front loader used for sale

in various stages of construction, incomplete Auction-ID: A1-45411-6

Massey Ferguson 50HX Backhoe Loader Type: Backhoe loader Manufacturer: Massey Ferguson Model: 50HX Serial number: 5443D0896 Engine brand: Perkins Engine power: 50 HP Fuel type: Diesel Cooling system: Liquid-cooled Gears: 8 forward / 2 reverse Maximum lifting capacity: approx. 1,600 – 2,000 kg (depending on configuration) Maximum digging depth: approx. 4 – 5 m (depending on backhoe configuration) Rear tyres: 12.4-24 or 13.6-28 Front tyres: 6.00-16 Approx. machine weight: 6000 kg Approx. dimensions (L x W x H): 6300 x 2400 x 3000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-50

This is a showroom model, without battery. Further completeness / operation unknown Auction-ID: A1-45411-600

under construction, incomplete. Auction-ID: A1-45411-3

48V, in use as a demo model, equipped with internal charger. Without remote control. Including loading box 165L/ Auction-ID: A1-45411-1

Tipping bucket and pallet carrier included Auction-ID: A3-43510-12095

Auction-ID: A3-43510-12096

-Drilling diameters : 200, 300 and 400mm -Quick change skid steer loader -Equipped with hydraulic lines -New Auction-ID: A3-43510-95

new track loader with quick release, lighting, ground key, auxiliary hydraulic connection Auction-ID: A3-43511-6438

Equipped with: Kubota 2cylinder diesel engine, 2x double-acting hydraulic valves, 1x pressureless return, bucket, rubber tracks, standing platform, adjustable walking speed, work lighting Auction-ID: A1-40134-174

Ground tray for Striegel wheel loader 86 cm. width Striegel coupling Auction-ID: A1-40132-255

Equipped with quick coupler, central lubrication, Auction-ID: A1-40134-59

Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29

Equipped with Rated Load Capacity: 1000 kg; Engine power: 42 kW (≈ 57 hp); Operating weight: 3200 kg; Engine: 4-cylinder diesel; Bucket capacity: approx. 0.5 m³; Max. tipping height: 2400 mm; Max. travel speed: 25 km/h Drive: 4x4 articulated steered; Hydraulic system: 160 bar; Fuel tank: 70 L Auction-ID: A1-40134-132

Equipped with 4x1 bucket, forks, hydraulic quick coupler Auction-ID: A1-40134-57

used but ready-to-use VOLVO L70G wheel loader incl. earth bucket, hydraulic quick coupler. Tire tread approx. 40% Machine equipment according to photos ́s No calls on the photos shown on the wheel loader. Auction-ID: A1-45733-21

Equipped with 4x1 bucket, pallet fork, hydraulic quick coupler, Auction-ID: A1-40134-58

solid farm loader of the FTECH brand: Year of manufacture: 2018 Engine power: 18.5kw/ 25 hp diesel Hours: 312BH Drive: Torque converter drive with all-wheel drive hydraulic quick coupler with wheel loader mount - 1x Soil shovel 4.5m³ - 1x pallet fork mech. adjustable - Closed cabin - Heating incl. heating gnome 230V -etc. 800KG lifting capacity when fully folded incl. attachment pallet fork Auction-ID: A1-45733-29

Processing Capacity: Minimum bar diameter: 8 mm Maximum bar diameter: 80 mm Magazine capacity (MP version): 300 mm (inclined warehouse) Magazine capacity (P version): 700 mm (chain elevator magazine) Magazine capacity (F version): 2,000 kg bundle (belt magazine) Bar feed speed: Adjustable up to 500 mm/s Return speed: Up to 1,000 mm/s Maximum Thrust Force: Electronically adjustable (for thin or heavy bars) Thrust system: Brushless motor with digital drive Total length: Approx. 4,100 mm (for 3.3 meter bars) Width: Approx. 900 mm (varies depending on the type of warehouse) Bar axle height: Adjustable from 900 mm to 1,250 mm Total weight (empty): Approx. 1,100 kg – 1,300 kg Auction-ID: A7-44885-33

Track width 200mm, equipped with: squeezer bucket (1080mm), pallet board (1060mm), servo control, mechanical quick coupler, 2x double-acting hydraulic valve, 1x pressureless return connection, led lighting, Euro connection (60mm) Auction-ID: A1-40134-33

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more inf ...