ft nir used for sale

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg

Relay, contactor, semiconductor contactor, contactor -Type: FTT-10/3150 -Weight: 1 kg

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

Manufacturer: DS AUTOMOTION GmbH Machine type: Industrial truck Design: Automated Guided Vehicle (AGV) Year of manufacture: 2018 Hours: 504 hours Mileage: 870 km Condition: good (expert opinion by Dekra) Speed v min.: 0.1 m/s Speed v max.: 1.2 m/s Transport load: 1,200 kg Travel Drive Type: Servo Gear Motor, Brushless Power drive drive: 2x 1.09 kW Operating modes: automatic (control station) or manual operation (remote control wired) Power supply: Lithium ion battery 24 VDC (25.2 VDC) Make: Triathlon Battery capacity: 100 Ah Battery weight: 50 kg Area of application: closed room, max. 80% humidity Length FTS: 1,650 mm AGV width: 990 mm Height FTS: 505 mm Ground clearance FTS: 30 mm Max. length of goods to be conveyed: 2700 mm Max. width of the goods to be conveyed: 1800 mm

Used VACUUM CHAMBER. Device designed for structural impregnation of mushrooms with water or preservative solutions to specific technological parameters. Dutch production FTNON. Capacity - Pallet 1200X1000 mm (approx. 500 kg of mushrooms in 3 kg boxes). Fully automatic. Additional tank with a mixer and automatic additive dosing pump. Fully automatic cycle. Very good condition. Full documentation. Stainless steel.

Fire button, smoke vent button, push button, limit switch -24 VDC -Price: per piece -Quantity: 3 available -Weight: 0.6 kg/piece

Servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor with brake -Type: 1 FT5072-1AF71-4AH0 -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui = 367 V -Shaft: Ø 24 x 50 mm -Brake: 24V - 21.3W -Dimensions: 325/144/H175 mm -Weight: 15 kg

Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Vibrating motor / vibration motor Manufacturer: Friedrich SKU: FTKX 1750-6-7 5.6kW The spare part is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Roll to roll cutter -Year 2008, max roll diameter 450 mms. -Max width 360 mms . -Inverter with speed control -Many cutting devices for any size

2020 Neumaier Industry Factory Train FT830 Route tugger train. DESCRIPTION: The object of realisation is a Factory Train FT830 tugger train from the company Neumaier Industry Description: - The tugger train was only used a few times / year of construction 2020 - Unladen weight 3578 kg / permissible total weight 7178 kg - Payload 3600 kg / 1800 kg per wagon unit on 3 pallets or transport trolleys - Length 10.8 m, width 1.6 m, height 2.3 m - Active steering system - Electronic braking system Main components: - FT830 initial module - EV6 frame Goods carrier - Main module FT830 - EV6 frame product carrier - End module FT830 Current condition / photo documentation: Find more here - / Contact us at -

CNC lathe Type: FTC 350 XLS Manufacturer: Feeler Year: 2014 Control: Fanuc Turning diam. above the bed: 630 mm Max.turning diameter: 350 mm Max.turning length: 870 mm Chip conveyor Toolholders Machine in good condition, under power. Find more here - / Contact us at -

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description ROTARY TABLE DIAMETER 1500mm MAXIMUM MOLD DIMENSION 400X400mm

Fully Automatic Ergonomic Car Platform CEIT FTS CEIT 3000 AFR | 2019 Variant F N02 Maximum movement speed 0.75 m/s, maximum undercarriage weight 3000 kg, crawler weight 375 kg, maximum tractive force 1000 N, operating voltage 36 V=, power 1200 W (unused) Automatic Ergonomic Car Platform CEIT FTS CEIT 3000 AFR Year: 2019 QUANTITY 5 PIECES

weight max. in kg: 650 kg fork length: 1150 mm stroke height: ß mm weight of the machine ca.: 250 KG dimensions of the machine ca.: 311,3 m No. 5130 Electric pallet truck / Automated guided vehicle FTF S-Electronics / LogisticJet Paleti / FTF Own weight approx. 250 kg Working area: Dimensions 2916 x 800 x 1220 Load capacity 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 48 / 4,2 / 4,9 / 2,5 kW volt: 400 V weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,2 0,8 1,6 m No. 5388: 1 used set spindle motor + axle motor + lubrication Made by SIEMENS / VOGEL, type 1GG5 / FT5106 / FT5074 suitable e.g. forHEYLIGENSTAEDT Heynumat 10 Siemens: 1 x 1GG5 182-0WD40-6HU5 - 48 kW / 4200 min-1 2 x 1 FT5106-0AA01-Z - 4.15 kW / 1200 min-1 1 x 1 FT5106-0AC01-Z - 4.82 kW / 2000 min-1 1 x 1 FT 5074-0AC01-Z - 2.51 kW / 2000 min-1 VOGEL: 1 x ZM 1005 1 x MFE 5 / BW 7 Foot switch set Transport dimensions approx. 1200 x 800 x 1600 mm Weight approx. 650 kg ( estimated ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - The machines are in good technical and visual condition. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/735 mm Spindle speed: 60 - 4,200 1/min Table size: 1,270 x 254 mm Max. table load: 200 kg T-slots: 3 x 16 T-slot spacing: 63 mm Weight: 1,100  ...

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - defective, gear wheel worn, milling head already dismantled, replacement of the gear wheel was no longer possible due to insolvency, spare parts costs according to the former operator approx. 1,500 EUR. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/73 ...

