136,773 used machines on RESALE, but how to find them? Machine Search
Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph
Extra options : Front lighting , beacon Auction-ID: A1-40407-6
Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.
A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.
\" Goldhofer STZ-L4 Extendable 4-Axle Low-Loader Semi-Trailer Manufacturer: Goldhofer Fahrzeugwerk GmbH & Co. Model / Series: STZ-L4 Equipment type: Extendable 4-Axle Low-Loader / Semi-Low-Loader Year: 1999 VIN / Serial number: WG0STZL45W0018958 Number of axles: 4 Quantity: 1 unit Heavy-duty extendable low-loader semi-trailer designed for transport of construction machinery, industrial equipment and oversized/heavy loads. Equipped with an extendable loading platform and hydraulic/forced steering system. Technical specifications: Tare weight: 13,480 kg Payload capacity: 32,520 kg Permissible gross weight: 46,000 kg Maximum axle load: 7,000 kg per axle Number of axles: 4 Loading platform height: Approx. 700 mm Retracted length: Approx. 12,500 mm Extended length: Approx. 18,300 mm Extension: Approx. 5,800–6,000 mm Width: Approx. 2,550 mm Steering: Hydra ...
Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm
Loading area length: 2.98 m, loading area width inside: 1.28 m, height of loading area inside: 50 cm, height of floor to platform 40 cm, gross vehicle weight 2000 kg, payload 1390 kg, 610 kg dead weight, total length 3750 mm
Accessories: Loading bucket KSW 3.5 m³, 2,600 mm Loading bucket KSW 2.1 m³, 2,600 mm Quick coupler KSW L70
: ATR 3030 Hawker Life-Plus TC3-LP-10KW Smart Charger for Forklift Batteries 24 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer:Mechatronic Model: mWL 150 square Year of Manufacture: 2019 Weight: 1000 kg Electrical specifications: - Supply: 230 VAC, 50–60 Hz - Supply lead: 3 × 4 mm² L1/L2 (N) / PE - Control voltage: 24 VDC - Full load current: 32 A max - Fuse type: C32A High Inrush Find more here - .ucymachines/ Contact us at - sales@ucymachines
diameter: 3 - 16 mm length: 3000 mm = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frame from JCB loader, axles, hydraulics.
In working order. Power: 157 kW (213.46 hp) Serial Number: CATIT62HEM5G00603
Power: 360 kW (489.46 hp) Fuel Type: Diesel Dead weight: 20,800 kg Maximum load capacity: 5,200 kg Axle configuration: 6x4 Color: Red Equipment: HIAB 288 HYDRAULIC LIFT, RAILWAY UNDERCARRIAGE
Key data: 46 mm, 3250 mm
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
Including pallet Auction-ID: A1-51269-58
New Mikron Hidrolik MHL Pallet Loader for Crane Auction-ID: A3-46111-4619
Including pallet Auction-ID: A1-51269-59
Including pallet Auction-ID: A1-51269-61
Including pallet Auction-ID: A1-51269-60
New Mikron Hidrolik Atasman for 3-tooth loader Auction-ID: A3-46111-4618
Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg
Wheel loader mount, adapter frame, universal carrier -Wheel loader mount: adapter frame, solid design -Inner mounting width: 680 to 730 mm -Mounting: shaft Ø 50 mm, dimensions see photos -Forks: can be supplied at an additional cost, large selection available -Dimensions: 1500/340/H660 mm -Own weight: 104 kg
Bell L2606E Wheel Loader – 227 kW – 12,175.6 Hours – 2010 Specifications: Brand: Bell Type: L2606E Year of construction: 2010 Serial Number: 1DW2606EHA0629611 Engine: John Deere PowerTech Plus E6090H 6-cylinder turbo diesel engine Engine version: common-rail injection, turbo and charge-air cooling Power: 227 kW / 304 hp Transmission: ZF 4WG260 Powershift Switching mode: automatic and manual Operating weight: approx. 24,385 kg Tyre Size: 26.5R25 Length: approx. 9,010 mm Width: approx. 3,065 mm Height: approx. 3,530 mm Wheelbase: approx. 3,460 mm Hours: 12,175.6 hours Features: Heavy Z-kinematics loading arm Load-sensing hydraulics Hydraulic differential lock front Oil-cooled wet disc brakes Ride Control Automatic central lubrication system Built-in Payload Weighing System Automatic bucket leveling Boom Kickout Traction control system Bell Quad-Coo ...
