fs used for sale

Power consumption: 20kWh, compressed air supply: 6bar, connected load: 22kVA, with documentation.

Filter tape rakes

Manufacturer: FST Type: DFX 18 Year of construction: 2017 Compressed air: 14 bar Minimum temperature compressed air: 14°C Maximum compressed air temperature: 55°C Refrigerant: R134.a 0.42 kg Minmal temperature refrigerant: -10°C Maximum temperature refrigerant: 120°C

Chip Conveyor

S. No.: 238828

Multi-bag filter in 316 L stainless steel. Total filtering surface 5.76 m2 Equipped with 12 U bag support baskets in 316 perforated ion. Filter element 12 bags size 20 Volume 735 L Weight: 380 Kg Bag type: 12 PO 31 C Maximum recommended flow rate: 480 m3/h Inlet / outlet diameter : 250 mm Max temperature : 100?C Max pressure : 6 bar at 100?C Downstream depressurisation: tube with valve diameter 25 Downstream draining diameter: smooth tube diameter 40 Quick and easy opening Available units: x2. Each filter is sold with new bags.

Profibus Y-piece, 2-way distribution system, 2 pieces TURCK VB2-FSW/FKW/FSW-45 U0095-2 12 MBit/s New ! Dimensions ( single Y-piece ): 62 x 38 x 20 mm

- Frässpindel schwenkbar von -90C bis +45C nach hinten - Graugusstisch 1000 x 650 mm - Spindel FI 30 mm - Spindellänge 180 mm - max. Werkzeug FI 300 mm - Motor polumschaltbar 4,5 / 5,5 kW / 400 V - Drehzahlen 3000/4000/5000/6000/8000/10000 U/min - auswechselbare Frässpindel MK 4 - Rechts-Linkslauf - Spezial - Integralanschlag - elektrische Drehzahlanzeige - Fräsanschlag mit Niederhaltersystem - Alu-Schiebetisch breite 350 mm - Ausleger mit Anschlag, Exzenterspanner - Handräder bedienfreundlich an der Frontseite - Absaugstutzen 2 x FI 120 mm - AbmessungenL=1750, B=1300, H=1150 mm - Gewicht 600 kg

Klopp FS11 milling machine Specifications: x-travel: 700 mm Y-travel: 350 mm z-travel: 450 mm Table size: 1100 x 300 mm Spindle speeds: 31.5 - 1400 rpm Feeds - longitudinal and transverse 12.5 - 630 mm/min Rapid traverse longitudinal and transverse: 2500 m/min Feed range - vertical: 1250mm/min Spindle mount: SK 40 Total power requirement: 7 KW Machine weight: approx. 2.2 t Space requirements: approx. 1.6 x 1.8 x 1.8 m Built in 1974

RS485 Fail-Save Termination FELD-AUTOMATION FST485-230 Supply voltage: 230 V AC Output voltage: 5 V DC new ! Dimensions: 90 x 18 x 60 mm

Crane remote control, receiver HBC RADIOMATIC FSE 716 ( FSE716 ) Supply voltage: 48 V AC frequency: 433.100 - 434.75 MHz IP 55 with approx. 2.0 m connection cable used, tested ! Dimensions: 400 x 400 x 130 mm

Grippers, drum grippers NEUMANN FSP K 1-36 H / SO load capacity: 360 kg Material: stainless steel ( 1.4301 ) Crane eye: Ø 56 mm, cross-section: 22 x 8 mm used, tested ! Dimensions: 800 x 640 x 310 mm

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

200.0 kW, max. 7.50 bar, 35.71 m3 rpm, built 1991, New screw in 1997 at 53000 operating hours. Engine: 380V/50Hz, 460V/60Hz

200,0 kW, max. 7,50 bar, 35,71 m3/min, Year 1991,new air end in 1997 with 53000 hours. Motor: 380V/50Hz, 460V/60Hz

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Type: 100 FSG, built: 1986, gas operated granulating rig, spray granulator with two media nozzle, separator, heat exchanger (Manufacturer: Ohl), blowback filter K 6 R (2,4 m²), dosing unit for adding seeds. Mint condition.

315 kW, max. 12.0 bar, 46.40 m3/min. condition as new.

315 kW, max. 12,0 bar, 46,40 m3/min. Condition like new.

