136,403 used machines on RESALE, but how to find them? Machine Search
Technical data press: Manufacturer Paal (Kadant Paal) Type Konti 600 Year of construction 2008 Total operating hours: 23,020 hours Effective operating hours 1st pump: 10,719 hours, as of August 2026 Effective operating hours 2nd pump: 10718 hours, as of August 2026 Effective operating hours 3rd pump: 9,766 hours, as of August 2026 Number of bales pressed 183,075 bales, as of August 2026 Press force main press 158 t Specific pressing force 12.83 N/cm² Filling volume 3.45 m³ Theor. Throughput capacity approx. 1,266 m³/h Throughput under operating conditions approx. 805 m³/h Bale dimensions 1,100 x 1,100 mm, length variable Drive power 2 x 75 kW Total connected load, 135 kW Bonding 5-fold vertical, fully automatic throughput capacities with a Bulk density of 35 kg/cbm approx. 28.2 t//h Bulk density of 60 kg/cbm approx. 45.6 t/h Bulk density of 100 kg/cbm approx. ...
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...
Key data: 44 t, 1600 mm, 1550 mm
Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...
Press station Stahl PS 46 Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse Beautifully crafted antique Spindle Press
pneumatic Block Gluing Press Wilhelm Leos BLPs pneumatische Blockleimpresse / pneumatic Block Gluing Press Wilhelm Leos BLPs Serial-No. 8487 Pressfläche Breite / Pressarea width max. 420m Einlegetiefe / Insertion Depth max. 500mm Fahrbar auf Rollen / mobile on wheels
Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66 - 2 ME Baujahr / Year 1999 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers
Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device
Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size
FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...
Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...
Key data: 150 t, 2550 mm
Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg
Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4 -1 Frame KSB Cylinder
Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm
Spindelpresse / Spindle Press Tränklein SP Spindle Press Tränklein SP
Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4 -4 Frame SBG Cylinder
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Schließrahmen - Frame KS Letter Press Heidelberg KS -8 Frame KS Cylinder
Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device - W ...
used
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...
pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
200 ton x 4000mm with Rolleri Pneumatic clamps
SANGIACOMO T200 DM-DB 200T eccentric press was built in 2018 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking and stamping. Its wide range of machining capabilities, combined with a press force of 200 tonnes, make it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 DM-DB features a drive system based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution ensures uniform torque transmission, which translates into a smooth working cycle. All drive components are continuously lubricated by a central lubrication system to minimise their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The open side wall enables the feeding of material strip. The press has ...
This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details.
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible.
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Control: Cybelec DNC 600S. Inspection by appointment possible.
MODEL ST-150 Power t 150 Motor power kw 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head Displacement – C mm 1,000 Bridge Displacement – D mm 2,500 Front light – A mm 1,550 Vertical light – B mm 700 Working height – E mm 750 Total front – G mm 3,000 Total side – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displac ...
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
TECHNICAL CHARACTERISTICS: MODEL CF-100/VR Power t 100 Engine power kw 9 Neckline mm 375 Working speed mm/s 5 - 9 Approach speed mm/s 162 Return speed mm/s 230 Maximum pressure bar 290 Piston stroke mm 450 4 Lower table mm 850 × 600 Top table mm 700 × 450 Maximum vertical span mm 650 Working height mm 900 Total front mm 1,240 Total side mm 1,950 Total height mm 2,790 Weight kg 3.820 STANDARD DESCRIPTION: The CF/VR series motorized gooseneck hydraulic press models are available in three different power outputs, from 80 to 150 tons. Specially designed to carry out medium and high production work in stamping, die-cutting and drawing. These state-of-the-art presses stand out for their high versatility, allowing them to be integrated into automatic production lines. They work with a hydraulic pressure of less than 320 bar, which guarantees gr ...
TECHNICAL CHARACTERISTICS: MODEL SH-250 Power tn 250 Motor power kw 5.5 Piston stroke mm 450 Maximum pressure bar 350 Neckline mm 375 Working speed mm/s 2.2 Approach speed mm/s 9.8 Return speed mm/s 17.5 Guide diameter mm 40 Support table mm 2.200 x 600 Table spacing mm 900 Support blocks mm 120 x 120 x 600 Working height mm 850 Total length mm 2.820 Total width mm 2,000 Total height mm 1.615 Weight kg 8,500 STANDARD DESCRIPTION: Our SH Series Horizontal Ram Hydraulic Press is designed with a range of three different powers ranging from 100 to 250 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows us to easily handle large beams and profiles. The horizontal hydraulic press of the latest generation HS series has evolved into a versatility of use ...
maximum number of results exceeded
please refine your search