4 rije Corn 6 rije beets Auction-ID: A3-46114-11391
Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.
The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times ...
Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, ...
ID3219 Caterpillar 928G year/Year of construction 2004 approx. 9250 hours/hours 14 t Bucket with cutting edge, fork, hydraulic quick hitch, tyres 100/40 % good Shovel with cutting edge, fork, hydr. Quick coupler, tyres 100/40% good
A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible.
ID3806 Hanomag 66D year/Baujahr 1991 approx. 16,000 hours/hours 20 t Bucket with teeth Shovel with teeth
A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.
An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026.
Manufacturer: PROFIMAT Model: 65.8/270.8 Year of Manufacture: 2007 Type of Machine :Bar Feeder Voltage: 400 V Frequency: 50/60 Hz Power: 2 kW Technical Specifications - Bar capacity range: 65.8 mm minimum to 270.8 mm maximum diameter - Drive system: Servo drive - Type series: Multi-channel bar loading magazine Find more here - .ucymachines/ Contact us at - sales@ucymachines
A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentatio ...
A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 3000mm/750mm/1500mm, Weight: approx. 250kg. Inspection possible by appointment.
Bar diameter 10 – 65 mm Max. rod length 3,000 mm Multi-lane material support
previously attached to Gildemeister TWIN 65 max. bar length 3,300 mm Material Slide Length XLL max. slide outlet 1,670 mm (with shortest intermediate tube) Capacity: Multi-surface magazine 4x400 mm (1600 mm contact surface) incl. guide channels Ø 46 + 66 mm
SHORT ROD AUTOMATIC LOADER IRCO BREUNING ILS – RBK 100 With servo drive Year 2006 Material length: 1200 mm Material diameter from 0 to 5 mm – max. 0 to 102 mm
Key data: 80 mm, 2100 mm
Short bar loader, max length 2100 mm - min/max diameter 8-80 mm - two kits included : 46-66 mm guide channels / 45-65 mm bar pushers - it was fitted to Tsugami MO8SYE
Komatsu – crawler loader Manufacturer: Komatsu Type: D 45 S 1 Year of manufacture: 1986 3047 h Cab Loading bucket Chain width 400mm Weight: 11t Width: 2750 mm Location: 30900 Hanover-Wedemark Price freely loaded:
bar material dia.: max. 85 mm bar length: 3000 / 3500 mm No. 0703 1 used bar feeder TRAUB 3D / E85 / 3000 Z Bar diameter : max. 85 mm Bar length: max. 3000 mm UNPROOFED / As Spare Part The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
From a current recycling we offer you OBJECT. Year of construction 2023 Condition: good (cleaning already ordered) Original price: EUR 25.600,00 Asset Manager: Monika Stüker Phone: +49 (0) 172 2796951 Mail: m.stuekerakf.de We will be happy to provide you with details upon request. Location: 34434 Borgentreich The sale is without warranty Subject to prior sale
Telescopic loading system Suitable models: 8085, 5085T,KL30.5T, 8095T,KL30.8T,KL35.8T Auction-ID: A1-50849-18
jpc crawler skid model ht360, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories, never used Overall dimensions: 2200 x 1150 x 1390 mm Weight: 360 kg Auction-ID: A7-50796-404
5065e Set of 2 gears, 1102426, Auction-ID: A1-50849-554
maximum number of results exceeded
please refine your search
2.500 € 
