front used for sale

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

3 MONTHS WARRANTY Offer consists of: - Gathering tower VAC-100a - Gathering tower VAC-100c - Staple and folding SPF-20A - Front cutter FC-20A Horizon VAC-100a / Horizon VAC-100c Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air collection tower - Number of stations: 10 per gathering tower - Error avoidance: error, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - Selective gathering - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Charging capacity: 55mm/station - Capacity: up to 9,500 sets/h - Electricity: 230V/50Hz - 1.86kW - Dimensions: 842x652x1.961mm - Weight: 310kg Horizon SPF-20A Staple and fo ...

Offer consists of: - Gathering tower MC-80a - Staple and folding SPF-11 - Front cutter FC-11 Horizon MC-80a Suction Air Gathering Machine - Model: Suction and blowing air collection tower - Number of stations: 8 per gathering tower - Error avoidance: error, double-blade and jam control - Expandable to 6 towers (48 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Selective gathering -Format: max. 740x318mm; min. 160x110mm - Paper weight: 50-260g/sqm - Charging capacity: 50mm/ station - Capacity: up to 5,100 sets/h - Electricity: 400V; 50Hz - 1.86kW - Weight: 229kg - Dimensions: 660x810x1,660mm Horizon SPF-11 Staple and folding unit: - Format setting: manual - Staple heads: 2 Expandable to 4 stitching heads - Stitching options: backstitch, block stitching, corner stitching - Eyelet stitchin ...

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

• Labelling of folding boxes • 3 label dispensers for front / rear and top • Output max. 300 objects/min • Object height max. 100 mm • Width of conveyor belt max. 240 mm • Belt travel from left to right • Label roll Ø max. 400 mm • Label height max. 100 mm • 3 Label dispenser HERMA H400 PPS 8R / 8L / 8L • Product orientation in infeed • Overfeed conveyor • Label position check with sensors for front / rear labels • Label seat monitoring with camera for label presence at top • Bad ejection • PLC control Siemens S7-300 with Simatic Multipanel, • Drive 400V/50Hz/12A • Air connection 5-6 bar

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display - manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?m ...

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camer ...

Material Configuration R186132210 Size 125 Type FNS - Flange,Normal,Standard Preload Class C2 - Medium Preload Accuracy Class P - Precision Gasket SS - Standard Version CS - Carbon steel Lubrication 02 - Preserved Lubrication connection (loose) SL - straight grease nipple Attachment element left (AK front) 000 - without attachment element Endsheet element right. (AK front) 000 - without attachment element Carbon steel Size 125 C2 = preload 8 % C Accuracy class P Conserved Flange Normal Standard Height Standard without basic lubrication

Offer 23395 Specifications: - max. working width 2540 mm - max. cutting capacity St 40 6.35 mm - Cutting angle adjustable mot. 0,5 - 2,5 ° - Cutting gap adjustment 0.05 - 0.8 mm - Number of hydraulic hold-downs 14 pcs -Mot. Backgauge with positioning control ELGO 10 - 1000 mm - Front angle stop 1000 mm - Stroke rate depending on cutting angle and cutting length 13 - 50 per/min - Hydraulic drive 400 V / 7.5 kW - Table height approx. 770 mm - Space requirements incl. back gauge, without front support arms -ca. W 3350 x H 1950 x D 2200 mm - Weight approx. 4700 kg - with: - Cutting depth adjustment - Cutting line illumination - E-foot switch

Wire reel, willow wire reel, barbed wire winder, wire winder, wire winding machine, Electric fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -the device could with corresponding recording with front loader or Three-point hitch can be used -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 400 x 30 mm capacity 90 degrees: flat: 345 x 70 mm capacity 90 degrees: square: 140 x 140 mm capacity 45 degrees: flat: 280 x 30 mm capacity 45 degrees: flat: 240 x 70 mm stroke: 240 mm saw blade turning speeds: 6 / 12 / 24 / 48 n/min work height max.: 1000 mm engine output: 3,0 / 3,6 kW weight of the machine ca.: 1150 kg range L-W-H: 1000 x 1330 x 1860 mm Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages  ...

sheet width: 2100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 11 Stk no. of strokes: 28 Hub/min oil volume: 150 l total power requirement: 11 kW dimensions of the machine ca.: 3010 x 2100 x 1640 mm weight: 4500 kg Available from stock -------------------------------------------------- --------- electrical / hydraulic CNC swing cutting shear with CYBELEC CNC touch screen control with electric / hydr. Cutting gap adjustment -------------------------------------------------- --------- Furnishing: - CNC electrical / hydraulic swing cutting shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material selection, including sheet thickness Cutting line lighting - motorized back gauge, travel = 1,000 mm (X axis) on ball screws automatic Can be  ...

