frequency used for sale

Tin Shears, High Frequency Sheet Metal Nibbler, High Frequency Tool, High Frequency Machines BOSCH EW/HEP 64A4Z1 0,1 / 0.12 KW 2075 / 2775 strokes / min 200 / 265 V 3AC 150 / 200 Hz sheet thickness: max. 2.5 mm approx. 3.5 m Connection cable used, checked! dimensions ( without cable ): 240 x 230 x 90 mm

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

The 5 liter trimix is intended for industrial use for the preparation of gels, creams, ointments requiring dispersion, dissolution, homogenization, deaeration, heat exchange. The Trimix is made up of: A table frame with stainless steel casing A mixer with two pendular coaxial movements: Slow peripheral movement: Motor: Power 0.25 kW Reduction-output speed: 50 to 200 rpm Driven by frequency converter Agitation: Anchor paddle +4 articulated PTFE scrapers Double direction of rotation Slow central movement of counter agitation: Motor: Power 0.25 kW Gearbox - output speed: 80 to 419 RPM Driven by frequency converter Agitation: 3 streamlined three-blade turbines with a diameter of 120 mm A tank bottom foam concentrate type EFC 70 GMS Motor: Power 0.75kW - speed 3000 rpm Output speed: 600 to 3000 rpm Driven by frequency converter Agitation: 70mm diameter narrow slot machined rotor/stator A ta ...

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (length / width): 3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding uni ...

Rittal steel switch cabinet with 7 Control Techniques Commander SK frequency converters, 8 Danfoss VLT AutomationDrive frequency converters and 3 Vector Commander VC frequency converters, dimensions: 5400 mm x 600 mm x 2000 mm. Siemens PLC CPU components are not included.

Description: Electrical Specifications: Output Current: 19.6 A Available for 20 seconds (peak): 40 A Network Frequency: 50 Hz +/- 0.1 Hz (output) Power Factor (cos phi): 0.98 Harmonic Distortion: <, 5% Input Voltage: DC: 50.4 V AC: 230 V Input Voltage Limits: DC: 44...64 V AC (Bypass/Charge Mode): 156...280 V Input Current at Rated Power: 96 A DC Input Frequency: Sell Mode: 59.4...60.4 Hz +/- 0.05 Hz Bypass/Charge Mode (Default): 55...65 Hz Bypass/Charge Mode (Allowable): 44...70 Hz Charging Current: 85 A Performance: Efficiency: 95.6% (Peak) Power Consumption in Search Mode: <, 7 W Environmental Specifications: IP Degree of Protection: IP20 Ambient Air Temperature for Operation: -25...70 °C Electromagnetic Compatibility: Immunity Standards (EN): 61000-6-1 Emission Standards (EN): Residential, Commercial, and Light-Industrial Environments: 610 ...

Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

FOR SALE 2 SETS COMPLETE SKID ALFA LAVAL LUB OIL PURIFIERS SU 821 H TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE SKID ALFA LAVAL LUB OIL PURIFIERS SU 821 H AT OUR STOCK. PLS FIND DETAILS OF COMPLETE PURIFIERS ON BELOW TYPE SU 821 H ARTICLE NO. 535559205 SER NO. / YEAR 107165 & 107166 2008 FREQUENCY 60 Hz VOLTAGE 575Volt MADE IN SWEDEN SEPARATOR TYPE S 821 NO. / YEAR 4166952 & 4166953 2008 FREQUENCY 60 Hz MADE IN SWEDEN IF YOU HAVE ANY FURTHER QUESTIONS. PLS DO NEED HESITATE TO CONTACT WITH US. PURIFIERS RADOSAVLJEVIC TO TRANSPORT. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE... 1 UNIT COMPLETE SKID ALFA LAVAL FUEL OIL PURIFIER SU 821 S TO WHOM IT MAY CONCERN; WE VE 1 UNIT COMPLETE SKID ALFA LAVAL FUEL OIL PURIFIER SU 821 S AT OUR STOCK. PLS FIND DETAILS OF COMPLETE PURIFIER ON BELOW.. TYPE SU 821 S ARTICLE NO. 176692403 SER NO. / YEAR 108138 YOB 2009 FREQUENCY 60 Hz VOLTAGE 575Volt MADE IN SWEDEN SEPARATOR TYPE S 821 NO. / YEAR 4184021 2008 FREQUENCY 60 Hz MADE IN SWEDEN IF YOU HAVE ANY FURTHER QUESTIONS. PLS DO NOT HESITATE TO CONTACT WITH US. PURIFIER READY TO TRANSPORT. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE 1 UNIT COMPLETE SKID ALFA LAVAL FUEL OIL PURIFIER SU 821 H TO WHOM IT MAY CONCERN; WE VE 1 SET COMPLETE SKID ALFA LAVAL FUEL OIL PURIFIER SU 821 H AT OUR STOCK. PLS FIND DETAILS OF COMPLETE PURIFIER ON BELOW. TYPE SU 821 H ARTICLE NO 535559207 SER NO. / YEAR 107167 YOB 2008 FREQUENCY 60 Hz VOLTAGE 575Volt MADE IN SWEDEN SEPARATOR TYPE S 821 NO. / YEAR 4166954 YOB 2008 FREQUENCY 60 Hz MADE IN SWEDEN IF YOU HAVE ANY FURTHER QUESTIONS. PLS DO NOT HESITATE TO CONTACT WITH US. PURIFIER READY TO TRANSPORT. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Demonstration device Working mass: 800 B x 500 H x 600 D External dimension: 1100 B x 1300 H x 900 T Operation: electric Heating power: 6 kW Voltage: 380V Frequency 50-60 Hz Frequency Ultrasound: 20, 5 kHz Ultrasonic power: 2.4 kW Warranty 12 months

