We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
new
:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position ...
new
internal diameter:250 mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:250 (selbstschließend), 1 Satz harte Backen, 1 Satz weiche Backen, 1 Satz Innen mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:RPM 28.000, diam. 60 mm. Min. diam. cap. 25 mm. x Bohrung 50 mm, Max. diam. cap. 100 mm. x Bohrung 115 mm . internal grinding spindle: ...
new
internal diameter:300 mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:350 (selbst zentrierend) mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:auf Anfrage internal grinding spindle:auf Anfrage fixed steady rests:10-100 mm, 100-170 mm PERFORMANCE AND PRECISION DEGREE Robbi grinding machines are according to the international precision normes ...
new
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...
used
sheet width:2000 mm plate thickness:1.8 mm Controls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mm RAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mm DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diamet ...
used
TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website: https://etimax.seema.de/ YouTube Video: https://youtu.be/zuztvYhDkNc EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products More then 300 machines new and second hand on our seema .de
used
Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...
used
autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...
used
Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 Hz ...
used
Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...
used
Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...
used
CONTROLS NC controls WORKING RANGE - BORING drilling capacity full bore (steel): 40 mm throat (max): 800 mm SPINDLE / HEAD spindle revolutions (min): 335 /min spindle revolutions (max): 1800 /min number of gears: 2 tool fixture: MK 4 TECHNICAL SPECIFICATION table surface (left-right): 1000 mm table surface (front-back): 500 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front/back-: 1250 mm total height: 2500 mm - 9`600h operating hours - div. tool holders, - coolant system - with cube table
used
CONTROLS CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 850 mm Y-axis travel: 600 mm Z-axis travel: 560 mm TABLE table surface (left-right): 1100 mm table surface (front-back): 510 mm workpiece load (max): 750 kg SPINDLE / HEAD spindle revolutions (max): 8000 /min AXIS DRIVES rapid traverse X: 24000 mm/min rapid traverse Y: 24000 mm/min rapid traverse Z: 20000 mm/min TOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2450 mm space requirements -front/back-: 2400 mm total height: 2815 mm & ...
used
CONTROLS CNC controls HEIDENHAIN MILLPLUS IT WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 .. among of them simultaneous CNC axes: 5 X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm rotating range B-axis from: -91 ° rotating range B-axis up to: 12 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° TABLE table surface (left-right): 1500 mm table surface (front-back): 800 mm SPINDLE / HEAD spindle type: tilting head spindle revolutions (max): 12000 /min tool fixture: ISO SK 40 TOOL MAGAZINE number of positions: 32 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSION ...
used
CONTROLS CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 1500 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm rotating range B-axis from: 90 ° rotating range B-axis up to: -90 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° TABLE table surface (left-right): 1480 mm table surface (front-back): 800 mm clamping surface diameter: 802 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle revolutions (max): 16000 /min tool fixture: HSK A63 drive power: 48 kW TOOL MAGAZINE number of positions: 60 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequ ...
used
CONTROLS CNC controls HEIDENHAIN ITNC 640 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 .. among of them simultaneous CNC axes: 5 X-axis travel: 1300 mm Y-axis travel: 1450 mm Z-axis travel: 1000 mm rotating range A-axis from: -1 ° rotating range A-axis up to: 90 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° TABLE table surface (left-right): 1200 mm table surface (front-back): 1000 mm clamping surface diameter: 1200 mm SPINDLE / HEAD spindle revolutions (max): 12000 /min tool fixture: HSK A100 AXIS DRIVES rotation speed C-axis: 400 /min TOOL MAGAZINE number of positions: 103 ELECTRICAL SPECIFICATIONS ma ...