pressure: 60.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 255 mm stroke: 165 mm dayligth: 360 mm table height: 890 mm ajustment speed: 85.0 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 100 ltr. total power requirement: 4,0 kW weight: 4600 kg range L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition () Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms  ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

We sell due to inactivity MEP band saw - Semi-automatic - Year of construction 2021 - used to make 50 cuts - The machine is new as shown in the published photos - Machinery Complies with the EEC MACHINERY DIRECTIVE 2006/42/EC - EN 16093:2017 and DIRECTIVE 2014/30/UE EMC - EN 50370 - 1:2005 Emission - EN 50370 - 2:2003 Immunity Machine designed for metal cutting MANUFACTURER MEP S.p.A. EXTRAORDINARY EFFICIENCY AND FLEXIBILITY > The automatic alignment of the guide head of the front blade in relation to the dimensions of the bars to be cut reduces the setting times of the saw. > The interdependence between the cutting jaw and the vertical support of the front blade guide head allows the reduction of the setting times of the saw, allowing its automatic positioning according to the section to be cut. > The hydraulic clamping system with double clamping of the part guarante ...

Colgar guillotine shear - Year of construction 1975 in perfect working order complete with n. 2 pairs of Busch blades, n. 2 Front extensions, n. 1 front team, n. 1 row on the pallet. Complete cutting wire lighting. Table with rollers for support and unloading. Rear register mm. 750 motorized with shot counter. Electrical system. Lubrication system. Electric current operation V. 380/50 Hz. Maximum sheet cutting capacity mm. 4/5. Machine made up to standard.

We have used Baykal HNC 8116 CNC hydraulic guillotine shears for sale. The shears have a cutting length of 8060mm and the maximum sheet thickness is 16mm The machine was purchased as new and has been working with us since 2014. During this period, the machine was not very usable, we mostly used it to cut sheets with a thickness of 3-8 mm. The meter reading is 3515h Below are some basic information • Welded steel structure providing the necessary rigidity and durability • CYBELEC CNC control with the possibility of programming the bumper, the number of cuts, the cutting angle, the gap between the blades; • Motorized rear bumper driven by a ball screw with a tilting function to enable the cutting of oversized sheets • Protection of the operators fingers from the front of the machine • 1000 mm long front supports • Side recess in the 350 mm frame †...

AMADA, model HFT 220-3 (220 tons, 3340 mm bending length). Machine from 2003, purchased in 2004, very good condition for the year, serviced, has its power, no leaks. The machine has, among others: - Laser Safe operator safety system - modified hydraulic control to digital - new hydraulic oil and filters - 4 movable bumper fingers in the Z axis (rare configuration) - controlled CNC axes: Y1, Y2, X, R - instruction manual in Polish - lighting of the working field with LED lamps (front and center) - 230 V AC sockets at the back of the machine (2 pcs.) - serviced control box - replaced computer and PLC cooling - a set of tools visible in the picture sheet 6-8 mm few hours Accessories included (4 x 835 mm tool kit, front rests, clamps).

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 2.0 ° down holder: 14 Stück no. of strokes: 13 - 18 Hub/min back stop - adjustable: 1000 mm Control: ELGO P40T column arm: 250 mm oil volume: 265 l engine output: 22,0 kW weight: 9600 kg range L-W-H: 4700 x 2300 x 2200 mm New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears oscillating cut - ELGO NC control - model P40T Touch, front left control panel - CNC electro-motorized back gauge, with ball screws including retraction function selectable Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSL ...

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm Machine in good / well-maintained condition () Furnishing: - DELEM CNC control - model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPA ...

Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

pressure: 180 t chamfer lenght: 3700 mm distance between columns: 3250 mm throat: 270 mm stroke: 220 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 395 mm table width: 200 mm work height max.: 870 mm oil volume: 210 ltr. total power requirement: 15,0 kW weight of the machine ca.: 12100 kg. range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop () Furnishing: - conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V u ...

