frame 9 used for sale

General SKU326X669 LocationBarneveld MakeAllgaier TypeD-950/2 Main Features MaterialStainless steel Surface0.7 m2 Sizes diameter950 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0.7 m2 Number of sieve decks:500 µm Sieve sizesDia. 950 mm With covercheck InletDia. 310 mm OutletDia. 200 mm Drive vibro motorcheck Motor2x 0,5 kW, 220/380 volt, 980 rpm With ball cleaningcheck With extra sieve decks1000 µm MaterialStainless steel 1.4305 (303) Information No.555 Year of construction1989 Without framecheck Floor space1,4 x 1,4 m Total height1,0 m Weight350 kgVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

This 3-axis Prima Industrie Platino 1530 PL 9000 was manufactured in 2001. It features a CO2 laser cutting machine with X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 150 mm. Maximum linear speeds reach up to 40 m/min on the X and Y axes, and 20 m/min on the Z-axis. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 PL 9000 machine we have for sale. Contact us for more information.

General SKU326X671 LocationBarneveld MakeAllgaier TypeD-950/2 Main Features MaterialStainless steel Surface0.7 m2 Sizes diameter950 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,4 m2 (2 x 0,7 m2) Number of sieve decks:2 (3000 µm and 560 µm) Sieve sizesDia. 950 mm With covercheck InletDia. 210 mm OutletDia. 200 mm Drive vibro motorcheck Motor2x 0,5 kW, 220/380 volt, 980 rpm Sieve perforation0,4 mm With ball cleaningcheck With extra sieve decks4 (1000 µm, 560 µm and 315µm) and extra ball deck MaterialStainless steel 1.4305 (303) Information No.573 Year of construction1990 Without framecheck Floor space1,4 x 1,4 m Total height1,0 m Weight350 kgVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 2500 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.

This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine.

x-travel: 4500 mm y-travel: 2000 mm z-travel: 1200 mm spindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information.

Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.

This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information.

General SKU397X1416 LocationBarneveld CEcheck Pressure Working pressure28 Bar Main Features Heating (medium)Electric Capacity9 KW Temp.120 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck (cooler/chiller) Water heatercheck Electric heatingcheck Electric capacity7,8 kW, 400 volt With coolingcheck (water) Capacity45 l/min circulation (pump) Temperature—20 / 120 °C Tank capacity6,70 l. With pumpcheck Capacity55 l/min With temperature controllercheck (as is) Information MakeLauda TypeXT950 W Mach.No.LWP521-15-0004 Mounted on wheelscheck With switchcheck Floorspace0,46 x 0,56 m Total height1,30 m Weight180 kg Extra SpecificationsCooling medium R404a, pressure 19-28 bar, volume 2 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in wo ...

This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine.

General SKU279X363 LocationBarneveld MakeRosenmund Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor6.8 KW Surface0.22 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,22 m² Capacity175 l. Vessel sizesø 750 x 900 mm Vessel can be tiltedcheck Top connectionscheck Solids outletDN200 With jacketcheck Max. temperature—20 / 200 °C With stirrercheck Motor6,8 kW (380 V, 1450 rpm) Stirrer can be liftedcheck MaterialStainless steel 1.4539 (904L) Information TypeRPD 0.2-623-91 Mach.No.2471 Year of construction1991 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,00 x 1,17 m Total height2,60 m Weight2000 kg Extra SpecificationsWith Single tempering unit, type SKA-12-L, 24 bar, 14,5 kVa.Nutsche filters ...

This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine.

General SKU379X941 MakeIntron TypeCeast 9050 Mach.No.9050B18055 Year of construction2019 Main Features MaterialMild steel Motor0.05 KW Specified Features - Miscellaneous MaterialMild steel Motor0,05 kW, 115/230 volt Information LocationBarneveld Floor space1,0 x 0,45 m Total height0,95 m Weight220 kg CEcheck Extra SpecificationsImpact Energy Range: 0.5 J to 50 J (0.37 – 36.9 ft-lb). Display &: Control: Integrated touch panel with embedded PC for test control and results. (as is) :MiscellaneousÌnstronMiscellaneous > MiscellaneousBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information.

General SKU390X1021 MakeSchmidt LocationBarneveld CEcheck TypeSigmawig ST 12 VDN Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length348.5 mm Sizes width197.5 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface8,7 m2 Capacity8,912 l. Number of platens64 Plate sizes197,5x348,5 mm ConnectionsDN50 Max. temperature20-180°C Information No.08V000422 Year of construction2008 Floorspace0,213x0,40 m Total height0,770 m Weight161 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please v ...

900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

roll diameter: 400 mm throat: 900 mm workpiece height: 400 mm table-size: 700 x 660 mm saw band length: 4630 mm turning speeds: 45 - 500 m/min : mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Dimensions (LxWxH): 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polar 92 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term

Used Tiede crack detection system in very good condition, industrial quality. System for longitudinal/transverse crack detection with manual or fully automatic demagnetization. Special accessories: UV super light, large area shower, blackout cabin.

