free cooling used for sale

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series uses scroll technology, where there is no metallic contact with the compression elements, which is why absolutely no oil is needed in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g. in the laboratory, medical or food sectors). The three installed scroll compressor elements were recently overhauled or replaced. Operating hours (total): 15,983 hours (The actual time the compressor has been running since 2001). Regulator hours: 99,527 hours (the time the controller was energized). Runtimes of the individual scroll elements (compressor stages) Operating hours Element 1: 735 hours Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil  ...

Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

FREEZER CABINET, YORK SAMIFI FREEZERS SRL, MODEL: MIDI C/15 Technical features: Refrigerant: NH3/R717 Plates number: 16 plates Stations number: 15 stations Station size: 1835 x 1140 x 100 mm Dimensions: 2700 x 1620 x 2700 mm

RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: FREEDOM / F140; Year of production 2004; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 256mm; Forming width: 386mm; Molding depth: 120mm; Formats: 2.2, 3.2; Length: 7500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .

Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow

Dough divider weigher Model: Stress Free Divider VS - VX 021 Bread weigher in stainless steel design Weight range approx. 200 to 1200 g Hopper approx. 80 kg for doughs with high TA Touch control Output adjustable ca. max. 800 pieces/hour Machine mobile with 2 brakes Belt Flourer and Belt Scale Connection 400V, 16A-CEE plug Machine More bakery equipment in stock!

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - .ucymachines/ Contact us at - sales@ucymachines

Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size: ? 100mm | power: 220V/0.05kW, 50Hz/60Hz | dimensions and weight: L50xW50xH40mm, 45/145kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

General SKU329T1341 MakeAzbil Telstar Technologies TypeLyoAlfa 15-55 No.3392 Year of construction2016 LocationBarneveld Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 General With switchcheck Floorspace0,7x0,76 m Total height1,1 m Weight240 kg Extra SpecificationsIce condenser capacity: 22 kgFinal condenser temperature: -55 °CNumber of compressors: 1Base unit weight: 190 kgTotal power: 3,2 kWPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIT ...

General SKU440W1451 MakeChrist LocationBarneveld CEcheck TypeEpsilon 2-12D Main Features MaterialStainless steel Surface0.95 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,95 m2 Number of plates6 Plate sizes350x450 mm Between the plates85 mm With condensercheck Condenser capacity2x 11,8 l. With cooling compressorcheck Make2x Bitzer TypeS4T-52Y-40P No.1669205890 Year of construction2005 Capacity2x 19,7 m3 Cooling mediumIsceon 89 Motor380-420 volt, 1450 rpm MaterialStainless steel General No.12303 Year of construction2006 Mounted on framecheck With switchcheck Floorspace1,55x1,40 m Total height1,90 m8 Weight850 kg Extra SpecificationsWith vacuum pump, control, computersPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIChristIndustries  ...

General SKU430U1380 MakeHOF Sonderanlagenbau GmbH LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.74 m2 Specified Features - Freeze dryer Freeze dryervacuum dryer Cooling surface0,74 m² Number of plates6 Plate sizes620x320 mm Between the plates120 mm With cooling compressorcheck Cooling mediumR404a MaterialStainless steel 1.4571 (316Ti) General No.GT-26049 Year of construction2007 With switchgearcheck Floorspace2,7x1 m Total height2 m Weight2400 Extra SpecificationsVolume of the drying chamber: 340 LPressure range of the drying chamber: -1 / +0.01 barThe freeze dryer is equipped with a vacuum pump:Brand: PfeifferType: DUO 20MVolume: max 24m³/hPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIHof Vakuum- und KaltetechnikIndustries > Food & Fe ...

NISSEI FREEZER soft serve ice cream machine Water-cooled 400 volts 2.5 kWh H 150 x W 54 x D 84 cm 250 kg

General SKU388X977 MakeZirbus LocationBarneveld CEcheck TypeVTS 300 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) General No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIZirbusIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medici ...

General SKU300W571 MakeSociete Nouvelle Usifroid Syrius LocationBarneveld TypeMinilyo SMH 45 Main Features MaterialStainless steel Vacuumcheck Surface0.6 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,6 m² Number of plates4 Plate sizes508x305x40 mm Between the plates56 mm With cooling compressorcheck Cooling mediumFX 80 MaterialStainless steel 1.4404 (316L) General No.18022 Year of construction1998 Mounted on wheelscheck With switchgearcheck Floorspace1,29x0,88 m Total height1,95 m Weight700 kg Extra SpecificationsProcess de-icing, hot gas,Nominal ice cap, 20 kgWith laptop controlPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPISociete Nouvelle UsifroidIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicines ...

General SKU329T1332 MakeAzbil Telstar Technologies LocationBarneveld TypeLyoAlfa 15-55 Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 General No.3393 Year of construction2016 With switchcheck Floorspace0,7x0,76 m Total height1,1 m Weight240 kg Extra SpecificationsIce condenser capacity: 22 kgFinal condenser temperature: -55 °CNumber of compressors: 1Base unit weight: 190 kgTotal power: 3,2 kWPowdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIT ...

