front used for sale

PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 1780 mm   table surface (front-back): 1300 mm   opening in bed (left-right): 1445 mm   opening in bed (front-back): 260 mm SLIDE   slide force: 200 to   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 178 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION)   number of cushions: 11  & ...

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

CONTROLS   PLC PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 1400 mm   table surface (front-back): 800 mm SLIDE   table surface (left-right): 1000 mm   table surface (front-back): 600 mm SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   autom. Slide adjustment: yes   stroke min.: 20 mm   stroke max.: 200 mm   stroke rate (max.): 45 /min   hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 510 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V DIME ...

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

CONTROLS   PC controller BECKHOFF C 6140 PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 410 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 8 mm/s   working velocity max.: 80 mm/s   return velocity max.: 150 mm/s COUNTER RAM   nominal force: 120 to   stroke: 40 mm V-RING   nominal force: 250 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 820 mm   lower table (front-back): 1250 mm   upper table (left-right): 820 mm   upper table (front-back): 1250 mm   shut height max.: 410 mm STRIP-FE ...

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 600 mm   thickness of bolster plate: 100 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 450 mm   stroke: 500 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   return velocity max.: 250 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 800 mm   throat (C-frame): 360 mm ELECTRICAL SPECIFICATIONS   total power consumption: 20.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1250 mm ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

Cat.-No. 14-0062 in a very good condition Total Height: 1700 mm Total Length: 3750 mm Diameter: 1620 mm Height Tank Body: 1600 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection 1/2 • with Clap NW 40 • with outlet discharge DN 40 • with Angle Seat Butterfly Valve with Outlet DN 40 The price is for one tank. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cat.-No. 14-0063 in a very good condition Total Height: 1720 mm Total Length: 3600 mm Diameter: 1600 mm Height Tank Body: 1620 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection ½ • with Clap NW 40 • with outlet discharge DN 40 with outlet WKG 40 • with Angle Seat Butterfly Valve All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

Cat.-No. 16-00152 in a very good condition Measurement and Weight: Total Length: 7200 mm Cyl.Length approx. 6000 mm Diameter: 2400 mm Weight: approx. 4.550 kg Uni 6450 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Tank lining: EMS 227 Operating temperature -10/+50°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 9 mm wall thickness. Tank upper body: · 1 flange DN 25 Tank front: · with manhole oval up front 430 x 350 mm swivelling with holder · with pressure valve with manometer, with overpressure safety valve, connection DN 15 · with temperature sensor · with level indicator flanged 100 mm · with clear outlet with angle seat valve DN 50 flanged 135 mm · with agitator (380V 1,1 kW, 1400 U/min 50 Hz) flanged NW 150 mm · with rest outlet DN 50 with an ...

used approx. 4 m³ / 4000 litres polyester tank / fibreglass tank / transport tank above ground, standing at 4 feet, good condition dimensions: T = 1.80 m x W = 1.30 m x H = 2.40 m (without feet) The tank includes 4 steel feet/cones, dome on the front of the front, several in - and outlets. The container can be used as storage tank for juice, canola oil, water, liquid food, whey, potato steam skins, molasses, liquid manure, AHL, ASL, as rainwater tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site ...

Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

Replacement TFT monitor for MAHO machines with control of Philips CNC 432. Suitable for MAHO CNC 432/10 Philips control machines. Front panel aluminum black powder coated High quality anti-reflective glass Dimensions 400 x 308 mm front panel Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixel brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Operating temperature-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, contrast ratio, auto adjustment Install phase position, clock, language, reset Included accessories: power adapter, Achschlusskabel 15-pol. D-Sub 24 months warranty!

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

Storage tank outside marbled for wine, water, fruit juice, liquor content: 2,000 litres NEW! Dimensions and weight: Total diameter: 1110 mm. height: 2650 mm Cyl. Height: 1500 mm Material: V2A - AISI 304, V4A - AISI 316 surface: top shelf: V2A = 304, inside outside marbled IIID Cylinder: 304 = V2A, inside IIID, outside marbled floor: 316 = V4A, 2 B = IIIC marbled top shelf: conical bottom 1 x loading and venting connection DN50 2 x lifting eyes Cylindrical tank: 2 x Head hook 1 x manhole front oval 430 x 320 mm swivel with bracket and bracket 1 x tasting valves DN 15 (extra charge) 1 x Tauchschaftshülse for temperature display (extra charge) 1 x thermometer digital (surcharge) 1 x indicator bar with scale 1 x clear drain valve DN 50 and DN 50 (surcharge) end cap Underbody:-Conical spout flooring 1 x front drawn with valve DN 50 and DN 50 (surcharge) end cap 3 x len ...

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

Sparkling Pressure Tank / Steel Pressure Tank Storage Tank / Pressure Tank with red food safe munkadur coating, HORIZONTAL with new KIESELMANN Sparkling pressure fitting Operating pressure 8 bar Volume: 5.000 Litres Measurement and Weight: Total Length: 2800 mm Cyl. Length: 2045 mm Diameter: 1600 mm Weight: approx. 1220 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10+50°C Tank lining: EMS 277 Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms 8 mm wall thickness, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 440 x 350 mm swiveling with holder • with new KIESELMANN Sparkling pressure fitting with manome ...

Interaxle mowerdeck, RCK 40 LT, 1016 mm, unused, to Kubota T 1460. Other Kubota mowers: Interaxle mowerdeck RC-48-62F, 122 cm, unused Interaxle mowerdeck RC 54-24BEC, 137 cm, little to barely needed Interaxle mowerdeck RC 54-G20G, 137 cm, unused Interaxle mowerdeck RC 54-BG, 137 cm, used Interaxle mowerdeck RC 60-21 BG WG, 150 cm, used Front mowerdeck RC-54-F30 F, 137 cm, used Other front mowers 150 cm suitable for Kubota Mower technique also for Gutbrod, Hako, Iseki, JohnDeere, Kioti, Shibaura etc.

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Front lift, front force lifter ex Iseki TX 5390. Further hoist also in stock ex Iseki 5040, suitable 5035, 5135, 5140. Other parts available, also diesel engine with turbocharger, 28 kw. Shipping worldwide. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...

specifications: - Nominal /permanent temperature can be selected up to approx. 1150 ° - digital temperature setting - Timer - Interior size approx. W 250 x H 190 x D 400 mm - Loading by front door - Opening width of the front door B 240 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

2 Thermal VLF Systems form one place: 1. CTP machine Lotem XL 60/80 Creo, YOC 2001 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness the smallest format is 45.7 x 38.1 The software is equipped as follows: 1 x Lotem XL 60/80 Brisque 4 Impose 1 x Solder 800V transformer 1 x Brisque Back & Front 1 x Lotem XL Singel cassette 1 x Brisque to Improof 1 x Brisque export PS b/w option 1 x EV 800 LVD w/ 8x36GB 1 x Solder XL Wide Conveyor 2. CTP machine Lotem XL 60/80 Creo, YOC 2000 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness, the smallest format i ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...

sheet width: 1350 mm plate thickness: 5 mm cutting angle: 2,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,93 x 2,2 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 450 mm ajustment speed: 160 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 850 mm table width: 100 mm tank capacity: 200 l total power requirement: 7,5 kW weight: 7,5 t Overall size: 3,76 x 2,15 x 2,76 m GENERAL SPECIFICATIONS Hydraulic operation with two cylinders – Assistmach High performance hydraulic gear pump – Rexroth High pressure filter (with clogging detector and bypass) placed before all components, Air removal filter in the reservoir Fast descent by gravity, bending phase and return of the ram are controlled electronically via a proportional flow valves h Bending force controlled by proportional pressure valves – Rexroth Quality oil with high viscosity index Frame is designed and sized using Analyze program Hydrau ...

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

sheet width: 1050 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 1,35 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cargo Tricycle Electric Tipper New vehicle available from stock Description E-Mobile, TUC TUC, Electric Tipper Load Carrier Convertible 1000W/60V , Battery 45Ah with small license plate to drive moped driver's license Loading dimensions L X W X H 120 x 100x x34 + 14 CM RAILING 2 front bench seat Bench with storage compartment Color red 2 speed gearbox for steep mountains Empty weight 265 kg Ab. Total 630 kg ECE Europe-wide expert opinion Stable brakes front discs and rear brake drum Handbrake Lockable seat compartment Tilting tailgate Turn signals and high beam Brake light Reverse beeper Reverse gear Leaf springs on the rear axle for maximum load EU approval, small moped license plate is enough Wheelbase 1915 mm Very good traction even on loose or muddy ground because the weight of the batteries is directly on the drive axle. It lies very well in the curve and  ...

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 190 mm/sec work speed: 12,0 mm/sec work stroke: 275 mm dayligth: 550 mm oil volume: 300 ltr. table height: 900 mm voltage: 400 Volt total power requirement: 15,0 kW weight: 10.800 kg range L-W-H: 5100 x 2100 x 2850 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, S ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 185 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm oil volume: 300 ltr. table height: 900 mm voltage: 400 Volt back stop - adjustable: 800 mm table width: 160 mm total power requirement: 18,5 kW weight: 14.000 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z ...

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including s ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for ...

pressure: 80 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 380 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 5.227 kg range L-W-H: 3750x1950x2400 mm Furnishing: - DELEM - CNC control model DA-53T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec return speed: 165 mm/sec work speed: 10 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 V engine output: 7,5 kW back stop - adjustable: 0 - 500 mm Weight: 4.320 kg range L-W-H: 2.250x1.960x2.750 mm -------------------------- Press brake with optional equipment installation height / Cylinder as well as increased bending beam velocities -------------------------- Facilities: - DELEM - CNC ER 70 graphics controller - Motion control: Y1 - Y2 - X - R axes - Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws - Quick change punch holder AMADA Promecam - Rehfuss-top tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS - electrical system - BOSCH /  ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer  ...

sheet width: 2050 mm plate thickness: 4 mm table-size: 530 x 830 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2,63 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 5 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1350 kg dimensions of the machine ca.: 2,13 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

sheet width: 2550 mm plate thickness: 4 mm cutting angle: 1,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 3,13 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.