135,208 used machines on RESALE, but how to find them? Machine Search
Robotic top loader which is currently taking flow wrapped bars and placing them into the infeed section of an automatic cartoner (which we also have for sale)
Fiat wheel loader FR20, Nr: 5003727Z built in 1983, ready to drive
Extra options : Front lighting , beacon Auction-ID: A1-40397-6
Auction-ID: A3-46152-22019
Equipped with a Volkswagen 4-cylinder diesel engine Auction-ID: A1-48474-28
bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.
Stock number: D938, Loader, stainless steel,, Beritech type berilift., Chain type., Lifting fork with slit grip., For lifting/emtying of Vemag wagons., Total height 4100 mm., Variable tipping height., Estimated max tipping height 3250 mm., Material: Stainless steel AISI 304
Stock number: D1145, Litre: 1.9, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper vacuum loader, Motor: 0.8 kW - 240 Volt, Power consumption: 1 kW, Dimensions: H 451 x D 290 mm, Capacity: 15 kg/h, Working temperature: Max 35 °C, Noise level:
Manufacturer: FARMA Product Type: Hydraulic Timber Grapple / Timber Clamp Application: Forestry and timber handling Year of manufacture: 2014 according to the nameplate Max. load: 1,500 kg Max. hydraulic pressure: 175 bar Rotator: Finn Rotor CR300 Series Rotator Year of manufacture: 2013 according to the nameplate Rotator manufacturer: Finn-Rotor Oy, Finland Design: hydraulically operated timber grapple Rotation: hydraulic rotator available Gripper: double-shell gripper construction Drive: hydraulic Hydraulic Cylinder: Available Hydraulic hoses: available Hydraulic couplings: available Suspension: with rotator and joint mount Attachment construction: included in delivery Material: Steel CE marking: available Nameplate: available Condition: used Quantity: 1 piece Scope of delivery: Timber grapple, rotator, hydraulic lines and pictured add-o ...
Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304
Country of origin: Germany, L max mm: 3.2, Operating hours: 0
TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...
Auction-ID: A1-40311-47
ID3590 Kaelble SL26 year/Year of construction 1990 28,000 hours/hours Bucket with cutting edge, Scania engine, tires approx. 30% good Shovel with cutting edge, Scania engine, tyres approx. 30% good
Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
Equipped with: central lubrication, control Storage capacity: 8 tons Dimensions: 8600x2200x3000 Auction-ID: A3-46157-16341
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 600 mm total height: 1200 mm total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz Clamping range: 3-25mm Rod length: 3000mm
Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph
Upper deck, lower deck and goggles. Auction-ID: A3-46155-21785
A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.
Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm
Loading area length: 2.98 m, loading area width inside: 1.28 m, height of loading area inside: 50 cm, height of floor to platform 40 cm, gross vehicle weight 2000 kg, payload 1390 kg, 610 kg dead weight, total length 3750 mm
Accessories: Loading bucket KSW 3.5 m³, 2,600 mm Loading bucket KSW 2.1 m³, 2,600 mm Quick coupler KSW L70
: ATR 3030 Hawker Life-Plus TC3-LP-10KW Smart Charger for Forklift Batteries 24 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer:Mechatronic Model: mWL 150 square Year of Manufacture: 2019 Weight: 1000 kg Electrical specifications: - Supply: 230 VAC, 50–60 Hz - Supply lead: 3 × 4 mm² L1/L2 (N) / PE - Control voltage: 24 VDC - Full load current: 32 A max - Fuse type: C32A High Inrush Find more here - .ucymachines/ Contact us at - sales@ucymachines
diameter: 3 - 16 mm length: 3000 mm = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frame from JCB loader, axles, hydraulics.
In working order. Power: 157 kW (213.46 hp) Serial Number: CATIT62HEM5G00603
Power: 360 kW (489.46 hp) Fuel Type: Diesel Dead weight: 20,800 kg Maximum load capacity: 5,200 kg Axle configuration: 6x4 Color: Red Equipment: HIAB 288 HYDRAULIC LIFT, RAILWAY UNDERCARRIAGE
Key data: 46 mm, 3250 mm
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg
Wheel loader mount, adapter frame, universal carrier -Wheel loader mount: adapter frame, solid design -Inner mounting width: 680 to 730 mm -Mounting: shaft Ø 50 mm, dimensions see photos -Forks: can be supplied at an additional cost, large selection available -Dimensions: 1500/340/H660 mm -Own weight: 104 kg
Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.
Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.
Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, ...
maximum number of results exceeded
please refine your search
2.500 € 