used
CONTROLS CNC controls DECKEL DIALOG 4 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mm TABLE table surface (left-right): 700 mm table surface (front-back): 460 mm workpiece load (max): 350 kg SPINDLE / HEAD spindle revolutions (min): 63 /min spindle revolutions (max): 6300 /min AXIS DRIVES feed velocity (min): 2 mm/min feed velocity (max): 3600 mm/min rapid traverse: 4000 mm/min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3200 mm space requirements -front/back-: 3200 mm total weight approx.: 2000 kg
used
CONTROLS CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING grinding length: 880 mm grinding width: 510 mm TABLE (SURFACE GRINDING) table surface (left-right): 800 mm table surface (front-back): 430 mm workpiece load (max): 800 kg MAGNETIC TABLE length: 800 mm width: 400 mm SPINDLESTOCK GRINDING SPINDLE spindle revolutions (min): 1500 /min spindle revolutions (max): 3500 /min GRINDING TOOL type of grinding tool: wheel diameter (min): 210 mm diameter (max): 400 mm borehole: diameter: 127 mm width: 100 mm ELECTRICAL SPECIFICATIONS mains power supply: 30 kVA DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2350 mm & ...
used
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 8000 mm grinding width: 2000 mm workpiece height (max) with largest wheel: 2000 mm TABLE (SURFACE GRINDING) table surface (left-right): 8000 mm table surface (front-back): 1800 mm workpiece load (max): 18000 kg magnetic table: no SPINDLESTOCK GRINDING SPINDLE X-axis travel: 8825 mm Y-axis travel: 3010 mm AXIS DRIVES traverse velocity X (min): 1000 mm/min traverse velocity X (max): 45000 mm/min ELECTRICAL SPECIFICATIONS mains power supply: 160 kVA mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 24360 mm space requirements -front/back-: 9550 mm   ...
used
SLIDE total force (nominal): 880 to stroke: 305 mm cutting velocity min.: 5 mm/s cutting velocity max.: 70 mm/s closing velocity: 200 mm/s returning velocity: 200 mm/s V-RING nominal force: 400 to stroke: 40 mm COUNTER RAM nominal force: 200 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 1010 mm lower table (front-back): 1600 mm upper table (left-right): 1000 mm upper table (front-back): 1000 mm shut height max.: 460 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 450 mm sheet thickness max.: 16 mm feeding step min.: 1 mm feeding step max.: 999.9 mm sheet length min: 3950 mm speed max.: 48 m/min &nbs ...
used
CONTROLS PLC SIEMENS S5 SLIDE total force (nominal): 160 to stroke: 60 mm COUNTER RAM nominal force: 80 to V-RING nominal force: 80 to TOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 600 mm shut height max.: 335 mm ram adjustment: 125 mm distance between columns (H-frame): 630 mm passline opening (free passage in side columns): 270 mm CROP SHEAR cutting force: 150 kN DIMENSIONS / WEIGHTS total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS- autom. tool clamping device: yes decoiler: optional waste cutter: yes slug separator: optional very well maintained machi ...
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes feedstock transport direction: right to left PRESS FORCES total force (nominal): 315 to nominal work capacity: 45 kNm PRESS TABLE table surface (left-right): 2250 mm table surface (front-back): 1100 mm thickness of bolster plate: 150 mm height above floor level: 1000 mm SLIDE slide force: 315 to table surface (left-right): 2250 mm table surface (front-back): 880 mm stroke: 210 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke rate (min.): 25 /min stroke rate (max.): 80 /min main drive power: 60 kW SLIDE EJECTOR / CUSHION working principle: pneumatical & ...
used
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 30 to PRESS TABLE table surface (left-right): 480 mm table surface (front-back): 428 mm SLIDE (MECHAN. PRESS) slide adjustment: 40 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 40 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER feeder type: roll feeder feeding step min.: 20 mm feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 4.5 kW mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/ri ...
used
CONTROLS PLC SIEMENS S7 SLIDE total force (nominal): 250 to SLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 10 mm/s working velocity max.: 44 mm/s return velocity max.: 200 mm/s COUNTER RAM nominal force: 63 to V-RING nominal force: 100 to TOOL DIMENSIONS lower table (left-right): 500 mm lower table (front-back): 500 mm upper table (left-right): 695 mm upper table (front-back): 730 mm shut height max.: 360 mm ATTACHMENTS -FINEBLANKING PRESS- light barrier: yes closed cabin: yes decoiler: optional leveller unit: optional waste cutter: yes slug separator: yes
used
CONTROLS PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN drive system: servomechanic feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 70 mm stroke rate (max.): 140 /min COUNTER RAM nominal force: 625 to stroke: 25 mm V-RING nominal force: 1250 to stroke: 25 mm TOOL DIMENSIONS lower table (left-right): 600 mm lower table (front-back): 600 mm upper table (left-right): 600 mm upper table (front-back): 600 mm shut height max.: 380 mm ram adjustment: 125 mm STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step min.: 0.1 mm feeding step max.: 300 mm sheet length min: 2500 mm CR ...
used
CONTROLS PLC BECKHOFF PRESS DESIGN drive system: knuckle-joint feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 67 mm stroke rate (max.): 80 /min COUNTER RAM nominal force: 125 to V-RING nominal force: 125 to TOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 560 mm STRIP-FEEDER feeder type: roll feeder DIMENSIONS / WEIGHTS total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS- decoiler: optional waste cutter: yes + Control system completely renewed in 2015
used
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 to SLIDE slide force: 3 to stroke: 38 mm SLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kW OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right ...
used
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /min COUNTER RAM nominal force: 75 to stroke: 15 mm V-RING nominal force: 75 to stroke: 13 mm TOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 9 ...
used
Deck Oven Wachtel Columbus C520/120M Deck oven with 5 decks one above the other. Front in stainless steel, side panels and rear panel in stainless steel. All decks with interior lighting and cooker doors made of stainless steel. Natural stone hobs. Burner arrangement at the front below the decks. Year of construction: 2017 Deck dimensions: width 1200mm, depth 2000mm, height 165mm, Height of top deck 205 mm Baking area: 12.0 sqm External dimensions: width 1620mm, depth 2780mm, height 2345mm Heat output oil firing: 8.6 kg/h Elco oil burner for Columbus C520/120M Furnace control including energy management IQ Touch computer control Computer control with touch screen and smartphone character with tempered glass user interface and high-resolution 9 inch color screen
used
motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock
used
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
used
Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...
Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately
used
-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...
used
Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...
used
Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...
used
Hot counter/ hot display case with 5 bays 650x700 (GN2/1) and 2 glass doors front and rear for handling and removal. The display case is in a very good, cleaned and functional condition. Undertable also available on request, can also be used as Bain-Marie. Technical data: -External size: 980x870x1020mm. -Indoor size: 5x650x700mm. -elek. Voltage: 230V -Frequency: 50 Hz -elek. Power: 3.5kW. -Serial Number: 100010826
used
Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...
used
Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...
used
Kat. No. 11-3231 (tank No. 402) in a very good condition description: outside: marbled – inside: 2B with Gaerspundanschluss with manhole in front 430 x 330 mms with probeer cock with clear expiry DN 65 with rest expiry with Einschweissflansch DN 65 with level indicator with strip and scale with leading holder with level ground with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Kat. No. 11-3234 in very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole in front 430 x 330 mms with Sample Valve with clear expiry DN 65 with rest expiry with welding flange DN 65 with level indicator with strip and scale with leading holder with flat bottom with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Kat. No. 11-3236 in very good condition cubically, very stable execution Description: outside: marbled – inside: 2B with fermenatation lock with manhole lid in front 430 x 330 mms with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level indicator with ladder rack with flat bottom with forwards pulled rest outlet Measurements: Width: 2,550 mm Depth: 5,000 mm Height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...
used
Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...
used
Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...
used
Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...
used
Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...
used
Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...
used
MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...