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

: neu : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 17050 € : 349.53 € : 1 : 1250 mm : 1.25 mm : 1,25 mm bei 1 Messerpaar, : 2 Stk. : 0.37 kW : 36 m/min : 70 mm : 1900 mm : 1600 mm : 1000 mm : 350 kg 3 PAIRS OF BLADES Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN Options: Additional pair of blades € 510,- Additional cutting unit € 1.120,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm

Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainles ...

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

ID2983 MBU G4 approx. 2770 hours/hours 6.2 t Grader, with front and middle share Grader, with front and centre coulter

ID3114 JCB Fastrac 185-65 year/Year of construction 1995 6300 hours/hours Tractor, front and rear PTO and hydraulic connections, with voltage converter, new hydraulic pump Tractor, front and rear PTO and hydraulic connections, with voltage transformer, new hydraulic pump

pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 410 mm table width: 100 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 215 mm tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 385 mm oil volume: 80.0 L travel -x axis: 500 X-Weg mm traversing speed: 300 R-Weg mm compressed air: 6.0 bar Number of working hours: 24.000 h control: DELEM total power requirement: 8.0 KVA weight of the machine ca.: 4750 kg. range L-W-H: 2000 x 2000 x 2380 mm Machine with only approx. 24.000 operating hours () all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled hei ...

Used Linear Labeler PackLab Non Stop 2019 Built in 2019 Very little used therefore kept in excellent condition Nonstop function with two groups of wrapping labels Flexible self adhesive linear labeler for wrapping label application front and back Suitable for applying partial or wrap around body labels on cylindrical containers and partial front and back labels on shaped containers Achieves a production of 220 jars per minute therefore over 13 000 jars per hour Base with external labeling stations to give the operator more accessibility both during the work phases and during the format change N 2 labeling stations for each label to be applied with automatic interchange in the presence of end of reel breaking of backing paper lack of a label on the reel PLC type is Schneider with 5 inch touch screen The wrapping belts are motorized with speed regulation and with an encoder connected to th ...

Used Casepacking Monoblock Oma 2007 This machine is an OMA Monoblock composed of a case erector and case packer Oma brand case erector with hot glue closure Nordson glue heater Vertical cardboard formation Form 2 cartons of 6 or 1 of 12 with or without the hive inside Case packer with mechanical movement Possibility of forming and packing various carton formats Painted iron frame Accident prevention protections Production about 320 boxes of 12 and about 600 of 6 The machine is in accordance with CE 2007 with manuals In excellent condition Dimensions The machine is divided into 2 parts The first part forms and closes the bottom part of the cardboard with hot glue Front 2 500 mm Width 2 100mm Height 2 500mm Weight about 700 kg The second part for cartoning machine Front 2 000 mm Width 1 900mm Height 2 700mm Weight about 900 kg [...for more information send your inquiry to the seller.] refn ...

Used Complete Line Eurostar up to 1500 bph A Technical Analysis Introduction Initialy the innovative used Eurostar complete line capable of producing up to 1500 bottles per hour bph represents a cutting edge technological solution in the bottling industry This system currently in production stands out for its versatility and efficiency in handling different formats and types of products Operational Conditions and Capacity Moreover the used Eurostar line is in operational condition and actively employed in production With a speed of 1500 bph this line is optimized to handle glass containers of various capacities 0 25 L 0 35 L 0 50 L and 1 0 L Its versatility is further highlighted by its ability to process a variety of products such as soft drinks sparkling water and still water Isobaric Filling Technology Additionally a key element of the Eurostar line is its isobaric filling system This ...

Flail mower rear attachment cat. I and II, for PTO drive 540 rpm, consisting of 2 x 125 cm flail mower, foldable left and right, mowing width approx. 350 cm in connection with front mower (not included!), otherwise approx. 100 cm remain unprocessed in the middle. Little-used machine from public Hand, built in 2009. Various front mowers and other mowing technology in stock - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

sheet width: 4100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 18 Stück no. of strokes: 15 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC Cybtouch back stop - adjustable: 1000 mm work height max.: 800 mm engine output: 11,0 kW weight: 8.100 kg. range L-W-H: 5000 x 2410 x 1650 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. C ...