General SKU400X1192 LocationBarneveld CEcheck MakeDometic Main Features MaterialStainless steel Specified Features - Freeze dryer Freeze dryercheck Number of plates5 Plate sizes600x450 mm With cooling compressorcheck MakeDanfross TypeFR8,5GXNO Cooling mediumR134a Motor21 watt, 220-240 volt MaterialStainless steel General TypeLR 400 No.8471181 With switchcheck Floorspace0,85x0,80 m Total height1,92 m Extra SpecificationsVolume 489 l.Powdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIDometicIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsDryers > Freeze dryersIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > Food & Feed >  ...

Rheon Free divider

General SKU257Y263 LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Refrigerator &: Freezer Capacity4 l. Motor230 V Capacity—65 °C Refrigerators &: Freezers MaterialStainless steel 1.4552 General MakeLabconco Serial090604412 D TypeCentriVap Benchtop Centrifugal Concentrators, 7460030 Cold Traps Ultra-Low Cold Trap Floor space0,368 x 0,56 m Total height0,53 m Weight64 kg Extra SpecificationsBenchtop concentration system, Temperature Range -84°C, volume 4 l., on/off power switch,1/3 hp compressor, plug type Nema 6-15, operating temperature -64°C.Generic medicinesOintmentsOther pharmaceuticsRefrigerators & FreezersDairySolid pharmaceuticsBeveragesBiopharmaceuticalLabconcoIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Pharmaceutical > Other pharmaceuticsLaboratory Equipment > Refr ...

General SKU300Y588 MakeCoolvacuum Technologies Spain SerialLT-194004 TypeLyotech-10 Main Features MaterialStainless steel Surface1.44 m2 Specified Features - Freeze dryer Cooling surface1,44 m² Number of plates8 Plate sizes2000 x 720 x 20 mm Between the plates60 mm With condenserBitzer, K373H Condenser capacityRoom side: 14.5 l., —10/120 °C, —1/33 bar: Cooling medium side: 3.1 l., —10/95 °C, 10 bar. With cooling compressorwith buffer tank MakeDaikin Applied Europe S.p.A TypeEWAT025CZP-A1 No.X000322 Year of construction2024 Capacity25 kW cooling Cooling mediumR-32 MaterialStainless steel 1.4301 (304) General Year of construction2019 Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace2,90 x 1,80 m Total height2,3 m Weight3500 kg Extra Specificationswith:Vacuum Pump: Woosung MVP 60, 1,5 kW, 4,5 l.Powdered foodsGeneric medicinesF ...

Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court  ...

RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt., conditions: very good

VENANZETTI COOLING TOWER, for granule. This system allows to cool the granule after extrusion with little space taken, READ CONSTRUCTORS DESCRIPTION :, Spiral elevators, The spiral elevator is the perfect solution for moving a product upwards while simultaneously treating it thermally in very small spaces., The conveyor surface is a rising helicoidal trough, or rather a spiral with a constant pitch. The width of the trough is determined by the difference between the helicoid’s external and internal diameter. The product moves upwards on the conveyor by means of an oscillating thrust movement with controlled frequency and amplitude, and the direction is inclined in order to throw the product upwards., The advantages of this solution are:, -, very small layout space;, - thermal treatments while the product is on the conveyor (heating, cooling, drying, curing, etc.);, - speed on the conve ...

Description Item # 8317 - COOLING MACHINE FOR FRESH PASTA (currently being used for cooling confectionery/candy) Manufactured by ITALPAST Model RF700-36-5A 400Volts, 50Hz This is a multi-tiered cooler, including product infeed conveyor. RF Models are rated at up to 1000Kgs per hour of pasta product (ravioli / cappelletti etc) for lowering the temperature at the core of the product after pasteurization and drying phase and before packaging this is a 5-Tier Cooler, 700mms wide conveyors, each conveyor can be independently controlled, the unit will cool down to 0 Degrees, and also has an automatic belt washing system.

Description Item # 8974 – GUM/ CANDY EXTRUDER and COOLING TUNNEL Last used for gum (to be made into chiclets) Including : CARUGIL STR-300D Extruder - Twin Head Extruder 8kW, 380Volts With Inclined Belt feeding into an EXECUTIVE Cooling Tunnel Type 1240301 400Volts, 50Hz With SIEMENS PLC Controls Including 2 x Freon R407C Compressors

Description Item # 8977 – GUM COOLING TUNNEL Manufactured by TOGUM Model TOK-220 3 x 380Volts, 50hz, 20kW

Description Item # 8979 - GUM/ CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Type KML Single Rope Feeding into a TOGUM Cooling Tunnel Model TOK 350-7-6 380Volts, 50Hz This was working with item #8680 candy cut and wrap

Description COOLING TUNNEL With SEWTEC AUTOMATION Wafer Bar Feeding Station, Conveyor through to a 1000mms wide SOLLICH Cooling Tunnel, about 30metres long. (Previously Used for wafer bars after caramel and chocolate coating, enrobers not included)

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph

Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.