134,810 used machines on RESALE, but how to find them? Machine Search
Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 860 mm y-travel: 560 mm z-travel: 600 mm table-size: 1000x560 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 6.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.
Kannegiesser belt conveyor GF 4200-880-800 RA2512 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 4200 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 4200 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: 0,75/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine ind ...
Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.
B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
A total of five mobile antiviral air purifiers Mann & Hummel are available. Air change rate at 70m²: 5-fold, max. indoor room size: 70m², max. air volume flow: 950m³/h, prefilter: ISO ePM10, main filter: HEPA H14, min. separation efficiency: 99.995%. Machine dimensions X/Y/Z: approx. 770mm/510mm/630mm, weight: approx. 60kg. Three units have approx. 1000 operating hours, the remaining two are in original packaging. Documentation available. An on-site inspection is possible.
A custom-built Nordgreif mat gripper for reinforcing steel is available. Load capacity: 6000kg, gripping width range: 2100mm-2520mm, max. opening width: approx. 2660mm, length: 5080mm, mat hooks: 2x3, mat length range: 5100mm-8100mm, mat width range: 2100mm-2520mm, mat height range: 150mm-800mm. Documentation available. An on-site inspection is possible.
- Station is connected and was in operation at a CHP plant - Went into operation in 2014 - AVACON grid area - has been serviced via maintenance contract from AVACON -
7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...
This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details.
Presse à injecter ENGEL 800 T type DUO 5550/800? Nombre d’heures : 21 000 h ?Force de fermeture : 800 T - 8 000 KN? Diamètre vis : 90 mm? Volume injectable : 2 740 cm3? Pression d’injection : 1920 bars Rapport L/D : 20 Entre colonnes. : 1025 x 935 mm Dimensions des plateaux : 1570 x 1480 mm? Epaisseur moule mini : 650 mm ?Dimensions : 10 080 x 3 000 x 2 120 mm? Poids : 44 Tonnes
General SKU212T120 MakeEnco LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Bioreactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN100 OutletDN80 Half coil jacketed(280 Ltr.) Max. temperature200 °C With paddle stirrer(EKATO, EM 2060) Motor5,5 kW 400 Volt Speed mixing shaft59 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti) General No.3385/42.1 Year of construction1990 Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoBior ...
General SKU212T119 MakeEnco LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Bioreactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck ManholeDN450 Top connectionsDN50, DN100 OutletDN80 (3x) Half coil jacketed(280 Ltr.) Max. temperature200 °C With paddle stirrercheck Motor5,5 kW, Speed mixing shaft59 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti) General No.3385/50.1 Year of construction1990 Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoBioreactorsSolid pharmaceuticsDyes & pig ...
This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.
This 3-axis RECKERMANN VMC 850 was manufactured in 1999. It features an internal coolant supply and is equipped with a Heidenhain TNC 430 control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the RECKERMANN VMC 850 vertical machining centre we have for sale. Contact us for further details.
This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.
Mössner Rekord SSF 801 Band Saw Machine The most powerful Mössner band saw, it is used when maximum performance is required. The absolute flagship among high-performance vertical band saws This machine stands for maximum precision, extremely smooth running and uncompromising durability in continuous industrial use. Basic equipment of the band saw Band saw stand in stable cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer, 2-speed manual transmission or cutting speeds infinitely adjustable with flange bearing and frequency converter Manual belt tensioning device with hydraulic display Tiltable work table – up to 30° on the right, up to 15° on the left Replaceable aluminum wheels with hard rubber lining Upper impeller adjustable Safety door switches on the impeller doors Paintwork: RAL 7035 light g ...
WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg
WIRBEL K 855 HP 7,5 Industrial Dry Vacuum Cleaner -CE - Identifier -Mint condition -Motor power 5.5 KW -Filter area 1.2 m2 -Tank volume 60 liters -Air flow rate 135 L/sec -Vacuum (vacuum) approx. 300mbar -Suction hose -Connection cable Dimensions: LxWxH 1.2x0.6x1.3 meters / weight 125 kg
Key data: 800 mm, 540 mm, 560 mm
Inv. Num. : 9243 Type: CFV 800 Producer: Cincinnati Generated: Parameters: Control system: Heidenhain iTNC 530 Work table length: 950 mm Work table width: 520 mm Maximum table load (uniform): 400 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 540 mm Travel Z-axis: 560 mm
Box Length: 6,600 mm, Feed Box Width: 2,200 mm, Press Box Width: 2,000 mm, Box depth: 1,500 mm, Side wall height: 600 mm, Cutting Force: 8,500 kN, Cutting width: 950 mm, Maximum Cutting Height: 650 mm, Blade Angle: 12°, Schnitt pro Minute: approx. 5–6, Cut Length: variable, infinitely adjustable, Hold-Down Cylinder: 2,450 kN, Hold-Down Stroke: 850 mm, Lid Opening: 90°, Pusher Cylinder: 2,000 kN, Hourly Throughput: approx. 18–32 t/h, Steel plate: 80 x 800 mm, Profiles: NP 600, Shafts: 140 mm, Square material: 130 mm
bushing cut-off diameter range 8-13,5 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 127 mm shaft length under head 95 mm output - pieces/min 185 max. thread length 85 mm dia. of bolt M12
Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer of gearbox: Bonfiglioli type MVF 49/F -Speed: 50 rpm i= 28 -Manufacturer Motor elsto ES FC 80M4A-40 -Power: 0.55 kW -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 375/200/H210 mm -Weight: 12.1 kg
Key data: 1500 kN, 291 g/PS, 45 mm
Arburg 470C-1500-800 Injection moulding machine with conveyor belt and sprue picker (257) Year of production: 2005 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1500 Gap spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 44,9 Working time [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot connection: Euro 12 Feed hopper: NO
This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details.
gebr. Carpentry machine - tenon cutter REX ZA-800 S YOC 1989 Total connected load: 17.4 kW Cross-cut saws: Motor power: 5.5 kW can be swivelled +/- 60° on both sides Side adjustment by handwheel - travel 350 mm Max. saw blade diameter: 800 mm Max. cutting height: 315 mm Suction connection: 120 + 80 mm Cutting Saw - Slotting Unit: Motor power: 9.0 kW Swivels forward 45° Height adjustment by handwheel - travel 160 mm Max. saw blade diameter: 500 mm Max. slot depth: 215 mm Extraction connection: 140 mm Settling circular saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forwards up to 45° Additional double swivel (forward + backward) of the individual settling saws by +/- 30° possible Max. saw blade diameter: 450 mm Max. cutting depth: 160 mm Extraction connection: 2 x 60 mm Sliding table: Hinge can be swivelled up to ...
Screw diameter: 90 mm Injectable volume: 2740 cm3 Injection pressure, : 1920 bar Column passage: 1025 x 935 mm Shutter control 4 cores Robot interface 2 blow guns
Heidenhain LS 106 C 840 mm 275 069 19 + AE 10C
Automatic motor spindle lathe: Tornos Type / Model: MultiAlpha 8x20 Condition: used Year of Make: 2008 Machine hours: 45017 h Technical data Capacities & Travel Distances Bar passage (round material) up to max. 22 mm (with turned rods up to max. 25 mm) Workpiece length max. 100 mm Longitudinal travel (Z-axis) 80 mm Cross slide path (X-axis) 50 mm End units (longitudinal slide) 200 mm Spindle & Axes Main spindle 8 independently driven motor spindles Sub-spindle one sub-spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axles 34 axles Tool slide 7 Cross slide X/Y (position 1 - 7) 1 parting carriage X (position 8) 7 longitudinal slides (positions 1- 7) Drive power & speeds Main spindle speed 0 - 8,000 1/min Power main spindle motor 11.2 kW Torque main spindle 17Nm (optionally up to 25 Nm) Speed of sub-spindle max. 8,000 1/ ...
This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a Heidenhain 426 control and has a spindle speed of 6000 RPM, along with 30 tool places. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details.
General SKU098N558 MakeLödige TypeFKM-8000D No.4546 (vessel no. 404) Year of construction1968 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8000 Ltr. Motor33 KW Specified Features - Powder turbo mixer Paddle dryer(1x) Capacity8000 l Trough sizesdia. 1580 x 4000 mm Inletdia. 500mm + dia. 400mm + dia. 200mm Outletdia. 150 mm With jacket(550 l) Max. temperature215°C Motor33 kW, 500 Volt Speed mixing shaft± 23 rpm With jacketcheck Powder turbo mixers MaterialStainless steel 1.4541 (321) General Floorspace6,8 x 1,9 m Total height2,6 m Extra SpecificationsTop connections dia. 500 mm + dia. 400 mm + dia. 200 mmFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarPowder turbo mixersAnimal feedOther feedConfectionery ...