Industrial belt conveyor unit suitable for material handling and internal transport in production, warehouse, or packaging environments. The conveyor is mounted on a stable steel framewith adjustable feet and is equipped with an electric drive and control panel for reliable operation. The conveyor features a flat belt with side guides, allowing safe and controlled transport of goods. Speed ad operation are managed via the control box mounted on the support column. The unit is designed for continuous industrial use and can be integrated into existing production lines. Construction: Steel frame with adjustable supports. Drive: Electric motor Control: Control panel included Belt type: Flat belt conveyor

A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible.

A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible.

CNC machining center Type: c-expres 920 classic Manufacturer: Format-4 Year: 2017 included: 15 drills 1x milling cutter 1x saw Machine in good condition, fully functional, under power Find more here - / Contact us at -

Operating hours: 97’919 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75 Screw diameter (Ø): 55 Air valves: 4 Controllable

Operating hours: 132‘186 h Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Screw diameter (Ø): 55 Air valves: 4 Controllable -With dosing system -Handling robot Wittman, available as an option upon customer request

Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Fully automatic machine with automatic plate feeder consisting of 5 cassettes, identical to AGFA Avalon N8-60 XT, available at short notice, price on request

Manufacturer: AVESCO Model: TBG 926-2K Erdgas Year of Manufacture: 2008 Type of Machine : CHP plant with peak load boiler (gas) Power Pth: 1950 kW (connected load WV) Pel: 175 kW Gas Engine: Liebherr TBG 926-2K, S/N 2005 02 7547 Synchronous Generator: Baujahr 2007, HCI 434 C2 250 kVA, S/N D23055s001 Electrical Output: 176 kW el Thermal Output: 260 kW th Operating Hours: Requirements: operation according to 90,000 Bh Weight (approx.): 8,000 kg Find more here - / Contact us at -

Erlab Captair Filtair 936 Filter Extractor Erlab's exhaust-free, filtering chemical extractors offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless benefits that provides end-to-end protection throughout the lab and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Pros Complete user protection Filtration safety : All models of captair filtair filter extractor comply with the AFNOR NFX 15-21 1 Class II standard. Pollutant retention capacity of chemical vapours in the working area, guaranteed by controlling the air velocity on the façade and complying with pollutant retention standards (XPX 15203, BS 7258, DIN 12927) Sampling valve for the expelled air allows the user to control the filter ...

Ricoh PRO c 9210 year 2021 135 pages/min. vacuum feed LCIT RT5120 vacuum feed Banner Sheet Tray Type S9 finisher SR5110 high capacity stacker SK5040 SR5000 series output tray for banner sheet type S6 color controler E-46 EFI Graphic Arts Package Premium Edition EFI ES-3000 23 million colour A4 6,5 million black A4

Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional ultra-low temperature freezer from the Lab Care series from the Spanish manufacturer Infrico It is specially designed for use in laboratories and medical facilities to safely store samples at extremely low temperatures Technical features The LTF 90S is characterized by high temperature stability and precise control According to Infrico Medcare, the LTF series offers the following standard specifications: Control: Equipped with a digital controller and an intuitive touch screen Precision: Temperature stability is around ±1°C, with uniformity of less than ±2°C Alarm system: Has visual and audible alarms for temperature deviations, sensor faults and open doors Cooling: Use of natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmen ...

Operating hours: 75’851 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55 Screw diameter (Ø): 55

General SKU298W568 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume960 Ltr. Surface8 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface8 m2 Drying chamber capacity960 l Drying chamber sizes1000 x 1000 x1000 mm Max. temperature120°C With jacketcheck Max. temperature120°C Number of trays8 Tray sizes1000x1000x20 mm Distance between the trays90 mm With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck MaterialStainless steel 1.4301 (304) Information MakeAlb. Klein Machine number510173 Year of construction1990 Floorspace1,40 x 1,70 m Total height2,0 m Weight1650 kg Extra SpecificationsWith 3 trolley’s with trays, dim. Tray 420x880 mm : Technical specs Extra info ...

Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.

General SKU310X476 MakeFIB industries B.V. Leeuwarden TypeR-101.200 No.730406-05 Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket5.5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume9500 Ltr. Motor11 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity9500 l. Vessel sizesDia. 2200x1800 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections(2x) dia. 80 mm, (2x) dia. 50 mm OutletDia. 100 mm With jacketVolume 900 l. Max. temperature140°C/70°C (vessel/jacket) With paddle stirrercheck (2-stage) Motor11 kW, 400 volt, 1465 rpm, (Ex) Speed mixing shaft72 rpm Information Floorspace2,7x2,7 m Total height5,2 m Weight6500 kg CEcheckStainless Steel ReactorsFIBReactors >  ...

BILLION Dixit 900 Tons Clamping force: 900 T - 9000 KN Injection unit: H 6860 Screw diameter: 120 mm Passage between columns: 1025 x 1025 mm Tray dimensions: 1550 x 1550 mm Min/max thickness of the mould: 300 - 1200 mm Opening stroke: 1250 mm Injectable volume: 5938 cm3 Material pressure: 1155 bar Dimensions: 11.5 x 2.5 x 3 m Weight: 53,000 kg

General SKU369X882 LocationBarneveld CEcheck MakeBüchi TypeE-916 Pressure Working pressure150 Bar Main Features MaterialGlass Volume0.04 Ltr. Specified Features - Extraction Extractorcheck Capacity10,20 and 40 mL Max. temperature30°C-200°C MaterialGlass Information No.1000054873 Year of construction2010 With switchcheck Floorspace0,70x0,50 m Total height0,75 m Weight98 kg Extra SpecificationsWith laptop, extra bottles, 6 positions, 4 solvent ports, : ExtractionBüchiColumns > ExtractionBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The CATERPILLAR 950G is in good condition, fully operational, there is insurance, the inspection has been passed. Engine 6000 cm³ Engine power 134 kW Fuel Diesel Registration certificate EM135962 Technical maximum mass 18300 kg Kerb mass 17757 kg Wheelbase 3350 mm

General SKU208X043 LocationBarneveld MakeWurm Dietzel Pressure Working pressure8 Bar Main Features MaterialChromed steel Motor18.5 KW Surface10.4 m2 Length2800 mm Specified Features - Roll dryer Roll dryercheck Rolls chromium platedcheck Roll surface10,2m² Roll sizesDia. 991x2800 mm Steam heatingcheck Max. temperature100°C-175 °C With knife dischargecheck Motor18,5kW, 400/690V, 1460rpm Roll speed3-9 tpm Roll dryers Rotating drum dryercheck Adjustable drum inclinationcheck MaterialCast Iron Hard Chromium Information TypeUnknown Year of constructionUnknown (missing type plate) Mounted on framecheck With switchgearcheck (as is) Floorspace1,0x2,8 m Total height2,8 m Extra Specificationsvolume: 1900 l equipped with 2 steel application rollers and 2 lined rollers discharge with scraper Roll dryersWurm DietzelDryers > Roll dryersBrand > Wurm Dietzel What you  ...

General SKU336T901 MakeJ. Engelsmann AG TypeM3.C.187/3-1.4541 Mach.No.30059 Year of construction2006 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1.9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck With extra sieve decks1 MaterialStainless steel 1.4541 (321) Information LocationBarneveld Mounted on mild steel framecheck With switchcheck With switchgearcheck(as is) Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU366W1291 LocationBarneveld MakePfaudler-werke Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Motor5.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1m² Capacity903 l., (800 l.) Vessel sizesdia. 1100 x 900mm Top connectionscheck Solids outletcheck Liquid outletcheck With jacketcheck Max. temperature-10°C/+200°C With stirrercheck Motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Stirrer can be liftedcheck With hydraulic unitcheck With pumpcheck MaterialGlass - Enamel Information TypeDR-filter Mach.No.50169 Year of construction1990 Mounted on legscheck With switchgearcheck Floorspace1,1x1,1 m Total heightCa. 4,75 m Weight1850 kg Extra Specificationswith bottom outlet valve. Nutsche filtersPfaudler-werkeFilters > Nutsche filter ...

General SKU308U650 MakeLFC Lochem bv LocationBarneveld TypeMVDCD 900/1000/13.5/11 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface13.5 m2 Cake330 Ltr. Specified Features - Horizontal plate filter Plate filterVertical pressureleaffilter Notified bodyTÜV Filter surface13,5m2 Number of platens11 Between the plates70mm Solids outletdia.350mm With jacket(20 ltr) Max. temperature10-160°C Cake capacity0,33m3 MaterialStainless steel 1.4404 (316L) Information No.P9501/0480C Year of construction1996 Floorspace1,5x1,2 M Total height2,8 M Weight1000kg Extra Specifications- with knocker Horizontal plate filtersLFC LochemFilters > Horizontal plate filtersBrand > LFC Lochem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4408 Brand: RMGT Type: 970ST-5+LED Construction year: 2022 Available: directly Status: In production Location: USA Printing units: 5

General SKU339S622 LocationBarneveld MakeEllerwerk (D) Type931 L-D Main Features MaterialStainless steel Motor5.5 KW Inlet diameter25 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesdia. 500 x 320mm Wall thickness10 mm Max. loading weight35 kg Liquid outletDN50 Motor5,5 kW 220/380 volt (Ex) Max. basket speed3000 rpm MaterialStainless steel 1.4571 (316Ti) Information No.93025 Year of construction1994 Mounted on framecheck Mounted on wheelscheck With switchcheck as is Floorspace1,8 x 1,1 m Total height1,8 m Weight1250 Kg ATEX compatiblecheck Extra Specificationssuitable for inert gas Basket centrifugesEllerwerkCentrifuges > Basket centrifugesBrand > Ellerwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldw ...

General SKU248T380 MakeBühler TypeSDVE-900 No.74873 Year of constructionunknown LocationBarneveld Main Features Motor55 KW Width900 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width900 mm Motorcheck Landert, 55 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Floorspace2400x1700mm Total height1600mm Weight4200 KgThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.