137,138 used machines on RESALE, but how to find them? Machine Search
20154 CUMMINS 4 BTA 3.9GM 50kW MARINE DIESEL GENERATOR UC 1224F BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x 793mm 360 KG
Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
20155 CUMMINS 4 BT 3.9GM 36kW MARINE DIESEL GENERATOR UC 1224C BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x793mm 350 KG
Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.
Control, BHT 9904, Bosello, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law ...
Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Control, BHT 9904, Bosello, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Excellent condition - the device looks like new - The device was tested before being put into storage at that time. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excl ...
Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...
Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.
Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995
Clamping cube clamping table Clamping angle Clamping tower machine table used Clamping surfaces: 3 times approx. 930 x 775 mm 1 time approx. 775 x 775 mm Long hole bore: approx. 70 x 30 mm Plate thickness approx. 30 to 40 mm Total dimensions: approx. 930 x 775 x 775 mm Weight approx. 770 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Telescopic cylinder: 2-stage, single-acting -Piston rod: Ø 61/Ø 41 mm -Total stroke: 990 mm -Total length: retracted 610 mm -Price: per piece -Number: 2 pieces -Dimensions: 610/240/H95 mm -Weight: 21.8 kg/piece
Partial complete engine for Mercedes Citaro, model OM 902.934 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece
LIUGONG - Mini Excavator 9027 F - Price on request -
Post IMA Height: 980 mm with Motor 4,4 kW Motor shaft 35 mm diameter Inner thread M16 left Outer thread 35x1,5 right Price: not reconditioned, from stock Other version available on request
Jeros tray washer Model: 9015 2016 stainless machine, tray cleaner, up to 100trays in 6-8mins, mobile, 3Ph
Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.
Compulsory mixer, agitator, agitator, mixing tool, stirrer -Nominal consumption: 160 watts -Connection: 380 volts -Dimensions: 200/190/H700 mm -Weight: 14 kg
Gratings, gratings, light grids, insert grilles, insert grilles -Dimensions: 940 x 785 mm -Bridge height: 50 mm -Longitudinal struts wall thickness: 3/5 mm - Gratings: Hot-dip galvanized -Quantity: 1 piece available -Weight: 51kg
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...
JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal
5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece
5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...
ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz
MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine
Gram freezer cabinet Type: Baker F 930 CBH 5B Stainless steel without pads / for stacking Coolant: R404a Height: 220cm Width: 80cm Depth: 100cm
Fork positioner with separate sideshift, hydraulic fork adjustment, sideshift, side lift, forklift blade, tine carrier -Manufacturer: SE Fahrzeugwerke, type 1/9953 -Load capacity: 860 kg -Tine length: 1000 mm -Tine width: 595 mm to 1800 mm -Dimensions: 1240/915/H610 mm -Weight: 272 kg
Gram Refrigerator Type: Baker M 930 CBH 5B Stainless steel for 60x80cm and 60x40cm sheets Year of construction 2010 Coolant: R134a Height: 220cm Width: 80cm Depth: 100cm
Woodward / Wärtsilä LinkNet 6 CHANNEL 4-20 mH INPUT in original packaging ! See photos !
Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg
Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.
Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
maximum number of results exceeded
please refine your search
