frame 9 used for sale

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

5PC910,SX05-00

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Ground precision ball screw, D63 mm, 962 mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type (123170) 409801/3-1, D63 mm, 962 mm, Fa. Steinmeyer Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 745 mm Length of ball screw nut 152 mm, Max. total stroke 593 mm, Total length of the spindle 962 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 50 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. ...

Motor for Mercedes building model OM 447984-00 Refurbished engine cpl. with fuel injection system, nozzle, water pump, turbocharger, air compressor without starter, alternator and clutch Warranty: 1 year, without KM-limit Identical old part must be returned freight costs: by arrangement

Engine number: 6 902 653 Power: 23 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Ground precision ball screw, 990393, D63x10/8, 1290mm, Honsberg, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 990393, D63x10/8, Fa, Honsberg, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 985 mm Length of ball screw nut 168 mm, Max. total stroke 817 mm, Total length of the spindle 1290 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 54 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a f ...

Very good condition from MTU4000V8

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

90 running meters pallet rack Stow Used goods, very good condition, see pictures Height 6 m Depth 100 cm Beam length 2.70 m Load/tray 3000 kg Frame blue Carrier orange Negotiation price: € 8.650,-- net ex stock Offer consists of: + 33 frames pre-assembled, 12t field load, depth 100 cm, height 6 m + 192 beams, length 2.7 m, 3000 kg load/compartment + 384 pcs hanging devices + 132 pcs concrete anchors Payload shield Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous ar ...

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Lombardini 9LD625 / 2, 2 cyl. air-cooled diesel engine, displacement 1250 cm, approximately 19.1 kw / 26 PS 3,000 1/min. More diesel engines: 1-6 cylinder, various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

Engine number: 7 805 371 Power: 39 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 017 5 241 Power: 57 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 6 567 130 Output: 44 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

This sturdy workbench is perfect for do-it-yourselfers and professionals who need a sturdy work surface with storage space. The work surface consists of a 38 mm chipboard on which a high-quality edged flat sheet is placed, thus providing a solid foundation for any type of project. Under the work surface there is a shelf rack with 12 pull-outs (6 pull-outs per side), which offer plenty of storage space for tools, materials and accessories. The scope of delivery includes: 01x Workbench, used/ new System: SSI Schaefer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm consisting of each: 02x Workbench stand, second choice (new) Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x Workbench trusses, new Material color: blue Box profile ...

1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)

Workbench width: 1,170 mm / Height: 938 mm / Workbench depth: 800 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 1,170 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Width chipboard: 980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm

Workbench width: 1,170 mm / Height: 938 mm / Workbench depth: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 1,170 mm Depth chipboard: 900 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Width chipboard: 980 mm Depth chipboard: 900 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker belt delivery ; working condition

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Cat No. 17-00156 in a very good condition Agitator TMR Type: SK 9042AF-132 M/4 TF TMR Turbo Misch Typ: SK 9042AF-132 M/4 TF I = 23.23 / H6 N1/n2 = 53 1/min Motordata: Type: SK 132M/4 50 Hz; 400 / 690 V; 14,8 /8,55 A; 7,5 kW ; 1445 1/min Measurements: Height: 2250 mm Width: 450 mm Length: 950 mm Length of the large wing: 540 mm Length of the smaller wing: 350 mm Weight: 600 kg available: 3 The price is for one unit.

Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

Vibro screening machine Allgaier type D 950/I Upgrade to Type 950/II Two Vibromotors 0.5 kw Second screen deck, screen elevation 100 mm stainless steel New wire sieve

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new

all stainless steel belt width 900 mm mobile adjustable speed adjustable working height with outfeed conveyor dimensions (l x w x h) : ± 4.400 x 1.700 x 2.200 mm

all stainless steel belt width 900 mm mobile adjustable speed dimensions (l x w x h) : ± 900 x 1.580 x 2.030 mm capacity : 380V, 50Hz, 5.62kW weight : 885 kg

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Control system Battenfeld Unilog 9000 C for Battenfeld injection moulding machine

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Kilia EX3000RS 90 L, in good used and functional condition. Completely made of stainless steel, 90 litre bowl, 6 knife head, mixing gear forward/backward, 2 knife speeds, 2 bowl speeds, electrically operated cutter lid. Dimensions W/D/H 150/130/130 cm. Connection values 400 volts, 29 kW. Workshop-tested, ready for immediate use. More on request.

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration