange the scope of supply also the connecting tube view feed back. Mounting hole circle with four studs Feed width with flange approx. 110 mm, without JAWS The lining is about 45-50 kg.
Category: 109
item-No.: 126493585
table length: 560 mm,Table width: 380 mm,ampere: ,workpiece weight: max:350 kg,x-axis: 350 mm,y-axis: 250 mm,z-axis: 300 mm,generator - rated current: 64 A,workpiece height: 200 mm,electrics - voltage/frequency: 380/50 V/Hz,spindle nose: (ohne Futter) 540 mm,total power requirement: 9,5 kW,weight of the machine ca.: 2,4 t,space requirements of the machine approx.: 2,05 x 3,3 x 2,50 BxLxH m,SPARK EROSION CAVITY SINKING MACHINE DOCUMENTATION available C-type with fixted table. Control: CNC -Charmilles technologies, ...
Category: 110
item-No.: 125745288
-
600 €
-
Manual Chuck, FORKARDT, three-jaw Chuck (wedge bar) Outside diameter 315 mm, incl. 1 set stepped block JAWS FSTB 315 Hole diameter approx. 90 mm. Flange mount J6; Cone size KK 6 approx 106.5 mm mounting hole circle with four studs Chuck key unfortunately does not exist Feed width with flange approx. 130 mm, without JAWS The lining is about 50-55 kg.
Category: 101
item-No.: 126492863
bore capacity in steel (diameter): 8 mm,throat: 125 mm,bore stroke: 50 mm,feed - manual: ja mm,distance table - lower edge spindle: 230 mm,table-size: 200 x 200 mm,spindle taper MT: Bohrfutter max. D=8 mm,number of revolutions per minute: 400 - 4700 / 6 x step U/min,voltage: 380 V ,total power requirement: 0,165 kW,machine weight ab.: 61 kg,space requirements approx. LxWxH: L:0,5 x B:0,3 x H:0,6 m,base stand 330 x 270 mm pillar diameter: 50 mm equipment: - rotating wire brush dia. = 60 mm - quick-action drill chuck ...
Category: 102
item-No.: 126229098
Sph 280 mm Spw 2000 mm Umlauf in Kröpfung Ø 760 mm Spindelbohrung Ø 85 mm Futter Ø 315 Multifix C 3-fach Digital U/min. 30-1500 1 Lynette 4-Backen-Futter Ø 315 mm Planscheibe Ø 400 mm Stellmaße: ca. L 3,7 m x B 1,3 m x H 1,5 m Gewicht ca. 2,6 To
Category: 102
item-No.: 126127572
turning diameter over bed:400 mm turning diameter over slide rest:220 mm turning length:680 mm spindle bore:50 mm tail stock:MK 5 spindle turning speed range:12,5 - 2000 U/min accessories::4-Backenfutter,-Flansch total power requirement:10 kW weight of the machine ca.:2050 kg dimensions of the machine ca.:250 x 1000 x 1300 mm
Category: 102
item-No.: 126229106
Sph 254 mm Spw 1500 mm Spindelbohrung 57 mm 3-fach Digital Multifix C Spannfutter Ø 250 mm Reitstock Gewicht 6 To
Category: 209
item-No.: 126086222
-
20 €
Land-de DE
Türfutterstrebe
Category: 110
item-No.: 125563531
Electric Chuck guard D 500 27-06-003 delivery time: immediate number: 27-06-003 manufacturer: Chuck guard type: D 500 MACHINE data year: new L x W x h: approx. 300 x 300 x 300 mm weight: approx. 4 kg TECHNICAL data - electric Chuck guard due among other things to: hamlet can; Condor & intern Max turning diameter: approx. 500 mm cover range: approx. 200 mm accessories â?¢ mounting bracket â?¢ limit switches with electric cable accessories on request price and other specifications on r ...
Category: 202
item-No.: 126086016
1995
2.950 €
Land-de DE
Bearbeitungszentrum \r\nFabrikat: Eumacob\r\nTyp: Eumaspeed 14-8\r\nBaujahr: 1995\r\n\r\nTechnische Daten:\r\nHub X-Achse: 1390mm\r\nHub Y-Achse: 740mm\r\nPneumatische Vertikalverschiebung der Bohrspindeln: 60 mm\r\n\r\nGeschwindigkeit:\r\nX-Achse: max. 35m/min\r\nY-Achse: max. 350m/min\r\n\r\nArbeitshub Z-Achse 85 mm\r\nMax. Tafelstärke (=max. Borhtiefe) 50mm\r\nDrehgeschwindigkeit der Spannfutter und der Säge: 4400 UpM\r\nMöglichkeit zum Bohren der langen Werkstücke: 2800mm\r\n\r\nMotor Vakuumpumpe: 2 PS\r\n\ ...
Category: 102
item-No.: 125355431
2007
55.000 €
-
CNC lathe Gildemeister twin 32 bearing no 1105-00067 category CNC lathe make Gildemeister type twin 32 year 2007 State second-hand machine control CNC Sinumerik 840 D storage France country of origin Germany delivery time after Abspr at cargo base from site technical details Rod diameter 32 mm spindle diameter 100 mm turning length 580 mm speed 25-8,000 rpm per C-axis, 0.001 ° degrees sub spindle indexing Yes / yes Rod diameter 37 mm speed 31-6,300 RPM indexing per C-axis, 0.001 ° degree turret (x-x) 2 x 12 x VDI ...
Category: 205
item-No.: 126086626
Dübellochbohrmaschine\r\nVITAP\r\nSUPERFAST 35\r\n\r\nMit 1 Bohrbalken 35 Spindeln / 32 mm Raster.\r\nSeitliche Anschläge mit Digitalanzeigen.\r\nPneumatische Schwenkung für Horizontal / Vertikal Position des Bohrbalkens und jeglichem Zwischenwinkel.\r\nSeitliche Anschläge mit elektronischen Digitalanzeigen.\r\nVorderer Anschlag mit mechanischer Digitalanzeige.\r\n2 Anschlagleisten mit 2 Anschlägen (1500 mm je Seite)\r\nAutomatische Tiefendifferrenzzustellung der horizontalen und vertikalen Bohrtiefe um eine B ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more FUTTER types: