ft nir used for sale

HITECSA DXCZ/FTBZ 501 Tropic (2x) Brand:HITECSA Type:DXCZ/FTBZ 501 Tropic (2x) Stock number:M23-7112 Cooling capacity:30.0 kW Application:Cooling Number of fans:2 + 2 Refrigerant:R407C Refrigerant Content:4 + 4 kg Voltage:400 Volts Power consumption:5 + 5 kW Dimensions:950 x 374 x 1143 mm Year:2018 New/unused Number in stock:8 piece(s) Price:Quotation request Description: New unused A.C. units in Tropic (+55°C) version, ideal for extra warm ambient temperatures. This A.C. installation consists of 2 indoor and 2 outdoor units. They cannot be sold separately, because the control is only in the Master unit. The total capacity varies from 21kW to 30kW, depending on the outside temperature. Visit also our website: used-refrigeration

FLATBED UV LARGE FORMAT PRINTER AGFA ANAPURNA M2540 FB M. No.: 2525797057901 • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers

Smaller than a coffee machine, the ProJet 1200 from 3D Systems is suitable for everyday use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 microns (effective 585 DPI), Vertical build speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL

Smaller than a coffee machine, the ProJet 1200 from 3D Systems is suitable for everyday use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 microns (effective 585 DPI), Vertical build speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL

sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servomotor SIEMENS 1 FT5066-0AC01-1-Z ( 1FT5066-0AC01-1-Z ) 150 V n max 3000 rpm IP67 Dimensions 58x29x14 cm

1. UHT: - GEA Finnah - YOM: 1991 - Capacity: 1200 l/h 2. Steep tank: - Rieger Behälter GmbH - YOM: 2008 - Cooling mantle - Volume: 6,250 l - Max. Pressure: 3.5/-1.0 bar 3. Homogenizer - GEA Nirosoavi NS3037 H - YOM: 2001 - Capacity: 2,000 l/h - 2 stages, max. 250 bar

Stock # U2419-1 Used piston homogenizer by Gea Niro Soavi (IT) model NS1002H. Working output up to 200 l/h. Pressure up to 150 bar. Machine has single stage homogenizing head and is belt driven by el motor 2.2 kW, 940 rpm, 220-240/380-420 V, 50 hz. Mounted on mobile wheels. Last time used in food industry.

Humidity and temperature transmitters E+E ELEKTRONIK EE22 EE22-PFT6A13D07/T04 Measuring range ( humidity ): 0 - 10 0 %RH Measuring range (temperature): 0 - 50 °C Output: 4 - 20 mA Operating voltage: 20 - 35 V DC Sensor: EE07-FT0701/P38091.0004 Dimensions (sensor): Ø 12 mm, length: 75 mm used ! Dimensions (transmitter without sensor): 135 x 110 x 50 mm Dimensions (packaging): 245 x 165 x 55 mm

Three-phase electric motor VEM KMRB 63 G 2/FTII ( KMRB63G2/FTII ) 0,65 kW 3400 rpm 220 / 380 V 3AC 60 Hz Design: B14K IP54 2x shaft diameter: Ø 14 mm, shaft length: 30 mm, groove width: 5 mm Flange diameter: Ø 60 / 90 mm bolt circle diameter: Ø 75 mm 4x threaded hole: M5 x 0.8, depth: 10 mm New ! Dimensions: 240 x 125 x 170 mm

Three-phase electric motor VEM K21R 132 S 4T FTII FNS-K /0543 ( K21R132S4TFTIIFNS-K/0543 ) 5,5 kW 1690 rpm 220 / 380 V 60 Hz IP 55 shaft diameter: Ø 38 mm flange diameter: Ø 250 mm New ! Dimensions: 490 x 250 x 280 mm

Viewing window, machine window RITTAL FT2730 Field of view: 550 x 325 mm External dimensions: 600 x 380 x 35 mm with mounting material ! New ! Dimensions ( packaging ): 640 x 400 x 50 mm

Fan motor VEM EBMOa 63 K2 154/FTII/2 ( EBMOa63K2154/FTII/2 ) TGL 20675 0,25 kW 2830 rpm 220 V IP 44 shaft diameter: Ø 11 mm flange diameter: Ø 90 mm bolt circle diameter: Ø 75 mm, Thread: M5 New ! Dimensions: 200 x 135 x 165 mm

Level level switch Endress + Hauser Liquiphant T DC FTL260-0020 max. immersion depth: 100 mm 10 - 55 V DC G1 used, tested ! Dimensions: 250 x 70 x 50 mm

Fan motor VEM EBR 63.2/2 FTII ( EBR63.2/2FTII ) TGL 11856 0,18 kW 2880 rpm 220 V IP 44 shaft diameter: Ø 11 mm Flange diameter: Ø 90 mm bolt circle diameter: Ø 75 mm, thread: M5 New ! Dimensions: 175 x 120 x 155 mm

Drum pump drive GRÜN FÖRDERTECHNIK ex300 Replacement drive for DL-Niro 420 W 220 V 20 m Kabel Ex protected ! Dimensions: 370 x 210 x 135 mm