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

TOFFLON VIALS FILLING LINE The line can be adapted to different production modes and can be flexibly connected to lyophilization systems. --- 1) Tofflon Washing Machine FW03024 Year of manufacturing: 2019 Washing machine for vials. PRODUCTION: Filling range: 2-100 ml (ca) • Cleaning speed: 7ml-100VPM • Operation mode: servo drive OTHER CHARACTERISTICS • Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) • Power (kW): 13-15 (ca) --- 2) Tofflon Tunnel, model FT0110 Year of manufacturing: 2019 For cleaning and filling vials. --- 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing vials. --- 4) Tofflon Capping Machine, model FC0210 Year of manufacturing: 2019 For capping closed vials. PRODUCTION • Production range: 2-100ml • Production speed: 10ml-100VPM • Number of capping heads: 6 OTHER CHARACTE ...

Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck

An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible.

Used tool carriersManufacturer Frimo to give away. 5 pcs type FT 8060, clamping surface 800 x 600 mm, lengt 1400 mm,width 1150 mm,heigth 1720 mm, year 2015 5 pcs type FT 6060, clamping surface 600 x 600 mm, lengt 1360 mm,width 1145 mm,heigth 1615 mm, year 2014. The tool carriers are in good condition and are available immediately.

SPECTOMETER AGILENT CARY 600 FTIR in excellent condition

connected load frequency: 230 V dimensions: 1,6 x 0,8 x 1,55 mm weight: kg Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

General SKU279U510 MakeEscher Wyss LocationBarneveld TypeFTK 135/450 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information No.2710214 Year of construction1980 Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

ANACONDA FTR 200 with CAT 2.8 (55kW) – TIER 5, ANACONDA FTR 200 with JCB Dieselmax (55kW) – Tier 5, ANACONDA FTR 200 with DEUTZ TD 2.9 L4 (50kW) – TIER 5, 20 m long conveyer belt, Bunker standard 6 cm³ with optional increase 10 cm³, Hydraulically foldable rear section, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 4-ply construction., Hopper capacity: max. 10 m³ (with extensions), Variable speeds, Hydraulic support legs for easy setup, Hydraulisch klappbarer Kopfbereich serienmäßig, Easy access to the engine bay, Weight: 14.485 kg – 14.485 tons depending on equipment, Weight with tipping grate: 17,000 kg, Weight with vibrating screen: 18.985 kg, Weight with tipping grate: 17.000 kg, Weight with vibrating screen: 18.985 kg

wire diameter 0,5-2 mm spring diameter 20 mm flange length 80x120 mm working width 90 mm output - pieces/min 70

for torsion springs wire diameter 0,5-2 mm spring diameter 20 mm output pieces/min 70 spiral length 80 x 120 mm

From a recent recycling we offer you a DAF tractor unit, FTXG 480. Year of construction: 2024 Registration date: 10.02.2025 Condition: no defects or damage known HOURS/KM: approx. 41,000 KM Asking price: VHB 92.500,00 EUR Original price: 118.500,00 EUR Equipment / accessories / other information: Asset Manager: Mathias Vorkötter Phone: +49 202 - 25727 3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 17153 Jürgenstorf The sale is without warranty Subject to prior sale

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275/H230 mm -Weight: 29 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Siemens servomotor type 1 FT5062-OAF01-2-Z with Heidenhain rotary encoder -Speed: 3000 rpm -Voltage: 150 V -Shaft: Ø 19 x 40 mm -Rotary encoder: Heidenhain ROD 456 - 500 -Number: 2 motors available -Price: per piece -Dimensions: 345/116/H165 mm -Weight: 7.3 kg/pc.

Single-phase isolation transformer, isolating transformer, solid rubber distributor -Manufacturer: Foster, transformer isolation transformer -Type: 1FT22 82 -Primary: 220V 50Hz -Secondary: 42 V see photo nameplate -Power: 1kVA -Number: 3x transformer available -Price per piece -Dimension.: 350/220/H210 mm -Weight: 17 kg/pc.

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Siemens, servo motor type 1 FT5064-1AF71-4AG0 -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui= 375 V -Shaft: Ø 19 x 40 mm -Protection class: IP64 -Quantity: 2 engines available -Price per piece -Dimensions: 325/115/H170 mm -Weight: 10 kg/pc.

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system -Manufacturer: Wuxi Oulongyu Automation Technology, granule conveyor vacuum suction conveying system -Type: OLY-FS300 -Dosing device: OLY CLY-FT20 -Individual components: see photos -Quantity: 1 device available -Dimensions: 860/800/H2360 mm -Weight: 244 kg

turning diameter over bed: 1420 mm turning diameter over slide rest: 1000 mm turning length: 15000 mm turning dia. in gap: 2050 mm spindle diameter: 160 mm speed: 1 - 400 U/min faceplate diameter: mm spindle motor: 30 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate - 4 Steady rest - 4-way toolpost - Rapid traverse - tailstock - Taper turning attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Specifications & Performance Data The Used Capsuling Machine Robino & Galandrino MONOSTADIO FT6 is a high-precision rotary capsuler designed for PVC capsule application on sparkling wine formats. Engineered for reliable operation in demanding beverage production environments, this second hand unit combines throughput with precise capsule placement for professional finishes on glass bottles. Manufacturer / Model: Robino & Galandrino MONOSTADIO FT6 Year of manufacture: 2010 Machine category: Capsuling machine (PVC capsules) Production speed: up to 7,000 bottles/hour (format-dependent) No. of heads: 6-head rotary carousel for continuous operation Container type: Glass bottles Bottle format: 0.75 L (typical sparkling wine “Spumante” format) Product type focus: Spumante and sparkling-style wine applications Safety: Safety features included (guarding and interlocked access) ...

Auction-ID: A1-41275-16