ft nir used for sale

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Single-phase isolation transformer, isolating transformer, solid rubber distributor -Manufacturer: Foster, transformer isolation transformer -Type: 1FT22 82 -Primary: 220V 50Hz -Secondary: 42 V see photo nameplate -Power: 1kVA -Number: 3x transformer available -Price per piece -Dimension.: 350/220/H210 mm -Weight: 17 kg/pc.

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Siemens servo motor type 1 FT5062-OAF01-2-Z with encoder Heidenhain -Speed: 3000 rpm -Voltage: 150V -Shaft: Ø 19 x 40 mm -Encoder: Heidenhain ROD 456 - 500 -Number: 2 engines available -Price per piece -Dimensions: 345/116/H165 mm -Weight: 7.3 kg/pc.

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Manufacturer motor: Siemens, type 1 FT5072-OAFO1-2 / brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm // 3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275 / H230 mm -Weight: 29 kg

Level level switch, level sensor Endress + Hauser Liquiphant M FTL51 - AGR2DB1G5A 943491-9000 max. immersion depth: 100 mm Thread: G1 19 - 253 V AC New, with documents ! Dimensions (sensor): 240 x 120 x 100 mm Dimensions ( packaging ): 250 x 140 x 120 mm

Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g

Level level switch, level sensor Endress + Hauser Liquiphant M FTL51 - AGW2DB2G4A 943491-9000 max. immersion depth: 100 mm Thread: G1 10 - 55 V DC New, with documents ! Dimensions (sensor): 240 x 120 x 100 mm Dimensions ( packaging ): 250 x 140 x 120 mm

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

Viewing windows, machine windows, replacement frames RITTAL FT2730 Field of view: 550 x 325 mm External dimensions: 600 x 380 x 35 mm without mounting material ! New ! Dimensions ( packaging ): 640 x 400 x 50 mm

Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 -Pipe connection outlet: DN80 -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

sheet width: 3060 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm back stop - adjustable: 5,0 - 1000 mm work height max.: ca. 820 mm cutting angle: 2,4 ° stroke: 7-12 p/min. down holder: 14 Stück operating pressure: 360 bar Control: ELGO oil volume: 200 ltr. voltage: 400 V total power requirement: 22,0 kW weight: 9000 kg range L-W-H: 4000 x 2300 x 2000 mm Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm zero-backlash ball screw for backgauge Backstop beam can be automatically tilted up in max. position Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - ...

SEW Eurodrive electric motor Fully functional

sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 2.0 ° down holder: 14 Stück no. of strokes: 13 - 18 Hub/min back stop - adjustable: 1000 mm Control: ELGO P40T column arm: 250 mm oil volume: 265 l engine output: 22,0 kW weight: 9600 kg range L-W-H: 4700 x 2300 x 2200 mm New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears oscillating cut - ELGO NC control - model P40T Touch, front left control panel - CNC electro-motorized back gauge, with ball screws including retraction function selectable Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSL ...

sheet width: 3050 mm plate thickness: 6,35 mm thickness at Niro-steel: 4,0 mm down holder: 16 Stück table length: 575 mm Control: AMADA cutting angle: 40° - 2°20 ° 0: 305 bar oil volume: 100 ltr. total power requirement: 5,5 kW weight of the machine ca.: 6150 kg range L-W-H: 3790 x 2090 x 1860 mm maintained condition () Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal bla ...

Positioner Assembly, Fuser Assembly PAGUS Positioning pneumatic approx. 100 mm BOSCH 0 821 405 131 ( 0821405131 ) stroke electric approx. 140 mm < br /> STAR 1460-205-00 SIEMENS 1 FT5046-1AF71-3AB0 345 V Stainless steel carrier plate ! used, tested ! Dimensions: 710 x 460 x 186 mm

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

Banding film BandAll FTN5048150; Width 48mm; Thickness 50 mic; 150 linear meters/roll; 33 cartons of 6 rolls. Banding foil BandAll FTN5048150; width 48mm; thikness 50 mic.; length 150m/roll; 33 cartons each 6 rolls.

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93970 ...