UTS Separator FSP B-78/15 Bedding-Technical Data Sheet Dimensions/Weight: length mm 2743 width mm 711 Height mm 980 Weight (empty) kg 770 Weight (in operation) kg approx. 850 Schnecke: Material Stainless St./tungsten Carbide Coating Length of auger mm 1160 Active length mm 1099 Screens: Pitch mm 200 Material stainless steel Helix diameter mm 260 length filter screen F mm 520 Helix thickness mm 10 length filter screen FXX mm 260 Number of Helixes 2 length press screen mm 150 Inlet Housing: Diameter screens mm 260 Material Spheroidal cast iron EN-GJS-400-15 screen surface area m2 0.72 Diameter inlet pipe connection mm 100/102 Drive adapter: Dimens. Maintenance opening mm 160 x 220 Material St. Steel/housing Mild steel painted Screen Housing: Bearing 2 taper roller bearings Material Spheroidal cast iron EN-GJS-400-15 sealing system mechanical seal, grease Chamber Lengt ...

Robopac film stretching machinePlatform Ø1500 mmMax pallet size 1200x1200 mm.Max load 1500 kg.Max height 2200 mm.Includes ramp for climbing the machine (height 50 mm.)

Flange ball valve ball valve Böhmer DN600 DN 600 PN16 Naturist FSK 016.600 ball valve lanschkugelhahn / ball valve Manufacturer: Böhmer DN 600 PN 16 Model: Naturist FSK 016.600 Year of construction: 2006 NEW, from stock reversal

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

Compressed air screw compressor Kaeser FSD 571 315 kW, 12 bar, 46.40 m3/min

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Rotary screw air compressor Kaeser FSD 571 315 kW, 12 bar, 46,40 m3/min

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

Vertical console milling machine make HECKERT type FSS 315 SMachine -No: 314212/2 Year 1992Table longitudinal path X-axis: 950 mmKonseol vertical path Y-axis: 450 mmTransverse Z-axis: 500 mmCross slide cross travel: 270 mmTable size W x L: 430 x 1600 mmNumber of clamping stages: 4Table load: 1000 kgSpindle mount: ISA 4018 speeds: 28 - 1400 rpm.18 feeds lengthwise: 16 - 800 mm / minxa0xa0xa0 vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minDrive power: 1.5 kWConnected load: 8.0 kWDimensions: 2800 x 2800 x 1995 mmWeight approx: 3000 kgWith- swivel spindle head- tableau control- Control cabinet SIEMENS- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Manual Blistering Machine TOMMY NIELSEN 501 FSX Year: 11-12-2009 CE Marked: YES Model: 501 FSX Voltage: 3x400/230V Frequency: 50 Hz kW: 3.5kW Bar: 7.0 Serial No: 20091102 Format: -11.8cm x 27.5cm -19 cm x 27.5 cm -2x (11.5cm x 12.2cm) below Price: 12500 eur (FOB)

Kaeser used machine power: 200 KW volume flow: 36,52 m3/min pressure: 7,5KW 1997 year

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offe ...

Measuring range of 200-250mm Original packaging

Kaeser user machine power200KW volume flow:36,52m3/min. pressure:7,5 bar

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse  ...

Off-road scissor lift - work platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport Dimensions: 2.27 m x 0.96 m Height: 2.14 m Railing folded down height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Supports can be folded in bright non-marking chains. Climbing ability up to: 30° Overload cut-off: Powered by battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and conditions on ...

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

TERSA planer shaft, table opening to the rear, helical toothed feed roller, noise-insulated, dust-tested---------- Technical data ---------- planing width: 300 mm, table length: 1,500 mm, max. chip removal: 3 mm, diameter planing shaft: 72 mm, number of knives: 3 pieces, swivel range dressing stop: 45, passage height: 230 mm, min . workpiece thickness: 3 mm, min. workpiece length: 300 mm, suction nozzle: 120 mm, weight: 264 kg TOP condition! Workshop-tested & immediately ready for use Quality - Info: - Dressing tables adjusted- Feed and pull-out rollers checked and adjusted- Table guides checked - Complete basic inspection - Complete basic cleaning- Electrics checked - Immediately ready for use

wire diameter 0,2-2,5 mm spring diameter 35 mm feeding length 1500 mm