Servo motor with brake and angle stepper, permanent magnet motor SIEMENS 1 FT5076-1AF71-3EB0 ( 1FT5076-1AF71-3EB0 ) 3000 rpm IP64 377 5 V shaft: Ø 24 mm flange: 140 x 140 mm angle pacemaker: 6FX2001-2CB00 1000 pulses / revolution used, tested ! Dimensions: 710 x 200 x 240 mm

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

Three-phase electric motor VEM K21R 132 S 4T FTII FNS-K /0543 ( K21R132S4TFTIIFNS-K/0543 ) 5,5 kW 1690 rpm 220 / 380 V 3AC 60 Hz IP 55 shaft diameter: Ø 38 mm Flange diameter: Ø 250 mm New Dimensions: 480 x 250 x 280 mm

sheet width: 2030 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, p ...

Servo motor with brake, permanent magnet motor SIEMENS FT6084 1AF71-1AH1 ( 1FT60841AF71-1AH1 ) 3000 rpm 270 V IP65 Shaft: Ø 32 mm Flange: 155 x 155 mm Spare part for HECKERT CWK400 machining centre, among others ! used, checked ! Dimensions: 400 x 155 x 210 mm

sheet width: 2030 mm plate thickness: 4,00 mm thickness at Niro-steel: 2,50 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, ...

Servo motor with brake, permanent magnet motor SIEMENS FT6084-1AF71-1AH1 ( 1FT60841AF71-1AH1 ) 3000 rpm 291 V IP65 Shaft: Ø 32 mm Flange: 155 x 155 mm Spare part for HECKERT CWK400 machining centre, among others ! used, checked ! Dimensions: 400 x 155 x 210 mm

Servo motor, permanent magnet motor SIEMENS FT6084-1AF71-1AG1 ( 1FT60841AF71-1AG1 ) 3000 rpm 291 V IP65 Shaft: Ø 32 mm Flange: 155 x 155 mm spare part for HECKERT CWK400 machining centre, among others ! used, checked ! Dimensions: 370 x 155 x 210 mm

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,

Servo motor with brake, permanent magnet motor SIEMENS FT6084-1AF71-1AH1 ( 1FT60841AF71-1AH1 ) 3000 rpm 270 V IP65 Shaft: Ø 32 mm Flange: 155 x 155 mm Spare part for HECKERT CWK400 machining centre, among others ! used, checked ! Dimensions: 400 x 155 x 210 mm

Manufacturer: Siemens Z Achsmotor IMA Bima 410, Type: Permanentmagnetmotor , Model: 1 FT5064-1AG71-4BB0, Serial number: NoEH063 7112 01 004 VDE 0530,

Filter bag in set FILTERTECHNIK JÄGER, FTJ 2-PES-200μ/Vz 200 Micron galvanized steel ring (sewn in): Ø 180 mm Bag length: 810 mm Material: polyester filter set consists of 3 filters ! New ! Dimensions (packaging): 400 x 300 x 80

sheet width: 2540 mm plate thickness: 2,0 mm thickness at Niro-steel: 1,25 mm no. of strokes: 34 Hub/min cutting angle: 1,4° table height: 820 mm distance between columns: 2600 mm Control: konv. engine output: 4,0 kW weight of the machine ca.: 1330 kg. range L-W-H: 2892 x 1865 x 1430 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - freely movable foot switch - Operation manual Special accessories included: - electro-motorized back gauge with analogue position display Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93253 ...

Gear motor, worm gear motor VEM motor: KPR 56 G 4/FTII ( KPR56G4/FTII ) 0,18 kW 2.25 rpm (counted) 220 / 380 V 3AC IP54 Shaft diameter: 16 mm Flange diameter: 135 mm New Dimensions: 330 x 170 x 160 mm

sheet width: 1040 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm blade length: 1100 mm no. of strokes: ca. 38 Hub/min back stop - adjustable: ca. 500 mm Control: konv. table height: 820 mm Number of working hours: ca. 610 h engine output: 5,0 kW weight: 2250 kg range L-W-H: 1650 x 1900 x 1300 mm Machine from a maintenance workshop with only approx. 610 operating hours () Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 - ...

Servo motor with gearbox and encoder, permanent magnet motor SIEMENS 1 FT5076-1AF71-3EA0 ( 1FT5076-1AF71-3EA0 ) 3000 rpm IP64 375 V Gearbox: SUMITOMO CYCLO EUROPE TYPE XFCGS i = 17 Shaft: Ø 38 mm Flange: Ø 200 mm Encoder: 6FX2001-2CB00 components also available separately ! spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 710 x 200 x 240 mm

Servo motor with gearbox and brake, permanent magnet motor SIEMENS 1 FT6064-6AF71-4EH1-Z ( 1FT6064-6AF71-4EH1-Z ) 3000 rpm IP65 291 V gearbox: ALPHA GETRIEBEBAU TYPE SPG 100 - M1 - 7 i = 7 shaft: Ø 32 mm flange: Ø 90 / 100 x 100 mm used, tested ! engine and gearbox also available separately. Dimensions: 540 x 120 x 150 mm