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase electric motor VEM KMR 63 G 6 FTN ( KMR63G6FTN ) 0,25 kW 900 rpm 220 / 380 V 3AC 50 Hz IP44 design: B5 shaft diameter: Ø 14 mm wavelength: 30 mm Groove width: 5 mm flange diameter: Ø 110 / 136 x 136 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 205 x 140 x 170 mm

sheet width: 1050 mm plate thickness: 1 mm distance between columns: 1000 mm weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,16 x 0,93 x 0,73 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4750+800 Nominal / outside width in mm: 885 Belt width in mm: 750 Driven: ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

x-travel: 500 mm y-travel: 320 mm z-travel: 250+80 mm mm total power requirement: kW weight of the machine ca.: 3700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: DAC 310 total power requirement: 11.0 kW weight: 5450 kg range L-W-H: 3800 x 1940 x 1560 mm Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - ...

Used Capsuler Robino Galandrino MONOSTADIO FT6 For PVC capsules Robino Galandrino [...for more information send your inquiry to the seller.] refno: CA38

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

M. No.: 27830/85 Paper size range(cm) : max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Station: TS36/4J Feeder: FT36J Folding unit: KB36

sheet width: 4100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 18 Stück no. of strokes: 15 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC Cybtouch back stop - adjustable: 1000 mm work height max.: 800 mm engine output: 11,0 kW weight: 8.100 kg. range L-W-H: 5000 x 2410 x 1650 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. C ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...

General SKU279U510 LocationBarneveld MakeEscher Wyss TypeFTK 135/450 No.2710214 Year of construction1980 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,7 m Weight2000kg Floorspace3,8x1,03 mFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU065E266 LocationBarneveld Main Features MaterialStainless steel Motor44 KW Inlet diameter210 mm Specified Features - Spray dryer Spray dryerRotary atomiser for spray dryer (1x) Atomiser dia.160mm Motor44 KW, 500 Volt (2940 Rpm) MaterialStainless steel Information Mounted on framecheck Floorspace1,0x1,0 M Total height2,8 M Weight1050 KGSpray dryersNiro AtomizerDryers > Spray dryersBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU061H241 LocationBarneveld MakeGEA TypeNS3015P No.6097 Year of construction2006 Pressure Working pressure125 Bar Main Features Capacity1180 Ltr./Hr. Motor11 KW Pressure125 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity1180 Ltr/Hr Number of pistons:3 Piston stroke60mm Motor11,0 KW, 400/690 Volt Information Weight1000 KG CEcheck Floorspace1,5x1,2 M Total height1,4 MPiston homogenisersGEA NiroMills > Piston homogenisersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used line for bottling and packaging carbonated drinks in 500ml glass bottles. Bottle capacity on 500 ml 22000 L/h Line composition: 1. Demag hoist, year of production 2009, model EUDC Pro 2-250 2. Simonazzi crate depalletizer, model ROBOT DEPAL, year of production 1994 3. Simonazzi bottle unloader, model DECAMATIC, manufactured in 1994 4. KHS bottle washer, model Omega Kaskana 23/87ES01, year of production 1994 5. Simonazzi crate washer, model LAVACCASSE M-2000, year of production 1994 6. Simonazzi fillinf machine, model EUROSTAR RAA-425, year of production 1994 7. Pama tunnel pasteurizer, model PAMA 484 DR, year of production 1994 8. Krones labeling machine, model PRONTOMATIC 720-21-8-8-110RM, year of production 1994 9. Simonazzi crate packing machine, model INCAMATIC IAB 443, year of production 1994 10. Simonazzi crate palletizer, model KOMBI PAL IBP 254, year of production ...

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU225P203 LocationBarneveld MakeAeromatic AG Verfahrenstechnischer Anlagen- und Apparatebau (CH) TypeT-5 No.879028 Year of construction1987 Main Features MaterialStainless steel Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheels(2X) Pan sizesDia: 1070x770x500mm Capacity±150kg With sprayercheck Can be heated by steam(4 bar) With fancheck Capacity1,2 m3/S Motor15kw (Ex) With dust filtercheck Mechanical cleaningcheck MaterialStainless steel Information With switchgearcheck(as is) Floorspace1,8x1,5m Total height+/- 6,0m Weight±2700kg ATEX compatiblecheck Extra Specificationswith heat exchanger Brunner AG, Series no. 41479, Build 1987, Capacity 18.5 Ltr, Working pressure 12.3 bar, Max. temperature 200 Degr. C. Technical specs Extra informationpan dimensions 1070 x 770 x 500 mm Fluid bed dryers batchNir ...

