ft 8 used for sale

cutting diameter: 810 mm saw band length: 8200 mm cutting width: mm Control: total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4020 x1630 x 2570 mm Brand: BMSY Type: 810 CGH Year of make: 2019 Capacity round 45º: 555 mm ø Capacity round 60º: 320 mm ø Capacity round 90º: 810 mm ø Capacity square 45º: 700 mm Capacity square 60º: 310 mm Capacity square 90º: 770 mm Capacity rectangular 45º: 555 x 770 mm Capacity rectangular 60º: 310 x 770 mm Capacity rectangular 90º: 810 x 770 mm Mitre: 60 ° Saw blade dimension: 8.200 x 41 x 1,3 mm Saw speed: 20 - 100 m/min Saw motor: 4 kW Machine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mm Machine weight: 3.970 kg Cap. 30 ° round: 700 mm ø Cap. 30 ° straight: 700 x 770 mm Cap. 30 ° square: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BÜHLER MPAD 814 Plansifter Power 3 kw Pendulum shaft drive, flat belt approx. 80 replacement screens (9 x new) good, ready-to-use condition

MAK 8M32 Crankshaft for sale Used Standart size In our stock in Istanbul Turkey Please contact: info@fin-marine

5BBL /800L Working Capacity Fermenting Vessel - stainless steel. Specification: Vessel = T 160 FV Gross Capacity 6 Barrels 220 Gallons 1000 Litres Material Stainless Steel – Grade 316 (1.44040) Description: Vertical stainless steel vessel, dished top and dished base. Free standing on 3-legs with adjustable feet. Fitted on the shell with a stainless steel Jacket, this is a low pressure open system jacket. Insulated on the shell in 50mm mineral wool insulation. Clad on the shell in bright polished, riveted stainless steel. Fittings: 1 x Top Manway Dia. 400m 1 x 1” RJT Feed to Dia.64 180° up pattern Spray Ball 1 x 120mm Dia, Viewing Glass 1 x 1½ RJT outlet with butterfly valve 2 x 1” BSP Male Inlet / Outlet to Jacket 1 x Temp pocket This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at ...

Used Flottweg B-800 double-belt press (PD6000). New: 2015 Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linea ...

Key data: 1000 kg, 6800

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module,  ...

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 25800 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 7 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 196 Scope of Delivery 08 x Stand 10300 x 1100 mm galvanised 84 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded  ...

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Linear cooler for donats/pastries/cakes etc. Linear cooler, consisting of the following components: - Conveyor belt with drive - Insulating housing - Evaporators and others - Refrigeration technology - Control cabinet Geometric specifications External dimensions Length: approx. 7,800 mm Width: approx. 1,800 mm plus control cabinet Height: approx. 2,400 mm plus valve station Inlet height: approx. 880 mm Spout height: approx. 1,030 mm Technical performance data using the following example: Nougat Donut (Master) Product weight: approx. 80 g Product size (Ø x H) approx. 100 x 35 mm Processing capacity: 320 kg/h = 4,000 pcs/h Throughput time: approx. 3.5 min, adjustable Power connection: 400 V, 3 Ph, 50 Hz Total power requirement: 30 kW Radiator dimensions (LxWxH): 7,800 x 1,800 x 2,400 mm Condition: well-maintained, fully functional Availability: immed ...

Machine light, machine light, work area light, system light, compact light -Manufacturer: Rittal, LED system light SZ 4140.840 -Price: per piece -Numer: 3 pieces -Dimensions: 525/50/H30 mm -Weight: 0.4 kg/piece

Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch, Router, Ethernet Security Router -Cisco: 881 Ethernet Security Router -Dimesinons: 250/320H45 mm -Weight: 2,4 kg

Relay, contactor, semiconductor contactor, contactor -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) -Weight 0.1 kg/piece

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

Balancing valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M28/PCN 805 793 -Connection: 28 mm -Price: per piece -Number: 4 piece -Dimension package: 255/90/H90 mm -Weight: 1.1 kg/piece

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm -Weight: 0.2 kg/piece

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

Workbench, work table, assembly bench, electrician workbench -without: vise -with: Electrician test board -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Quantity: 5 pieces available -Price: per piece -Weight: 110 kg

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

3.6kW 3000m³/h 4200 PA as good as new

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic data cable -Type: Unitronic LiYCY 8x2x0.5 ROHS -Length: 75 m -Price: complete -Dimensions roll: Ø 700 x 490 mm -Weight: 36 kg

Wire electrode, welding wire, welding wire -Material: stainless steel -Manufacturer: Eurotrode, started roll of shielding gas wire electrode -Type: M 8820 1.4829 Ø 1.2 mm -Dimensions: Ø 300 / 100 mm -Weight roll: 5.1 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 820 mm -Width: 15 mm/height: 58 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 1.8 kg

Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125B/M -Stroke: 320 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: see drawing in the pictures -Dimensions: 835/142/H150 mm -Weight: 20 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125 B -Stroke: 500 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: 880/140/140 mm -Weight: 23 kg

table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

Control cabinet, distribution cabinet, control cabinet TS modular cabinet -Dimensions: W360/H360/D90 mm -Manufacturer steel version: 8142/13 -Weight: 3.4 kg

Pneumatic cylinder, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 80 mm -Piston rod: Ø 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 555/95/H95 mm -Weight: 5.3 kg/piece

Spare parts for the cleaning system HAMO / Amsonic, type T-840 consisting of the following parts: - Feeding transformers - Parvalux gear motors - Diaphragm pumps & valves - Drain valves - Pressure pipes - Level switch - Dosing pumps - Flow meter - PH probes - Conductivity transmitter

BENHIL BUTTER PACKER MODEL : 8311 FORMAT : 250grams Capacity : 40pcs/min Hopper Feed Condition : Fully Refurbished

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 700 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 920/95/H95 mm -Weight: 9.45 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 483/53/H53 mm -Weight: 1.85 kg

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 425 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimensions: 565/30/H30 mm -Weight: 0.95 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 825/95/H95 mm -Weight: 10.7 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 3 pieces -Dimensions: 250/65/H65 mm -Weight: 1.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/65/H65 mm -Weight: 2.05 kg/piece

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Control: Siemens 840D Shopmill Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 14 Z - Travel mm: 510 Y - Travel mm: 510 X - Travel mm: 835 Rapid traverse m/min: 30 Tool holder: SK 40 Table load: 800 kg Clamping surface mm: 1,000 x 560 Base area of the machine mm: 2,100 x 2,700 Machine weight approx. kg: 4,200 Linear scales Axis A Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy SPINDLE BEARINGS NEW!

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)