We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,782 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Height adjustable s/s frame for stunner, dimensions: 5100 mm x 1100 mm x 1900 mm.
used
4 aluminium frames for meat hooks, length: (3x) 2900 mm and (1x) 4000 mm.
used
6 wall-mounted aluminium frames, dimensions: (6x) 520 mm x 40 mm x 1800 mm.
used
10 s/s wall mounted frames for smoke sticks, dimensions: (8x) 700 mm x 1700 mm and (2x) 700 mm x 1400 mm.
used
S/s tank, dimensions: 900 mm x 900 mm x 1800 mm.
used
S/s transport tank, dimensions: 930 mm x 930 mm x 1600 mm.
used
S/s transport tank, dimensions: 930 mm x 930 mm x 1600 mm.
used
Linear actuator, with guide rail FESTO DGP-63-900-PPV-A-B-D2-FK 175138 stroke: 900 mm piston diameter: Ø 6 3 mm Carriage: 230 x 24 mm pmax: 8 bar Guide rail: width: 20 / 18 mm, height: 20 mm 2x carriage: 58 x 48 mm used, tested ! Dimensions: 1380 x 180 x 130 mm
used
Linear actuator FESTO DGP-32-975-PPV-A-B 161781 stroke: 975 mm piston diameter: Ø 32 mm Carriage: 131 x 19 mm pmax: 8 bar New ! with documents ! Dimensions: 1225 x 54 x 72 mm
used
Linear actuator, special cylinder FESTO DGO-25-920-PPV-A-B 11917068 stroke: 920 mm piston diameter: Ø 25 mm rod diameter: Ø 26,5 mm rod thread: 2x M22 x 1.5, length: 15 mm slide: 15 x 50 x 50 mm pmax: 7 bar used, tested ! Dimensions: 1160 x 50 x 50 mm
used
linear actuator FESTO DGP-25-950-PPV-A-B 161780 stroke: 950 mm piston diameter: Ø 25 mm Slide: 105 x 19 mm pmax: 8 bar used, tested ! Dimensions: 1220 x 70 x 70 mm
used
Feet separator, dimensions: 900 mm x 1150 mm x 900 mm.
used
Included in delivery are: 02x workbench stand, used Material color: white Frame profile: approx. 85 x 65 mm Stand height: approx. 900 mm Stand depth: approx. 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2,880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x Washers, M8 The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place ...
used
TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051
used
The Straw Applicator TSA Tubex 9001 is one of the save application solutions. Heavy structure and a speed up to 7500 units/h are ideal for the use with a TBA 19 Filler. The speed can be set variously.
used
Battenfeld Unilog Control 9000 B
new
- CNC Steuerung mit bedienfreundlicher Touchscreen Bedienung - max. Arbeitsbreite 900 mm - min./max. Werkstückstärke 5 - 35 mm - Motor Frässpindel 1,1 kW - Drehzahl 17.400 U/Min. - X-Achse Servomotor 0,75 kW - Y-Achse Servomotor 0,75 kW - Gesamtleistung 3,1 kW - Spannung 400 V, 50 Hz - 2 vertikale pneumatische Werkstückspanner - Gleitmittelpumpe - CE Konformität - Betriebsdruck 6 bar - Abmessungen L=1600, B=900, H=1500 mm - Gewicht 650 kg
new
Technische Daten: - Arbeitbreite min./max. 200 / 930 mm - Schnittöhe min./max. 5 / 30 mm - min. Werkstücklänge 550 mm - Spindeldruchmesser 74 mm - Drehzahl Sägewelle 2600 U/min. - Sägeblatt Durchmesser 205 mm - max.30 Sägeblätter auf Sägewelle - Motorleistung 22,0 kW - Spannung 400 V / 50 Hz - Motor Vorschub 1,5 kW - Gesamtanschluss 23,5 kW - Vorschubgeschwindigkeit 0-12 m/min. - Vorschubrollen 6 Paar (12 Stück) - Absaugstutzen 150 mm - Abmessungen L=2200, B=1500, H=1250 mm - Gewicht 1500 kg
new
- max. Schnitthöhe 90C 195 mm - max. Schnitthöhe 45C 115 mm - max. Schnittbreite 20 x 850 mm - max. Schnittbreite 200 x 680 mm - Sägeblattdurchmesser 550 mm - Motor 5,5 kW / 400 V - Motordrehzahl 2800 U/min. - Arbeitstisch 1290 x 2000 mm - Motorbremse - Absaughaube - Rückzugfeder - CE Konformität - Abmessungen L=2000, B=1000, H=1300 mm - Gewicht 269 kg
used
1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY
new
new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins
used
Siemens PLC CPU rack 115U 943B 6ES5 943-7UB11 Power supply 6Es5 951-7LB21 CPU 115U 943B 6ES5 943-7UB11 CP 523 COMMUNICATION PROCESSOR 6ES5 523-3UA11
used
SAVIO MATEC HF SUPER 4.9VM 4 240 NEEDLES, machine for the production of patterned and plain cotton tights. Large design possibilities. 4 cylinder, 240 needles. For sale - 10 machines. The price is for one piece. Machines in perfect condition, practically unused.