Centrifugal fan, centrifugal fan, centrifugal fan VEM KPR 63 K 2 FTII impeller: Ø 160 mm Motor : 0,,32 kW 220 / 380 V 2790 rpm IP54 flange outlet: 170 x 170 mm blower e.g. for forced ventilation of DC motors ! New ! Dimensions: 430 x 270 x 310 mm

Rotary actuator FTW, PRODUCTION TECHNOLOGY Weißenfels DR400 AV Rotation angle: 360° turntable: Ø 420 mm Fastening flange: 530 x 505 mm Drive ring: Ø 128 / 108 mm Guide bolt: Ø 65 mm Flange for drive: Ø 80 / 130 mm, Bolt circle diameter: Ø 165 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 530 x 515 x 450 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump LOWARA, FTI DB22P-B-2-04 Pressure: max. 6,2 bar ( 90 psi ) impeller: Ø 178 mm ( 7.0 ( inches ) ) connections: G2 ( inches ) motor: PLM112RB14S1/340 4.0 KW 2900 rpm 400 / 690 V 3AC IP55 pump material: Plastic used, tested ! Dimensions: 635 x 295 x 345 mm

Submersible pump, coolant pump BRINKMANN FT35/360 Immersion depth: 360 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q = 40 l/min H = 2 m Engine: 0,,21 kW 220/380 V Dimensions: 515 x 160 x 130 mm New !

Key data: 600 mm, 400 mm, 425 mm

Inv. Num. : 6808 Type: DMP 60V linear Producer: Deckel Maho Created: 2004 Parameters: Control system: Siemens Sinumerik 840D Duty cycle: 93000 h Operating hours: 64000 h Work table length: 1050 mm Work table width: 660 mm Maximum table load (uniform): 300 kg Tool magazine capacity: 25 pieces Number of synchronized axes: 4 pieces Speed: 20-18,000 1/min X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 425 mm Cone: HSK A63 Maximum tool length: 250 mm Machine height: 2700 mm Machine length: 3300 mm Machine width: 2000 mm Machine weight: 7700 kg Equipment: Chip conveyor IKF 400/3120 Filter equipment Interlit SP8/300 Vacuum 4 axle FTW/type TG 160

In-line pump, vertical centrifugal pump GRUNDFOS CRNE1-7 E-CX-GI-E-HQQE A96843944P10826 Q: 1.8 m3/h H: 33.6 m H max: 43,6 mbr /br /H max: 43,43,7 25 bar 120 °C engine: MGE90SA2-FT100-D 0.75 kW 2873 rpm 380 - 480 V 3AC 50 / 60 Hz New ! Dimension: 270 x 260 x 610 mm

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

In-line pump, vertical centrifugal pump GRUNDFOS CRNE5-10 E-CX-GI-E-HQQE A96843945P10826 Q: 5.8 m3/h H: 51.8 m H max: 69,8 mbr /br /H max: 69,69,8 m3/hbr /br /H: 51.8 mbr /br /H max: 69,69,H 7 m 25 bar 120 °C engine: MGE90SB2-FT115-D1 1,5 kW 2896 rpm 380 - 480 V 3AC 50 / 60 Hz New Dimension: 270 x 260 x 770 mm

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L ...

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 0300 switching point: 275 mm 10 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 280 mm max. immersion depth with adapter: 190 mm used, tested ! Dimensions: 420 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 0800 switching point: 775 mm 10 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 780 mm max. immersion depth with adapter: 690 mm used, tested ! Dimensions: 920 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 1000 switching point: 975 mm 1410 0 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 980 mm max. immersion depth with adapter: 890 mm used, tested ! Dimensions: 1120 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant T FTL20-0020 switching point: 13 mm 10 - 35 V DC max. immersion depth: 38 mm used, tested ! Dimensions: 155 x 50 x 35 mm

Tubular Sliding Hook, Euro Hook, Meat Hook, Meat Hook -Upper part: galvanized flat steel -Lower part: NIROSTA -Number: 60 hooks available -Price per piece -Weight per piece: 3-hook 5 kg / 4-hook 4 kg -Total weight including storage box: 350 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Single-phase isolation transformer, isolating transformer, solid rubber distributor -Manufacturer: Foster, transformer isolation transformer -Type: 1FT22 82 -Primary: 220V 50Hz -Secondary: 42 V see photo nameplate -Power: 1kVA -Number: 3x transformer available -Price per piece -Dimension.: 350/220/H210 mm -Weight: 17 kg/pc.

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Siemens servo motor type 1 FT5062-OAF01-2-Z with encoder Heidenhain -Speed: 3000 rpm -Voltage: 150V -Shaft: Ø 19 x 40 mm -Encoder: Heidenhain ROD 456 - 500 -Number: 2 engines available -Price per piece -Dimensions: 345/116/H165 mm -Weight: 7.3 kg/pc.