friga bohn used for sale

223 KW Friga-Bohn ECA223 P06 12P Condensers from 2018 were used to cool a 400 KW CHP. complete (closed unit). 2 available 223 KW / 61,110 m3/h 1 x 6 fans Manufacturer: Friga-Bohn Model No.: ECA223 P06 12P Serial number: DL 140 Type: Air-cooled condenser Fans: 1 x 6 Power [KW]: 223 Volume flow [m3/h]: 61,110 Capacity [L]: 84 Year of construction: 2018 Weight [kg]: 925 Dimensions LxWxH [cm]: 452x230x110

FRIGA SYSTEMS 6H-35.2Y Brand:FRIGA SYSTEMS, BITZER Type:6H-35.2Y Stock number:M22-1301 Cooling capacity:70.0 kW Application:Cooling Number of fans:6 Refrigerant:R449A, R452A Refrigerant Content:55 l Voltage:400 Volts Power consumption:22,5 kW Motor power:25 kW Dimensions:2600 x 1600 x 1670 mm Weight:863 kg Year:2009 Number in stock:1 piece(s) Price:Quotation request Description: Very nice Friga Systems condensing unit, equipped with a Bitzer 6 cylinder piston compressor, condenser (6 fans), fan speed controller, liquid vessel 55 liters and a switch box. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C. Visit also our website: used-refrigeration

Kran Bohn KG Projection 18 m Height 9 m Load capacity 2 tons. Remote control Track gauge 4 m mobile complete with wooden grapple Defective rotary gearbox

SABROE SMC 16-100 Brand:SABROE Type:SMC 16-100 Stock number:M21-1268 / M23-1350 Cooling capacity:338 kW Displacement:905 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:100 kW Dimensions:3100 x 1100 x 1900 mm Weight:2,500 kg Number in stock:2 piece(s) Price:Quotation request Description: An old but good Sabroe 16 cylinder compressor with electric motor. Mentioned capacity at -10/+35°C. Visit also our website: used-refrigeration. Just to give you an impression about the brands we have in stock:Grasso, Sabroe, Bitzer, Howden, Copeland, Baltimore, Evapco, Goedhart, Helpman, Friga Bohn, Guentner, Carrier, Trane, Lennox, MTA etc.

x-travel: 1800 mm y-travel: 1200 mm z-travel: 900 mm total power requirement: 50 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 1,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mm y-travel: 1000 mm z-travel: 700 mm table:: 1500 x 1000 mm control: FIDIA weight of the machine ca.: 11 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used milling machine on behalf of a customer Manufacturer: Bokö Bohner & Köhle Type WF 2 Hydro Mill At the moment, the machine can still be viewed under electricity. ATTENTION Location: Bielefeld Sale from foundation.! Dismantling must be carried out by the customer. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, ...

X-travel: 1800mm, z-travel: 1200mm, milling spindle rotational speed: 35.5-1800/min, table rotary movement: 360°, length: 3500mm, width: 2700mm, height: 3050mm, weight: 11.5t, with documentation, the the digital display is defective.

Description: Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 500 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a three-axis digital readout from the manufacturer HEIDENHAIN Spindle speed: 45 - 2800 rpm Approx. Onsite Dimension. (l x w x h): 2,200 x 2,000 x 2,400 mm, weight approx.: 4,000 kg

Description: Machine number: 1860 Spindle speed: 710 - 2840 rpm Operating voltage: 380 V Frequency: 50 Hz Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 900 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a digital display from the manufacturer HEIDENHAIN Approx. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg

Description: Table dimensions: 1200 x 700 mm With 6 grooves Spindle speed: 45 - 2800 rpm Travel distances: X: approx. 700 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with an ANILAM digital display Approx. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg

Description: Consisting of approx. 6 pieces In different sizes Table dimensions clamping angle 1: 500 x 400 mm Table dimensions clamping angle 2: 280 x 200 mm Table dimensions clamping angle 3: 300 x 300 mm Table dimensions clamping angle 4: 400 x 300 mm Table dimensions clamping angle 5: 500 x 400 mm Table dimensions clamping angle 6: 500 x 400 mm All suitable for milling machine for model makings from the manufacturer BOHNER & KÖHLE Approx. Onsite Dimension. (l x w x h): 1,200 x 700 x 500 mm, weight approx.: 300 kg