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 271 mm -Stroke: measured 945 mm, according to the nameplate 926 mm -Total length retracted center center hole: 1695 mm -Piston rod holder: Ø 100 mm -Admission cylinder: Ø 100 x 70 mm -universally applicable: -Number: 4 pieces available -Price: per piece -Dimensions: 1950/271/H371 mm -Weight: 448 kg
used
Electric motor, three-phase motor -Manufacturer: Normacem TODAY 125 ar6 -Power: 2.6 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Dimensions: 420/275/H330 mm -Weight: 49 kg
used
Electric motor, three-phase motor -Power: 0.63/0.9 kW -Speed: 950/1425 rpm -Shaft: Ø 24 x 50 mm -Construction: B3/B5 -Protection class: IP55 -Dimensions: 325/170/H230 mm -Weight: 15.7 kg
used
Industrial veneer splicer from the renowned German manufacturer Kuper, model FW/J 920. Technical data : speed of movement: 15 m/min total motor power: 0.45 KW, 400 V, 3 Ph, 50 Hz machine dimensions: 1350 x 580 x 1600 mm machine weight: 185 kg compressed air consumption: 10 L/min working width on the right side: 920 mm veneer thickness: 0.4 - 2 mm The machine is in TOP condition, everything is functional. The year of production is 1999. It was purchased as a used machine in 2017 at the Scachermayer Linz sales center, where it was thoroughly inspected and restored. As part of the service, a new heater and consumable parts were installed, and it was delivered with a Scachermayer warranty. The machine works flawlessly and can be tested in operation. Original technical documentation with the machine. The machine is mounted on high-quality industrial wheels and can be ...
used
Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor ...
used
Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...
used
Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork company Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg
used
27 lfm pallet rack shepherd PR600 New and used goods, top condition see pictures. Height 4.7 m Depth 105 cm Beam length 3.3 m Load/compartment 3000 kg Field load 9000 kg Frame galvanized Carrier blue Negotiation price: € 1,750,-- net from stock Offer consists of: + 9 pcs. frame pre-assembled, depth 105 cm, height 4.7 m, new product + 32 pcs. carrier, length 3.3 m, 3000 kg load/compartment + 64 pcs. Suspension fuses + 18 pcs. concrete anchors + Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are l ...
used
Electrically driven roller conveyor with 90° curve, s/s frame, plastic rollers, roller width: 400 mm, total dimensions: 3700 mm x 2700 mm x 350 mm.
used
Description: electric start mounting kit 50Hz 230V 6/6.3kva 400V 7.5/7.9kva steel frame 14L fuel tank 92dB unused in packaging 4448 Approx. Onsite Dimension. (l x w x h): 920 x 525 x 685 mm, weight approx.: 186 kg
used
Description: electric start mounting kit 50Hz 230V 6/6.3kva 400V 7.5/7.9kva steel frame 14L fuel tank 92dB unused in packaging 4448 Approx. Onsite Dimension. (l x w x h): 920 x 525 x 685 mm, weight approx.: 186 kg
We can offer: Bundeling machine for packs of bags. Producer : Algewa/Switzerland Type: 965 AS Still in operation: No Available: Now
used
Shelving platform approx. 900 m2 1 staircase 1 transfer point Price: in case of self-degradation in the condition as the plant is located at the moment without blocks and shelves. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exch ...
used
Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.
used
Tube-type screw conveyor with 270 mm diameter and 2.900 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 130 mm.
new
Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...
used
FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS
used
new
Injection Pump Diesel Pump Stanadyne A3 DB4429-6101 JCB 320/0674 Condition: unused, there may be traces of storage Voltage: 14V Current: 95A Manufacturer: Mahle Part Number: 11 204 215 JCB Number: 320 08719 Reference: 11.204.467 , IA1484, AAK5840 , MG23, 11.204.893, AAK5881, 11.204.215, AAK5820, 11204467, 11204893, 11204215, 320/08648, 320/08649, 320/08719, 12786, 32008648, 32008649, 32008719, 705516095, 4400cc JCB 444TA1 Engine JCB Agrar Agri Tractor, 524-50, 526-56, 527-55, 531-70, 535-95-AGRI 536-60, 2CX 3CX/PLUS/CLL 4CN 4CX 225T 444, G66 QX 526-56 527-58 926 2WD/4WD 930 940 TCA74, 225 226 T 260 EcoMAX TCAE-55; T4F; 55kW, Tier 3 4 320T 325 T 330 TN 220 Agri TM 180, VM 535-95 540-140 540-200 VM115PD/HD/HPD, VM137 VTM860 527-55-WM Excavator Loader Tractor, 416HT 416S-AGRI PL1105 448 PL185 PL195 PT1120 PT18,
used
Takisawa EX-110 Cnc lathe Working hour : 8949(November 2023) 10 inch chuck Fanuc control unit Machine is in very good condition
used
Ajan PP 130 A CNC Plasma Cutting Machine Cutting area : 2000 mm x 6000 mm 130 Amper Working hour : 982
used
By Pass vertical air tank (accumulator) of 900 liters and 11 bar pressure brand CORDIVARI Air accumulator CORDIVARI By Pass 900 liters, 11 Bar
used
We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 0.90m with 75% discount = 356,00€/pc. net. 60 x Framax Xlife-Element 2.70x2.70m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055
new
Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate clear title to the ...
used
Grill, gas heated, dimensions: 400 mm x 900 mm x 950 mm.
used
Bosgraaf s/s cabinet, dimensions: 950 mm x 500 mm x 2140 mm.
used
SCM cooling unit, dimensions: 760 mm x 900 mm x 1050 mm.