General SKU144P678 LocationBarneveld MakeNiro Atomizer (Patterson Kelley) Type20 CLS ZZ + LB+P Year of construction1990 Technical specs Capacity17000 liter/hour Main Features MaterialStainless steel Motor8.6 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixer-agglomerator (1x) Continuous mixercheck Diameter550mm Length/Depth1750mm, Agglomerator Dia. 950x850mm Inlet400x400mm Outlet600x320mm With motor7,5/8,6 KW, 660 Volt Speed mixer20 Rpm With liquid injectioncheck With lump breakercheck With motor15 KW, Screw dosing (no motor) MaterialStainless steel 1.4301 (304) Information Floorspace4,1x1,4 M Total height2,1 MTumbler mixersNiro AtomizerMixers > Tumbler mixersBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU304P677 LocationBarneveld MakeNiro T.K.Fielder Limited (U.K.) TypePP1 Pharma Matrix Year of construction1994 Main Features MaterialStainless steel Volume10 Ltr. Motor3 KW Specified Features - Universal mixer Universal mixercheck Capacity10 Ltr Vessel sizesdia.280mm x200mm With covercheck Inletdia.20mm With motor3,0 KW, 240/415 Volt (EEx-d IIB T5) With variable speed drivecheck Rotor speed300-1500 rpm With lump breaker/ granulator With motor0,55 KW, 240 Volt (EEx-d IIB T4) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel Information Mach.No.8255 Mount.on stainless steel framecheck With switchcheck With switchgearcheck Floorspace1,0x0,8 M Total height1,6 M ATEX compatiblecheckUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...

General SKU224S098 LocationBarneveld MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel Information Mounted on mild steel framecheck Total height3,2 M Weight1800 Kg Floorspace4,7x1,6 MFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU016F159 LocationBarneveld MakeHolvrieka-Nirota Sneek, Holland Type14000 Ltr. No.921162 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume14000 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304) Capacity14000 Ltr. Vessel sizesdia. 3000x1500mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connectionsdia. 25 mm, dia. 80 mm, dia 125 mm Outletdia. 125mm Pressure vessels Closed vertical tank(1x) Capacity14.000 Ltr Vessel sizesdia. 3000x1500mm Dished topcheck Dished bottomcheck Manholedia. 500 mm Top connectionsdia. 25 mm, dia. 80 mm, dia 125 mm Outletdia. 125mm Information Mounted on legscheck Floorspace3,0x3,0 M Total height4,2 M Weight2000 KGPressure vesselsHolvrieka SneekTanks > Pressure vesselsBrand > Holvrieka Sneek What you can expect from  ...

Tofflon bottling line manufactured in 2022 includes: 1. Sterilization depyrogenation tunnel, model FT0120 2. Vial washing machine, model FW02040 3. Filling and capping machine, model FF0604 4. Vial Sealer Model FC0230 5. Open restricted access barrier oRABS 6. Lyophilizer LYO-10 (CIP, SIP) -RBR All machines included in the line are joined through the appropriate conveyors or storage tables. Aseptic conditions are provided by an open barrier of limited access oRABS. The performance of all machines of the line is synchronized and is according to different bottle formats: 1. R2, R6 filling speed 100 bottles per minute 2. R20 filling speed 70 bottles per minute 3. R50 filling speed 35 bottles per minute Lyophilizer, model LYO-10 (CIP, SIP) –RBR Vial size 2R-50R Total usable shelf area: 9.77 m2 Number of shelves: 9+1 (upper reflective shelf) Capacity: 1.2R-44200 2.6R  ...

plate thickness: 4 mm blade length: 200 mm table surface area: 1000 x 780 mm angle adjustable from - to: 30 - 140 Grad work height max.: 910 mm thickness at Niro-steel: 3 mm total power requirement: 4 kW weight of the machine ca.: 970 kg dimensions of the machine ca.: 1 x 1,66 x 1,47 m Electric 380 Volt: Foot switch: Squaring arm: 2 Stck. Hydraulic notching machine with adjustable angle from 30° to 140°, aut. cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustment Digital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the length reduction option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the mach ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor with brake -Type: 1FT5072-1AF71-4AHO -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui = 367 V -Shaft: Ø 24 x 50 mm -Brake: 24V - 21.3W -Dimensions: 325/144/H175 mm -Weight: 15 kg

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor type 1 FT5064-1AF71-4AG0 -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui= 375 V -Shaft: Ø 19 x 40 mm -Protection class: IP64 -Quantity: 2 engines available -Price per piece -Dimensions: 325/115/H170 mm -Weight: 10 kg/pc.