front used for sale

– German production – year of production 1995 – right and left spindles with a front milling cutter ensuring parallelism and a right angle of 90° – measurement of the width of the element – electronic width setting TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm control of the width of planing electronic 1 bottom spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (front milling) 4 right spindle 4.2 kW (front milling) 5 top spindle 7.5 kW element width measurement electric height adjustment of feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six steel top rollers one top rubber roller one roller in the working table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm connection diameter 140 mm dimensions of the machine (L/W/H) 456 / 240 / 220 ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

Machine Details Stock number 1105-03812 Machine type CNC turning and milling center Brand GILDEMEISTER Type CTX beta 500 Year of construction 2014 Control type CNC Control 840 D SL SIEMENS Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from site Price Technical details Turning diameter 410 mm Turning length 850 mm Control 840 D SL SIEMENS Circumferential diameter over bed 500 mm Speed range - main spindle 25 - 5,000 min/-1 Drive power - main spindle 25 / 34 kW torque 280 Nm C-axis 0.01 ° Spindle nose 170 h5 chuck diameter 210 mm Chuck diameter 250 mm Spindle diameter in the front. Bearing 130 mm Spindle bore 87 mm bar diameter 77 mm Number of tool positions 16 pos. Number of driven tool stations 16 pos. Drive power applied WZ stations 11.3 kW Speed range - antr. Tool stations max. 4.000 min -1 Tool holder VD ...

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1°50 no. of strokes: 13 Hub/min control: ENC 100M table width: 580 mm throat: 50,0 mm total power requirement: 22,0 KW weight: 9300 kg range L-W-H: 4200 x 2250 x 2100 mm from a maintenance workshop New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears with DURMA ENC 100M NC control Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control Backgauge preselection - X axis Number of pieces Cutting length limitation Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) on ball screws Travel speed 200 mm/sec. ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Stop adjustment: manual; Height indicator: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

pressure: 20,0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5,0 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: 1800 x 1600 x 2000 mm New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided  ...

plate thickness: 8,0 mm ST plate thickness: 5,0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60 l engine output: 4,0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foots ...

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition () Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upp ...

sheet width: 3060 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm back stop - adjustable: 5,0 - 1000 mm work height max.: ca. 820 mm cutting angle: 2,4 ° stroke: 7-12 p/min. down holder: 14 Stück operating pressure: 360 bar Control: ELGO oil volume: 200 ltr. voltage: 400 V total power requirement: 22,0 kW weight: 9000 kg range L-W-H: 4000 x 2300 x 2000 mm Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm zero-backlash ball screw for backgauge Backstop beam can be automatically tilted up in max. position Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - ...

Hydraulic guillotine shear Manufacturer: Ermaksan -wear resistant blades upper knife: two sides; lower knife: four sides - Control unit: CYBTOUCH 6 - 1.000mm rear guide with drive, precision 0.1mm - 1.000mm side ruler and front supports - metric scales - ball screws on the front supports to facilitate the positioning of the sheets - CE approved front, back and side protection plates -light curtains on the back (labor protection) Delivery time: about 4 weeks -Sheet guide system -Automatic hydraulic adjustment of the cutting distance - Silent high pressure pump - Holding springs -adjustable pedal - emergency stop button - shadow line - retractable finger guard - CE certified regulation and conformity Technical data: Cutting width: 2600 Cutting thickness: 6mm Strokes per minute: 24 Number of fasteners: 12 pieces Pressure: 10 to. Main drive: 11 kw backgauge ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle bore102 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

pressure: 90,0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 80,0 mm/sec back stop - adjustable: ca. 725 mm stroke: 120 mm dayligth: 475 mm table height: 860 mm oil volume: 130 ltr. total power requirement: 11,0 kW weight of the machine ca.: 5500 kg. good condition () Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe f ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and  ...

