135,688 used machines on RESALE, but how to find them? Machine Search
Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t
Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg
Gear motor, electric motor -Speed: 150 rpm -Power: 0.135 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Price: per piece -Number: 4x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.08 kW -Speed range: 150 rpm -Construction: B14 -Diameter shaft: 12 mm -Price: per piece -Number: 2x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg
Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg
Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.
wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20.
Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber
Max.turning length: 600 mm Max swing diameter over bed: 250 mm Quick Change Toolposts:1 Coolant tank:50l Made in Germany Control: manual
x-travel: 1120 mm y-travel: 350 mm z-travel: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm
Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity
used
bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm
used
bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm
x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50
x-travel:1120 mm y-travel:345 mm z-travel:400 mm total power requirement:14,5 kW weight of the machine ca.:3,85 t dimensions of the machine ca.:3.500 x 2.920 x 2.710 mm table-size:1600 x 400 mm spindle taper:SK 50
Ashine: TC800 Serial Number: 25133 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW.
Fritz Shuttle Table Press Closing force approx. 300T Platen 2.7 m x 1.8 m deep 3x adjustable platens top and bottom Type of heating: induction Shuttle located at the rear of the press Used for rubber moulding
grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m
Engine: TC800 Serial Number: 25132 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW. Legal information
x-travel: 1200 mm weight: 2 t : ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.
Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible.
A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible.
Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.
Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.
Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...
x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 165 kg Drilling capacity in steel: 20 mm Throat depth: 210 mm Spindle stroke: 100 mm (130 mm on some versions) Spindle taper: Morse taper MT 2 Max. distance from spindle to table: 450 mm Vertical head adjustment: 250 mm (350 mm on some older versions) Spindle speed range: 355 – 2,800 rpm Number of spindle speeds: 4 Table size: 340 × 280 mm Total power requirement: 1.1 kW Machine weight: approx. 163–165 kg Dimensions (L × W × H): approx. 620 × 480 × 1,280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: ca. 900 mm y-travel: ca. 280 mm z-travel: ca. 400 mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,52,52,5 m No. 5100: 1 used vertical milling machine FRITZ WERNER, type FV 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details.
x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg
x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm
saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden
Mueller Martini 351.0412 unwinding station Built in 2000; working condition
Built 2001 Format: min 140 x 100 mm max 480 x 320 mm Equipment o 3 rod feeder 3738; ready for use
maximum number of results exceeded
please refine your search