Paint Booth Drying Booth Paint Spraying System Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bolted steel construction with sandwich panels Room volume: approx. 150 m³ 2 exhaust walls on the front side as well as supply air ceiling with 4 fields 4 explosion-proof luminaires on each side, 4 fluorescent tubes each Front fully openable with segment door Lid of the cab can be opened in the middle to the entrance with overhead travelling crane 2 entrance doors on the side complete with control cabinet Extraction motors, etc. Heating system for heating the supply air Airless Sprayer

sheet width: 3200 mm plate thickness: 0.5 - 6.0 mm cutting angle: 1° 30 ° no. of strokes: 14 Hub/min back stop - adjustable: max. 1000 mm down holder: 13 Stück work height max.: 800 mm Control: EASY-VIEW oil volume: 270 l voltage: 400 V engine output: 7.5 kW weight: 6100 kg range L-W-H: 4010 x 1610 x 1620 mm from a maintenance workshop - good condition () was only used sporadically according to the previous seller New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH EASY-VIEW touch CNC positioning control Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of ...

turning diameter: max. 300 mm max. workpiece length: 480 mm control: Sinumerik 840D Siemens greates pass round over bed: 430 mm Swing dia. over traverse guideway: 300 mm distance between spindles: 720 mm Main spindle:: turning speed range - main spindle: 0 - 6.300 min/-1 power capacity - main spindel: 8 / 13 kW max. Torque: 78 Nm spindle head: KK5 DIN 55026 spindle diameter in front bearing: 80 mm bar material dia.: max. 45 mm C-Axis: 0,001 ° max. chucking diameter: 160 mm Subspindle:: Spindle speed range subspindle: 0 - 6.300 min/-1 power capacity - Sub spindle: 7 / 10 kW max. Torque: 42 Nm spindle head: KK4 DIN 55026 spindle diameter in front bearing: 70 mm max. chucking diameter: 130 mm Traverses Subspindle: 510 mm axis stroke:: x-axis: 160 mm y-axis: +40 / -30 mm z-axis: 510 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 25 Drill shank diameter: 25 mm Spindle speed ...

Description: Ceccato CSC 40 screw air compressor (under brand of Atlas Copco ) Technical data: max. working pressure : 8 bars free air delivery at reference conditions : 5400 m3/h working hours in total : approx. 35000 hrs. working hours under load: approx. 18000 hrs. rated power : 30 kW ATLAS COPCO airend! dimensions: (LxWxH) : 1247x1060x1630 weight : 695 Please also take a look of video of the machine! Other features: CSC 40 compressor is compact, easy to install, solid, they have great performance and last but not least, they need very low maintenance. Accessibility of all components makes service and cleaning very easy. Without any doubt the best choice for strong, carefree and economical compressed air throughout your workplace. Key Benefits: DRD 75 IVR DRY outstanding, first-class components compact design all service components located at the front for excellent ac ...

Cutting line with front disc Ø 500 mm. The system, fully driven by numerical control, produces cut-to-length pieces by means of a bar loader and a cut-off machine with front disc exit. Composition of the plant: - LT 500 cross-cut saw - Step In S - Mobile bar loading magazine - Push Plus 7000 - Numerical control bar loader. - Unloading Area (Step Out/Plane Out) - Control Module - Protections - Label printer. In perfect condition. Currently in operation. The disassembly of the machine would be managed by the buyer.

Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major  ...

Offer 23208 Specifications: - max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - front angle stop approx. 1100 mm - 2 front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cutting line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

Description: YOM: presumable 1989 (without warranty) , travels: , X: 640 mm , Y: 410 mm , Z: 450 mm , distance between spindle centres and table surface: 200 – 650 mm , distance between ,spindle centre line and column front side: 460 mm , effective table size: 1000 x 410 mm , loading capacity: 500 kg , distance between ,table surface and floor: 750 mm , spindle taper bore: NT.40 , diameter (front bearing): 70 mm , spindle speed: 4000 rpm: , rapid traverse of X- and Y-axis: 13000 mm/min , Z-axis: 10000 mm/min , cutting feed of X-, Y- and Z-axis: 1 – 4000 mm/min , with automatic tool changer magazine capacity: 20 tools , tool shaft: BT 40 , Max. tool diameter: 102 mm , Max. tool diameter without ,neighbour tools: 152 mm , Max. tool length: 300 mm , Max. tool weight: 8  ...

pressure: 200 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 200 mm ajustment speed: 100 mm/sec working feed: 8,0 mm/sec return speed: 120 mm/sec stroke: 190 mm table height: 900 mm dayligth: 350 mm engine output: 15,0 kW oil volume: 150 ltr. Control: ELGO weight of the machine ca.: 13500 kg. range L-W-H: 4800 x 1750 x 2800 mm Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/fo ...

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel switch cabinet no.2 or no 4 or no 5, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the tr ...