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment and speed control Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Inclined doweling and stake drilling are easy to implement thanks to the rotatable drilling unit. Frequency-controlled motor with frequency converter, speed adjustment via potentiometer Motor power 1.5 kW Start of the engine with practical handle switch Precision chuck with two inserts 13 + 16mm Additional Röhm two-jaw chuck up to 20mm intake Preparation for drill heads Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated by 65 degrees to the left and right Pneumatic adjustment of the machining height, dowels on two levels without repositioning The desired drilling heights can be set fo ...

pressure: 150 t chamfer lenght: 4100 mm stroke: max. 315 mm Control: Cybelec ModEva15T pressing speed: 1 --> 10 mm/sec closing speed: max. 200 mm/sec Stop Time max.: 110 mS compressed air: max 8 bar total power requirement: kW weight of the machine ca.: 13,2 t - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax ...

Offer 23465 Specifications: - Max. working width 1040 mm - max. material thickness (with a strength of 40 kg) 3.5 mm - Table width 300 mm - Stand projection 100 mm - Working height 880 mm - Front angle stop - 3 additional front support arms - Back gauge adjustable by hand 5 - 550 mm - Drive 400 V / 5.5 kW - E.- Footswitch - Space requirements including back gauge, without front support arms -ca. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: DAC 310 total power requirement: 11.0 kW weight: 5450 kg range L-W-H: 3800 x 1940 x 1560 mm Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - ...

Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...

Used Labeling Machine Cavagnino Gatti 1999 The Cavagnino Gatti CG 80 is a used labeling machine manufactured in 1999 This high speed labeling machine offers exceptional performance and reliability for various labeling applications With its advanced features and sturdy construction it has become a preferred choice in the industry Key Features and Specifications The CG 80 model is equipped with five heads enabling efficient labeling operations It boasts two front and back adhesive stations as well as a glue station allowing for versatile labeling options The machine operates in an anticlockwise rotation ensuring smooth and precise label application A notable feature of the CG 80 is its rotating plate with Malta crosses providing stability and accuracy during the labeling process The entire machine is enclosed in stainless steel ensuring hygiene standards and durability Safety protections a ...

Used FIMAL CONCEPT 350 PLUS electronic sliding table saw support surface between the columns mm. 3850x770 Squaring length mm. 3800 blade diameter mm. 350/300 STANDARD EQUIPMENT: EC Legislation - Full-length presser with anti-intrusion strips front and rear of the blade - Fixed front shelf of 1000x510 mm in phenolic material complete with squaring guide up to 2500 mm with telescopic stop - Fixed rear shelf of 1000x400 mm in phenolic material with double electronic rotary stop guide with opening up to 1300 mm. Wheelbase between rear stops 400 mm - 1000x500 mm sliding table in phenolic material that can be positioned both front and rear - Photocell for reading the length of the panel for the automatic adjustment of the stroke of the blade carriage - Mechanical adjustment of the engraving depth with mechanical display Control panel on mobile trolley including: Programmer with m ...

sheet width: 3050 mm plate thickness: 6,0 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10,0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325333 The data for this ad  ...

Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.

bore capacity in steel (diameter): 16.0 / 20.0 mm throat: 240 mm bore stroke: 100 mm spindle taper: 2 MK table:: 280 x 340 mm turning speeds: 130 - 2000 U/min column diameter: 90.0 mm flute distance: 125 mm T-slots: 2 x 14,0 mm total power requirement: 0.37 / 0.7 kW weight: 125 kg range L-W-H: 500 x 600 x 1900 mm Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - Machine swing feet (self-made) - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103751 Machine video: https://www.youtube.com/watch?v=gTVwBLikpZA The data for this ad was created with ModulMWS - the softwa ...

sheet width: 3060 mm plate thickness: 8.0 mm thickness at Niro-steel: 6.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 10 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Number of working hours: ca. 2.100 h back stop - adjustable: 6.0 - 750 mm Control: total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm from a maintenance workshop hardly used - only approx. 2.100 operating hours () New price approx. 40.000 euros Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Back gauge beam can be automatically tilted up to maximum position for pushing extra long sheets through Travel speed 100 mm/sec - 1x stable side stop with T-slot, flip stop and millimeter sc ...

