front loader used for sale

Used Motan METRO HCG 06 vacuum hopper loader for conveying plastic granulate. Stainless-steel hopper with orange cover, vacuum connection, level sensor, control panel and pneumatic components. Control functions visible: Vacuum, On/Off, Level and Alarm. CE marked and made in Germany. Brand new. Operation and completeness were not tested. Auction-ID: A1-51094-55

Captok CK930 Wheel Loader Technical data: - Manufacturer: Captok - Model: CK930 - Year of construction: 2026 - Date of manufacture: 04/2026 - Serial number: 930ZZJ260414 - Condition: New / Unused - Operating hours: 0 h (according to information) - Engine: 4-cylinder diesel engine - Engine power: 42 kW / approx. 57 hp - Operating weight: approx. 3,000 kg - Bucket volume: 0.5 m³ - Bucket width: 1,850 mm - Dumping height: approx. 3,200 mm (according to nameplate) - Overall length: 5,500 mm - Overall width: 1,850 mm - Total height: 2,700 mm - Origin: China Equipment: - Enclosed driver's cab - Front shovel with screwed-on teeth - Hydraulic blade actuation - Hydraulic lifting arms - Forward and reverse driving function - Switchable gears (high / low) - Driver's seat with protective film - LED work lights - Exterior mirrors - Windshield wipers - Cabin fan - Radio w ...

Used Motan METRO G 10-I HPG vacuum hopper loader for conveying plastic granulate. Stainless-steel material container with transparent viewing section, vacuum connection, level control, pneumatic components and control unit. Visible nameplate: type METRO G 10 I-HPG, year 2018, maximum material load 12 kg, pneumatic pressure 4–6 bar, 24 V DC, CE marked. Brand new. Operation and completeness were not tested. Auction-ID: A1-51094-53

DR411-179 ( 1997 ) light blue Year of Manufacture: 1997 Max. Payload: Approx. 1 kg – 3 kg X-axis (Kick / Demolding Stroke): 300 mm (Pneumatic air cylinder) Y-axis (Vertical Stroke): 1000 mm (Pneumatic air cylinder) Z-axis (Traverse Stroke):1500mm NC motor driven (servo Z-axis) Drive System: Pneumatic cylinders on X and Y axes, NC motor on Z axis Control System: Wittmann Compact / Basic controller Small housing on the X axis, Can be mounted on a small machine Auction-ID: A1-51094-17

Used Motan METRO G 10-I HPG vacuum hopper loader for conveying plastic granulate. Stainless-steel material container with transparent viewing section, vacuum connection, level control, pneumatic components and control unit. Visible nameplate: type METRO G 10 I-HPG, year 2018, maximum material load 12 kg, pneumatic pressure 4–6 bar, 24 V DC, CE marked. Brand new. Operation and completeness were not tested. Auction-ID: A1-51094-54

Y-axis (Vertical Stroke): Telescopic arm, 1600mm Z-axis (Traverse Stroke): Rack and pinion drive, 2500mm X-axis (Kick Stroke): 900mm Drive System: High-dynamic AC servo motors on all 3 main axes (X, Y, Z) Wrist / Rotation: Servo-driven C-axis Control System: CNC6 or CNC7 controller (TeachBox) Auction-ID: A1-51094-5

Used Motan METRO HCG 06 vacuum hopper loader for conveying plastic granulate. Stainless-steel hopper with orange cover, vacuum connection, level sensor, control panel and pneumatic components. Control functions visible: Vacuum, On/Off, Level and Alarm. CE marked and made in Germany. Brand new. Operation and completeness were not tested. Auction-ID: A1-51094-56

Hyundai HL760-9A wheel loader, year 2014. Cummins QSB6.7 6-cylinder diesel engine, net power approx. 166 kW at 2,100 rpm. Operating weight approx. 18,350 kg. Equipped with enclosed cab and front bucket. Standard bucket capacity approx. 3.3 m³. Tires 23.5-25. Visible meter: 10,688.9 hours. Approximate transport dimensions: 8,100 x 2,900 x 3,450 mm (L x W x H). Condition and wear according to photographs. Auction-ID: A1-51537-7

Doosan DL420-3 wheel loader. Scania DC13 6-cylinder diesel engine. Motor power: 264 kW. Weight indicated on the machine plate: 24,000 kg. Hours shown on the meter: approximately 11,861 h. Equipped with a closed cab and front loading bucket. Reference tires for this model: 26.5 R25. Reference dimensions: approximately 8,910 x 3,270 x 3,535 mm (L x W x H), depending on the configuration. Used machine with visible signs of use, dirt, wear, scratches, paint damage and corrosion typical of its use. The bucket has wear, corrosion and remains of adhered material. The cab windshield has visible damage/breakage. The seat and interior elements show signs of wear and tear. Consult the photographs to check the general visual condition of the machine, bucket, tires, cab and other components. Auction-ID: A1-51537-4

Volvo L150G wheel loader, manufactured in 2011. Serial number 22561, PIN VCEL150GA00022561. Machine weight 26,100 kg and engine net power 220 kW. Equipped with enclosed cab, OptiShift transmission and front loading bucket. Tyres: 26.5 R25. Approximate overall dimensions with standard bucket: 8,590 x 3,200 x 3,570 mm (L x W x H). Used machine showing signs of normal operational wear. Bucket and body show visible wear, scratches and surface oxidation consistent with use. Please refer to the photographs for further details regarding the machine's condition. Auction-ID: A1-51537-14

Machine starts, drives and works properly. With extra hydraulic connection. Auction-ID: A3-46114-17365

Liebherr L538 wheel loader, year 2015. Equipped with enclosed cab, articulated steering and front loading bucket. Rated engine power: 110 kW. Maximum speed: 40 km/h. Hours indicated on the display: 19,108 h. PIN: VATZ1268JZB040753. Maximum permissible total weight: 17,000 kg. Maximum permissible axle load: 9,500 kg on the front axle and 9,500 kg on the rear axle. The machine shows signs of use commensurate with its age, including visible wear, scratches and surface corrosion on the bucket and different areas of the bodywork. The tyres show visible wear. Refer to the photographs for more details on the condition and equipment of the machine. Auction-ID: A1-51537-8

Extra options : Batteries 2025 , Internal charger Auction-ID: A1-40408-46

New Holland W270 wheel loader, year 2005, equipped with a Cummins QSM11 diesel engine with 6 cylinders and an approximate power of 202 kW. Equipped with enclosed cab, articulated steering and front loading bucket. Rated bucket capacity approximately 4.0 m³. 26.5 R25 tires. The hour meter shows approximately 19,633 hours of operation. Approximate operating weight: 23,500 kg. Approximate transport dimensions: - Length: 8,840 mm - Width: 2,960 mm - Height: 3,590 mm The machine shows visible signs of use typical of construction machinery, including wear, dirt, scratches, loss of paint and surface oxidation in different elements. The bucket shows oxidation and wear and tear. The tires show visible wear. Cab equipped with operator's seat, steering wheel, hydraulic controls and instrument panel. Interested parties are advised to personally inspect the machine prior to bidding to  ...

Caterpillar 930M wheel loader. Year of manufacture: 2019. Identification number (PIN): CAT0930MAKTG04264. Caterpillar C7.1 6-cylinder diesel engine. Motor power: 122 kW. Operating hours indicated on the screen: 15,710.4 h. Total distance indicated on the screen: 39,949.2 km. Reference operating weight: approximately 13,994 kg, depending on configuration. Equipped with a closed cab for the operator. Equipped with front bucket. 4x4 traction. Reference tires: 20.5 R25. Used machine with visible signs of use and wear typical of its activity. Scratches, rubbing, dirt and paint damage/wear are observed in different areas of the machine. Tyres are visibly worn; check the photographs to check their condition. The bucket shows signs of wear and tear typical of loading and material handling work. Refer to the photographs to check the general visual condition of the machine, tires,  ...

DOOSAN DL420 wheel loader. Motor power according to the manufacturer's plate: 264 kW. Maximum weight indicated on the plate: 24,000 kg. 6-cylinder diesel engine. Hours indicated on the meter: approximately 17,061.2 h. Equipped with an enclosed cab and front bucket. Reference bucket capacity: approximately 4.0 m³, depending on configuration. Reference tires: 26.5-25-20PR. Reference dimensions: approximately 8,880 x 3,270 x 3,522 mm (L x W x H), depending on the configuration. Used machine with visible signs of use, wear, dirt, scratches, paint damage, and corrosion consistent with its previous use. The bucket has visible wear and corrosion. The front windshield of the cab has a visible break/crack. Wear is seen on the tires and on different elements of the machine. Refer to the photographs to check the general visual condition of the machine, bucket, tires, cab and operator' ...

Auction-ID: A3-46114-2018

MAN 18.284 tipper truck, year 1999. VIN: WMAM38ZZZYY051147. Registration no.: JLA-617. Odometer reading recorded during inspection: approx. 561,435 km. Fitted with HIAB 102-S-2 loader crane, year 1999, serial no. 2048. Permissible gross weight: 18,000 kg. Manual transmission (8+2). Used condition with age- and use-related wear; damaged seat upholstery, large hole/damage in left door trim, cracked bumper, scratches and corrosion visible. Offered in its current condition as shown in the photographs. Functionality, roadworthiness, mileage and completeness have not been independently verified. Auction-ID: A1-51215-1

2004 Volvo L40B-TP/S, equipped with a front bucket and an enclosed cab. We offer for sale this Volvo L40B-TP/S wheel loader, a robust and versatile machine, suitable for earthmoving, loading, handling and landscaping work. Technical characteristics Brand: Volvo Model: L40B-TP/S Year of Manufacture: 2004 Engine : Diesel Engine power: 71 kW, or about 96 hp Weight indicated on the manufacturer's plate: approx. 9,000 kg Equipment: Front Bucket Cabin: closed and glazed Advertised driving hours: 6,000 hours, with meter replaced Tyres: 4 new tyres Additional equipment: new contact barrel Description: This Volvo loader is a versatile construction machine, designed to meet the needs of construction, earthmoving, agriculture and material handling professionals. Its front bucket allows for moving and loading different materials, while its wheeled configuration makes it easy to  ...

Backhoe Loader Case 580B Brand: Case Model: 580B First put into service: 28/07/1976 Fuel: Diesel Chassis number: 3767907 Front loader 4-in-1 front tray Rear backhoe with bucket Enclosed cabin Rear stabilizers Registration documents present Status: Machine not functional / does not start Presence of a hole in an engine piston Engine repair to be planned Significant traces of use visible in photos Sold in its current state Loading can be done by the seller. Auction-ID: A3-46114-36647

Equipped with GeoProbe 4220 drilling rig, unused soil bucket Auction-ID: A1-50903-5

\" General Description Compact articulated backhoe loader manufactured by SF Power , model SP15-600 . Designed for loading, excavation, trenching and general construction or landscaping applications. The machine is equipped with a front loader bucket, rear backhoe attachment and hydrostatic transmission. Technical Details Manufacturer: SF Power Model: SP15-600 Machine type: Compact articulated backhoe loader Year: 2026 Serial number: 2605135 Engine: Diesel Engine power: 18.2 kW Operating weight: 2,250 kg Rated loader capacity: 800 kg Hydrostatic transmission with F/N/R selector Front loader bucket with bolt-on teeth Rear backhoe attachment Hydraulic stabilisers Hydraulic quick coupler Auxiliary hydraulic lines ROPS canopy LED work lights and beacon Digital instrument display Industrial tyres Condition New, unused machine. The digital display shows 0.0 operating ...

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contac ...

bar feeder, second-hand manufacturer: IEMCA model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com subject to sale and mistakes