This 4-axis Bridgeport VCM 800-30 was manufactured in 2004. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a NIKKEN 4th Axis Rotary Table and a HEIDENHAIN 530 Control, along with a BT40 Spindle Holder and 30 tool positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VCM 800-30 vertical machining centre we have for sale. Contact us for further details.
Hang 87F 3-Head Eyeletter with Extraction - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hang 87F 3-Head Eyeletter with Extraction Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hang 87F 3-Head Eyeletter with Extraction Price: 4750 EUR Download PDF Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat ...
This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 426 control and offers 30 tool positions, along with a BT40 spindle holder. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details.
Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Price: 10500 EUR Download PDF Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation ...
Complete Concrete Block Production Plant Manufacturer Zeniht Type 860 Complete carousel system with lifting ladder, countersunk ladder, drying chamber, vehicle group with turntable, complete dry side packer Strapping equipment, underlay boards. Equipment parts can also be purchased individually. More information Machine list Pictures Price on request
Die cutting machine ML-800 NXL with hot plate - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Die cutting machine ML-800 NXL with hot plate Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Die cutting machine ML-800 NXL with hot plate Price: 12600 EUR Download PDF Die cutting machine ML-800 NXL with hot plate The machine is used to cut shapes from the mold (die) of materials ie paper, cardboard, leather, plastics etc. Factory-new machine. This is the heaviest model in this format, accurate. This model is additionally equipped with a heating plate used to cut plastics so-called hot knife. T ...
TYMC-800 Honeycomb Hot Foil Stamping Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl TYMC-800 Honeycomb Hot Foil Stamping Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines TYMC-800 Honeycomb Hot Foil Stamping Machine Price: 17500 EUR Download PDF TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weig ...
Die cutting machine ML-800 NXL - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Die cutting machine ML-800 NXL Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Die cutting machine ML-800 NXL Price: 11000 EUR Download PDF Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: – Electromagnetic clutch and brake – Quick assembly frame – 3 modes: continuous, with time delay, manual – Central lubrication – additional safety cover – Tools and instructi ...
Robust 800 Roll-to-Sheet Slitter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Robust 800 Roll-to-Sheet Slitter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Robust 800 Roll-to-Sheet Slitter Price: 10000 EUR Download PDF Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: ...
Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., , Type of Machine: Butter Packaging Machine, Capacity: ± 600 Kg/h, Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height, Weight: 250 grams, Machine Weight: 840 kg, Packaging type: Aluminium and Parchment Paper , Motor power: 1,5 kW
Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible.
General SKULY006 MakeCOMI CONDOR S.p.A. TypeHX/L 1250/800 (Horizontal Axis Peeler Centrifuge) Main Features MaterialStainless steel Motor90 KW Inlet diameter80 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity426 l. Basket sizesø 1250 x 800 mm Max. loading weight596 kg Hydraulic drivecheck With hydraulic unit3kW Motor90 kW 3x400 V With variable speed drivecheck Max. basket speed1300 rpm With feeding screwcheck Motor4 kW 3x400 V With scraper(peeling/scraper knife, tungsten carbide removable blade) Hydraulic operatedcheck With hydraulic unitcheck InletDN80 Solids outletDN250 Liquid outletDN150 MaterialStainless steel 1.4462 (Duplex2205) General Year of construction2023 Mounted on framecheck Mounted on foundation platecheck With switchcheck With switchgear(as is) Weight20 000 kgBiotechnologyPeeling centrifugesCatalysts & fillersFee ...
sliding headstock CNC lathe, year 2014, CNC 840D. Used machine. More info & price on IndustrialBuyer.
We offer you an MB Atego 818 with a three-way tipper body made by Junge from a current disposal. Year of Make: 2017 Registration date: 26.01.2018 Condition: see pictures KM.: estimated 160,000 Asking price: VHB Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727 3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 64832 Babenhausen The sale is without warranty Subject to prior sale
used
Dieses originale Bosch Proportional-Wegeventile stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise. Hersteller: Bosch Teilenummer: - Type: B 810 006 205 / B810006205 Proportional-Wegeventile Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 38306323
used
Dieses originale Bosch Proportional-Wegeventile stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise. Hersteller: Bosch Teilenummer: - Type: 0 811 402 073 / 0811402073 Proportional-Wegeventile Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 38306223
used
Dieses originale Bosch Staudruckventil stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise. Hersteller: Bosch Teilenummer: - Type: 0 811 402 163 / 0811402163 Staudruckventil Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 38096423
maximum number of results exceeded
please refine your search