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

1 x large KSB pump + frequency inverters 45 kW Engine: KSB 45 kW 2965 U/min Circulation pump: Type ETANORM G 065-250 G0 138 sqm / h Year of construction 2009 Frequency inverter: Siemens 6SE6436-5BD31-8DA0 The pump was only 1 week in use, the flow rate was not sufficient for this project was replaced with larger pumps, the inverter was purchased to fit and has been Orginalbestandteil

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

SABROE PAC 163 HR-A Brand:SABROE Type:PAC 163 HR-A Stock number:M21-4474 Cooling capacity:1,437 kW Application:Cooling / Heating Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:175 kg Voltage:400 Volts Power consumption:126 kW Motor power:160 kW Dimensions:5800 x 2660 x 2850 mm Weight:8,800 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Description: A very well maintained complete Sabroe water-cooled water chiller/heat pump. This water chiller is equipped with a frequency-controlled Sabroe SAB163HR compressor (up to 6,000 RPM), a Schorch 160 kW electric motor, an Alfa Lava evaporator and condenser, a complete control cabinet with a Vacon frequency controller and a Unisab II compressor/chiller controller. All necessary documentation is available. The stated capacity is for water +12/+7°C in/out. Visit also our website: used-refrigeration

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

Eccentric screw pump SP4/M5 with frequency inverter and bypass Self-priming eccentric screw pump mounted on a chassis, with dry run protection, level sensor and welding adapter Technical data: Rated power 400 - 1 980 l/h Engine power: 1.1 kW Drive: three-phase motor with frequency converter mounted Electrical connection 230/400V 50Hz (3 phases) Weight 24 kg Material 1.4301 / AISI 304 Connections: DN32 EG/AG Temperature: max. 60° Suction height: 4 m Ws

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

We offer high-performance automatic vacuum can seamer based on Ferrum F240,F506G, F706G, F708G(4,6,8 heads) beverage seamer. The basic machine has been completely upgraded and adapted for vacuum food cans. These seaming machines are affordable relativle fast avaible and reliable for long time. Capacity from 350 to 750 cans/min. Lid diameter from 53 to 102 mm Can diameter from 50 to 99 mm Can height from 35 to 120 mm Standard equipment: • With progressive pre-vacuum feeder • With complete seaming tooling • With lid feeding system into the vacuum chamber • The machine has variable speed with frequency converter control • Independent synchronized infeed with frequency converter control • Main Electrical Control Cabinet INOX • Vacuum pump connection and controlled by main cabinet - Speeds below are guaranteed regardless of the type of the lids (standard NEO, ea ...

REM Foundry is built on a 10.000 sqm surface and a further 7.000 sqm added in 2010. The Foundry was designed to manufacture castings made to customer specifications. Here were casted parts ranging from 1 tone up to 50+ tones, for industries like: wind mills, heavy machine tools, mining, energetic etc. At full capacity, the foundry is able to produce over 1200 tones of castings per month. All the machines in the Foundry come from top suppliers such as Inductotherm Europe and IMF Italy, are enviroment friendly and respect all the EU regulations. - medium frequency induction furnace: maximum capacity - 28t - medium frequency induction furnace: maximum capacity - 23t - conveyor carrier for cores - vibrating table for cores - silos with a capacity of 550t - continuous mixer for moulds with maximum capacity of 60t/h - continuous mixer for cores with maximum capacity of 10t/h - sh ...

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 20 mm 1 x impact bolt for round head 22 mm 1 x impact bolt for round head 25 mm Description M22 Weight Weight 9.2 Length mm Length mm 475 Risense size Risense size M22 Cill diameter mm rinie size 22 Impact energy Hz. Impact energy Hz. 20 Air Consumption L / sec. Air Consumption L / sec. 20 Stroke frequency J. J. Stroke frequency J. J. 35 Working pressure Mpa working pressure Mpa 0.63 Inner tube diameter mm inner diameter mm hose 16

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Pyrolyx Pyrolysator Thermal Double Screw Reactor Model 1-FD07 Reactor for the depolymerization and pyrolysis of rubber granules Capacity rubber granules (typical): 1100 kg/h media Compressed air: max. 7 bar Instrument air: max. 7 bar CO2 low pressure: max. 1.3 bar CO2 medium pressure: max. 3.5 bar specifications Dimensions of the system: 14600 x 1540 x 1500 mm Screw diameter: 790 mm Weight: about 20 tons. (metric) Product Contact parts: 1.0473 Pressure tested at 200 mbar Design -100/+200 In operation -80 Temperature maximum: Up to 550°C Operating temperature: 350°C-550°C Power requirement Start-up: 180 kW Energy demand Operation: 140 kW Seal: Gland seal(r) with graphite seal Max sound pressure level: 80 dBA Bearing flushing: with CO2 at 300 mbar engine: Voltage: 400V, AC Frequency: 50 Hz Power: 2.2 kW Protection class: IP54 Frequency transmiss ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

High frequency - miter press Miter assembly machine Miter gluing machine Brand: Grum-Schwensen Model: HF 120 High frequency device Manufacturer: Himmel / Himmelwerk Model: HG 3300 Workpiece cross-section max.: 100 x 100 mm PVAC glue / white glue

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Kannegiesser GF800/5500 80 cm belt conveyor 5.5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. This belt conveyor is specially designed for applications that require a powerful drive Belt conveyor GF800/5500 Belt width: 800 mm Band length: 5500 mm incl. support feet Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

Kannegiesser roller curve conveyor 90° roller conveyor 60 cm The Kannegiesser roller curve conveyor is in very good condition. The roller conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. Roller curve conveyor 90° Roll width: 600 mm Total width: 680 mm incl. support feet H = 635 mm +/- 50 mm adjustable Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!