ft nir used for sale

Bruker MPA FT-NIR Spectrophotometer Bruker NIR for the measurement of liquids in cuvettes or vials Furthermore, for the measurement of solids and semi-solid materials with the help of an integration sphere (diffuse reflection) Integration Ball PbS Detector 12800-3000 1/cm (780-2780nm) Te-InGaAs Detector 12800-4000 1/cm (780-2500 1/cm)

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

2 pieces NIRO belt conveyor belts - Length: approx. 2,000 mm - Width: approx. 600 mm - height adjustable The belt speed can be changed

Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

Manufacturer: GEA / Niro Soavi Type: NS 5160 H YOM: 2004 Capacity: 20,000 l/h max. operating pressure: 220 bar Including Control Cabinet (in excellent condition, recently renewed) Condition: very good

High Pressure Homogeniser Max capacity 5000 L/hour Max pressure 400 bar Number of piston 3 2 Stage Homogeniser Dimentions : Length: 1470mm Depth: 1965mm Height: 1620mm Weight: 2800kg

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment.

GEA Niro NS2006P piston homogeniser Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Properties: Volume 14000 L Manufacturer NIRO SOAVI SP.A. Type E84+B86P4 Last Use Food Technical Documentation Yes Description Manufacturer number: 2060 Capacity: 0-14,000 l/h 2-stage Maximum pressure 1 stage/2 stage: 250/80 bar Model No.: E84 Head Type: SA Series: IE Design: Sanitary Product: Milk Dimensions and weight: Length: 2650 mm Width: 2000 mm Height: 2660 mm Weight: approx. 7.5 tons Instruction manual available!

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU201W009 LocationBarneveld MakeGEA Niro Pharma systems TypeMultiprocessor No.02563.0010 Year of construction2003 Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 and 12 litre Pan sizesDia 120x480 mm and Dia 170x280 mm With pumpcheck Can be heated by steamcheck With fancheck Capacity580 m3/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications- Complete technical file (total 21 folders) - Complete system, including heating system, filters, control valves - Can be used in cleanroom Fluid bed dryers batchGEA NiroDryers > Fluid bed dry ...

General SKU373X908 LocationBarneveld MakeNiro Atomizer TypeSST 208 B No.5032 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Inlet diameter210 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter200 mm Rotor width200 mm Number of locks:6 Lock sizes80x180x40 mm Capacity6 l. every rotation InletDia. 210 mm Outlet225x165 mm Installation height410 mm With motor0,75kW, 500V, 1400 rpm (Ex) With variable speed drivecheck Rotor speedcould be 40rpm Capacity19,2m³/h Information Total height0,41 m Weight100 kg Floorspace1,3x0,35 m ATEX compatiblecheckRotating valvesNiro AtomizerRotary valves > Rotating valvesBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU373X906 LocationBarneveld MakeNiro atomizer TypeSST 208 No.5102 Year of constructionUnknown Main Features MaterialStainless steel Motor0.55 KW Inlet diameter210 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter200 mm Rotor width200 mm Number of locks:6 Lock sizes80x180x40 mm Capacity6 l. every rotation InletDia. 210 mm OutletDia. 150 mm Installation height1050 mm With motor0.55kW, 220V, 1420 rpm, (Ex) Rotor speed40 rpm Capacity19,2m³/h Information Total height1,4 m Weight290 kg Floorspace1,0x0,7 m ATEX compatiblecheck Extra Specificationswith ball segment valve: height ball segment valve: 350 mm inlet/ outlet dia. 150 mm Rotating valvesNiro AtomizerRotary valves > Rotating valvesBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU251X209 MakePall LocationBarneveld CEcheck TypeNiro 600/100 B40 o.D. Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface6 m2 Specified Features - Filterpress MaterialStainless steel 1.4571 (316Ti) Filter presscheck Stainless steel platescheck19x thickness 20/40 mm Internal platen sizes590x590 mm External platen sizes600x600 mm Central inletDN50 With outlets on platenscheck Hydraulic closingcheck Information No.2111 Year of construction2007 Mounted on wheelscheck Floorspace0,80x4,10 m Total height1,40 m Weight750 kg Extra SpecificationsWith 19x9 mm stainless steel plates and 20/40 mm frames, 18x25 mm antistatic Polypropylene chamber plates and 18x40mm frames, 12x polypropylene chambers and 9 frames, Hydraulic unit, LP160, max operating pressure 700 bar, compression pressure 400 bar, : 6 bar, allowable temperat ...