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm ram stroke speed: 100 mm/sec return speed: 9.0 mm/sec work speed: 90.0 mm/sec work stroke: 200 mm dayligth: 447 mm table height: 900 mm table width: 240 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 11600 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 80.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP swiveling operation, front left numerical control Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm - manual table cambering, adjustment via handwheel with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x s ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

bore capacity in steel (diameter): 13.0 / 16.0 mm throat: 185 mm bore stroke: 70.0 mm spindle taper: B 16 table:: 220 x 230 mm turning speeds: 500 - 3200 U/min column diameter: 75.0 mm total power requirement: 0.45 kW weight: 95.0 kg range L-W-H: 425 x 250 x 920 mm from a vocational training center () Furnishing: - manual spindle feed - Digital drilling depth display at the front including zero setting - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - EMERGENCY stop button, front - Connection cable + 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093644 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 5551 : Mai 2024, Zwischenverkauf : Italien : 57800 € : 1161.78 € : 1 : 650 mm : 0,5 - 170 mm : 670 x 2200 mm : 4000 m³/h : 120 mm : 6 bar : 78 (+/-2) dB : 1045 mm : 1735 mm : 2090 mm : 930 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on req ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1487.4 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

pressure: 170 t chamfer lenght: 4080 mm distance between columns: 3680 mm column arm: 410 mm dayligth: 385 mm stroke: 215 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 200 mm table height: 1050 mm travel -x axis: 600/860 mm Number of working hours: ~ 23.280 h oil volume: 350 l total power requirement: 29 KVA weight of the machine ca.: 16.450 kg. range L-W-H: 4620 x 2210 x 2885 mm Machine in a well-maintained condition () Furnishing: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling at the front left high resolution graphic screen Clear, concise menus in the operators language Large tools and products library 2D graphical programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 axis - X axis - adju ...

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ra ...

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...

sheet width:3100 mm plate thickness:6 mm distance between columns:3100 mm no. of strokes:16 - 24 Hub/min cutting angle:0,5 - 1,5 ° down holder:14 Stk. throat:350 mm table height:900 mm oil volume:150 l total power requirement:11 kW weight of the machine ca.:7060 kg dimensions of the machine ca.:4100 x 2200 x 2190 mm 1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment: - CNC controlled hydraulic blade gap adjustment system - CNC controlled cutting angle adjustment system - portable foot pedal - CNC controlled motorized backgauge system - front support arms with t-slot, ruler and flip stop - squaring arm - scales with metric and inches - cutting line illumination and shadow line - emergency stops - swing up backgauge - central lubrication system - front finger protection - rear sliding plates - front sliding plates with ball bearing on the table - 350 mm throat dept ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   table cushion: no PRESS FORCES   total force (nominal): 125 to PRESS TABLE   table surface (left-right): 1100 mm   table surface (front-back): 630 mm SLIDE   table surface (left-right): 700 mm   table surface (front-back): 400 mm   stroke: 150 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke adjustment: yes   stroke min.: 15 mm   stroke max.: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 70 /min   main drive power: 15 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 400 mm ELEC ...

PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: right to left SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 22 to V-RING   nominal force: 25 to TOOL DIMENSIONS   lower table (left-right): 430 mm   lower table (front-back): 490 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 230 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm &n ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: link drive   feedstock transport direction: left to right SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 22 to   stroke: 8 mm V-RING   nominal force: 25 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 220 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm &nbs ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 670 mm   table surface (front-back): 405 mm   thickness of bolster plate: 60 mm   height above floor level: 810 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 315 mm   table surface (front-back): 155 mm   spigot hole diameter: 38 mm   stroke: 75 mm   stroke rate (max.): 140 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 5 mm   stroke max.: 75 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 330 mm   throat (C-frame): 200 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4 kW   mains volta ...

CONTROLS   electronic controls SLIDE   total force (nominal): 40 to TOOL DIMENSIONS   lower table (left-right): 280 mm   lower table (front-back): 280 mm   upper table (left-right): 280 mm   upper table (front-back): 280 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 100 mm   sheet thickness max.: 4 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1840 mm   total height: 1350 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm   sheet thickness max.: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional  ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 670 mm   table surface (front-back): 405 mm   thickness of bolster plate: 60 mm   height above floor level: 810 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 315 mm   table surface (front-back): 155 mm   spigot hole diameter: 38 mm   stroke: 75 mm   stroke rate (max.): 140 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 5 mm   stroke max.: 75 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 330 mm   throat (C-frame): 200 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4 kW   mains volta ...