front loader used for sale

Rosink RFL Front Loader - Powerful water-based cleansing -Modular - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Basic system in stainless steel design -Environmentally friendly Conception With the Rosink RFL front loader, we offer you an economical and user-friendly solution - particularly suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The basis is a 1-bath system, standard with a turntable, which can be expanded to a multi-bath system on request. Depending on the equipment and needs, different programs can be run inside the washing chamber, such as washing, rinsing, drying, etc. Equipment Basic system in stainless steel version 1.4301 Tank with sloping floor Tanks and washing chamber incl. cladding and insulation Slewi ...

Loader-unloader system Was still in use until about 2 years ago and fully functional until the end. Type ISU210S and ISL175S Find more here - / Contact us at -

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested

table length: Rohmateriallänge 6500 mm table width: Rohrdurchmesser max. 230 mm burner heads: 1 Control: CNC workpiece weight: 300 kg traversing speed: 91 m/min weight: 5750 kg dimensions of the machine ca.: 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding dev ...

Vakona ESK 850 STL-B incl. loading, top condition

Mobile lifting tipper, built in 2018 Good, used condition, ready for immediate use. If you are interested, we will be happy to send you a video link of the tipper in action Price € 5,500 net

suitable for three-point mounting, 85 kg load capacity, Working width: 1

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

Sale front forklift Kalmar with fork adjustment and side shift, Transport high 3,83 m , length with forks 5800mm , width 2550mm, weight 19200kg, approx. 22 000 hrs Very good condition ! Immediately available!

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offe ...

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse  ...

Off-road scissor lift - work platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport Dimensions: 2.27 m x 0.96 m Height: 2.14 m Railing folded down height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Supports can be folded in bright non-marking chains. Climbing ability up to: 30° Overload cut-off: Powered by battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and conditions on ...

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

Off-road crawler articulated work platform off-road platform caterpillar platform Can also be moved when lifted ideal for tree and hedge trimming, fruit tree management, hop garden cultivation assembly work indoors and outdoors. Due to its low dead weight, the machine can also be transported with a car transport trailer. FRONTEQ Type: FBZ-6T Payload: 230 kg Platform dimensions: 1.15 x 0.75 m Platform rotatable: 80° / 80° Transport dimensions 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2700 Kg Working height: 8.4 m Platform height: 6.4 m max. radius approx. 4.3 m Climbing ability up to: 45% Maximum working inclination: 3° / 3° Overload Shutdown: Proportional hydraulic drive Battery drive 2 x 4 pcs 6 V / 230 Ah Integrated charger 24 V/ 60 A German instruction manual included 2-year manufacturer's warranty ...

Roof window roller shutters, blinds, roller shutter curtains, blind profiles -different profiles -Frontal 40: Kit Maniglia Alta -Measurements see: photos/piece lot -Sale: complete -Dimensions: 2800/1150/H550 mm -Weight: 188 kg

Threading chuck, tap chuck, tapping chuck, drill chuck, collet chuck, quick-release drill chuck -Manufacturer: FRONTAL ABW, Quick-release drill chuck, MK3 mount -Type: 5-20 mm -Dimensions: Ø 75 x 257 mm -Weight: 2.9 kg

Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible

Scissor lift off-road - work platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Extendable platform + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload Shutdown: Battery-powered 24 V / 115 Ah Integrated charger 24 V/ 20 A 230 V power supply to platform Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. Other sizes with wheel and crawler drive available. For further dates or offers or availa ...

Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Offer 24338 Drawer cabinet with front door Specifications: - 1 lockable front door, 1 key available - 2 pull-out wheel-bearing drawers - 2 pull-out pull-out shelves / platforms - Load capacity of the drawers + shelves each approx. 100 kg - Pull-out of drawers + shelves 80% each - Platform dimensions approx. W 430 x D 610 x H 270 mm - Drawer dimensions W 450 x D 610 x H 50 mm - Front door in front of the pull-out shelves / platforms - Space requirement approx. W 580 x H 880 x D 700 mm - Weight approx. 80 kg

suitable for Lindner Geotrac, with Faster quick coupler

4.80 m lifting height, 8000 kg lifting capacity, length: 3,840 mm, width: 1,800 mm, height: 2,550 mm, free lift: 1,400 mm, load capacity: 8 t at 600 mm LSP, with tine shifting and tine height adjustment

Fillet system, consisting of: Filleting machine Manufacturer: PRIMA s.r.l Model No.: WCLSE-1000/1 Capacity: 200-800 kg/h Climbing snail Machine: Conveyor Manufacturer: PRIMA s.r.l Type: Cochlear Enhancer Model No.: CHT50B003 Schnetzler Machine: Cutting Device Manufacturer: PRIMA s.r.l Model No.: CHT50B003 Lifting and tilting device Manufacturer: Frontmatec Hygiene GmbH Type: 27000 Accommodates 200 and 300 litre standard loading trolleys for rational use in the food industry

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: 1500/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 235 mm -Transport dimensions: 1500/950/H1120 mm -Weight: 139 kg

Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf<CRLF>ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearing ...

Manufacturer: Spritzstrasse Giradina, Type: Frontenlackieranlage, Year: 2005, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 5-60, Work piece length min-max mm: 100, Geamtlänge Meter: ca.30, Feeding speed m/min: 2,5-5, UV-Strasse: yes, Wasserlackstrasse: yes, Conveyor belts: 2, Schleifmaschinen: kein, Enstaubungsmaschinen: 1, Spraying machine: 1, UV dryer: yes, Anzahl Lampen: 3, Jet drier: 1 MOS Trockner<CRLF>1 Düsentrockner, Outlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Spraying heads - total: 8, work piece detection: yes, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Jet drier length in mm: 10000+17000, Outlet conveyor: yes, FREE TEXT: Inkl ...

Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.

Equipped with: Suitable for Fendt 500 series, with attachments, hydraulic hoses and connections. Mechanical self-levelling front loader for tractors of approx. 90–120 hp with a dead weight of approx. 540 kg, maximum lifting height of approx. 4.07 meters, lifting capacity around 1,730–2,160 kg, breakout force of approx. 2,260 kg, hydraulic working pressure of 185 bar, required oil flow of approx. 60 l/min and a total length of approx. 3.5–4.0 meters. Auction-ID: A1-40139-243

Equipped with: with attachments, hydraulic hoses and connections. Auction-ID: A1-40139-244

Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch

Transport box 2m Auction-ID: A3-43539-19231

Auction-ID: A3-43539-19247

Auction-ID: A3-43538-6000

Hydraulic tipping Well maintained Auction-ID: A3-43539-19255

Auction-ID: A3-43543-393033

Compact Iseki diesel tractor equipped with hydraulic front loader and flatbed. Tractor has 3-point linkage and PTO and has a reading time of 331 hours. Compact model suitable for horticulture, agriculture, stable work and site maintenance. Front loader with maximum lifting capacity of 180 kg included. Japanese quality machine in compact design. Auction-ID: A3-43534-11958

Has all-wheel drive, 23 hp, 4-speed PTO, 16 forward and 16 reverse gears, with reversing switch, on lawn baths. Auction-ID: A3-43534-8023

Kubota compact diesel tractor equipped with KATANA B-40 hydraulic front loader and body. Tractor has 3-point linkage and presumably PTO. Reading hours is 7228 hours. Compact and manoeuvrable machine suitable for agriculture, horticulture, stable work and site maintenance. Front loader with maximum lifting capacity of 180 kg included. Auction-ID: A3-43534-11963

Equipped with Autopower 45km/h; PTO: 540/540E/1000 rpm; 2 double-acting hydraulic valves; fender control; Front linkage with PTO; front axle suspension; \"Mailleux\" Front Loader; tipper knob; hydraulic brake valve; top link; Auction-ID: A1-40139-50

Brush in good condition No collection tray Possibility of skewing Auction-ID: A3-43539-19254

Equipped with: Load sensing, COM 3, under tow bar, drawbar coupling, 4x double-acting rear hydraulic valves, brake valve, work lights, detachable front loader, front PTO, front linkage, 1 double acting front hydraulic valve, radio, air conditioning Auction-ID: A1-40140-60

Equipped with: mechanical quick coupler, hydraulic function Auction-ID: A1-40140-62

Branson 6225R Four-wheel drive tractor with front loader Manufacturer: Branson / Kukje Machinery (Made in Korea) Year of construction tractor: 2022 Date of manufacture according to nameplate: 12.03.2022 Front loader Year of manufacture: 2023 Front loader model: TYM BE25RSL-QB2-DB Category: Compact/Municipal/Agricultural Tractor Only approx. 821.8 operating hours according to the display Engine power approx. 62 hp / approx. 46 kW All-wheel drive Rear hydraulics available PTO 540 rpm Front loader including bucket mounted Hydraulic connections available at the rear Three-point mount available at the rear Tractor ready for immediate use Net weight approx. 3,150 kg Front loader weight 298 kg Lifting capacity front loader: 280 kg without counterweight 600 kg with counterweight Very good general condition Well-maintained machine with normal signs of wear No visible structural damage Hydraulics  ...

Kaiser 3 axle semi low loader, 3rd axle steered axle, hydraulic ramps, LED lighting working all around, LED work light rear, new support leg, Belgian registration documents complete, length bed:8.2m, length Neck: 4.4m, Total 13m Auction-ID: A3-44485-50

The new Omap AT series of three-phase hopper loaders guarantees maximum reliability in the handling of plastic pellets, even over long distances. New Omap - AT series of 3-phase hopper loaders Model AT03-R30G-FT (2024) - (1a) Auction-ID: A1-47049-75

New Omap - AT series of 3-phase hopper loaders Model AT03-R30G-FT (2024) - (2a) The new Omap AT series of three-phase hopper loaders guarantees maximum reliability in the handling of plastic pellets, even over long distances. Auction-ID: A1-47049-76