General SKU252W329 MakeGea Niro Soavi TypeAriete NS2006P No.8210 Year of construction2010 LocationBarneveld Pressure Working pressure700 Bar Main Features Capacity60 Ltr./Hr. Motor4 KW Pressure700 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity60L/h Single stagecheck Number of pistons:2 InletDN40 OutletDN40 Motor4.0 kW, 400 volt With variable speed drivecheck With frequence controllercheck Information With switchcheck Floorspace0,90x1,30 m Total height1,14 m CEcheckPiston homogenisersGEA NiroMills > Piston homogenisersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU304P677 MakeNiro T.K.Fielder Limited (U.K.) TypePP1 Pharma Matrix Mach.No.8255 Year of construction1994 Main Features MaterialStainless steel Volume10 Ltr. Motor3 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity10 Ltr Vessel sizesdia.280mm x200mm With covercheck Inletdia.20mm With motor3,0 KW, 240/415 Volt (EEx-d IIB T5) With variable speed drivecheck Rotor speed300-1500 rpm With lump breaker/ granulator With motor0,55 KW, 240 Volt (EEx-d IIB T4) Rotor speed1500/3000 rpm With timercheck Information LocationBarneveld Mount.on stainless steel framecheck With switchcheck With switchgearcheck Floorspace1,0x0,8 M Total height1,6 M ATEX compatiblecheckUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...

General SKU224S098 MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel Information Mounted on mild steel framecheck Floorspace4,7x1,6 M Total height3,2 M Weight1800 KgFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - / Contact us at -

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

General SKU228Y124 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (200 l.) Vessel sizesDia. 900x700 mm Dished bottomcheck Top connectionscheck OutletDN35 With jacketcheck volume 11,75 l. Max. temperature-10/150 With anchor stirrercheck Motor1,5 kW (400 V 1461 rpm) Speed mixing shaft41 rpm With homogenisercheck Motor4,0 kW, (380 V, 2905 rpm) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information MakeNiro Croatia SerialNIC-17-04 TypeCV-201-NR-200 Year of construction2017 Mounted on legscheck With switchgearcheck Floor space1,10x1,10 m Total height1,60 m Weight620 kg Extra SpecificationsWith ball cleaning, con ...

General SKU144P678 MakeNiro Atomizer (Patterson Kelley) Type20 CLS ZZ + LB+P No.080-0027-00 Year of construction1989 LocationBarneveld Technical specs Capacity17000 liter/hour Main Features MaterialStainless steel Motor8.6 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck -agglomerator (1x) Continuous mixercheck Diameter550 mm Length/Depth1750 mm, Agglomerator Dia. 950 x 850 mm Inlet400 x 400mm Outlet600 x 320mm With motor7,5/8,6 KW, 660 Volt Speed mixer20 rpm With liquid injectioncheck With lump breakercheck With motor2,2/2,5 kW 220/480 Volt and 0,37/0,45kW 220/480 Volt With safety gatescheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck Floorspace4,1 x 1,4 m Total height2,1 m Weight3000 kgTumbler mixersDiscountNiro AtomizerMixers > Tumbler mixersDiscountBrand > Niro Atomizer What you ...

General SKU061H241 MakeGEA TypeNS3015P No.6097 Year of construction2006 LocationBarneveld Pressure Working pressure125 Bar Main Features Capacity1180 Ltr./Hr. Motor11 KW Pressure125 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity1180 l./h Number of pistons:3 Piston stroke60 mm Motor11,0 kW, 400—690 V Information Floorspace1,5 x 1,2 m Total height1,4 m Weight1000 kg CEcheck Technical specs Extra informationThe item has missing partsPiston homogenisersDiscountNew arrivalsGEA NiroMills > Piston homogenisersDiscountNew arrivalsBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKU065E266 MakeNiro TypeAtomizer F-60 BBE 16 No.1122 Mounted on framecheck Main Features MaterialStainless steel Motor44 KW Inlet diameter210 mm Specified Features - Spray dryer Spray dryerRotary atomiser for spray dryer (1x) With rotary atomisercheck Atomiser dia.160 mm Motor44 KW, 500 Volt (2940 rpm) MaterialStainless steel Information LocationBarneveld Floorspace1,0 x 1,0 m Total height2,8 m Weight1050 kgSpray dryersDiscountNiro AtomizerDryers > Spray dryersDiscountBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Pratt & Whitney gas turbine generator Model : FT8 Twin pac Power output : 48 MW Voltage : 11 KV Frequency : 50 Hz

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 EUR Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl

FTNON Sanitiser tunnel Serial: 330188 Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

Banding film BandAll FTN5048150; Width 48mm; Thickness 50 mic; 150 linear meters/roll; 33 cartons of 6 rolls. Banding foil BandAll FTN5048150; width 48mm; thikness 50 mic.; length 150m/roll; 33 cartons each 6 rolls.

Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g

Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg