frame 5 used for sale

Key data: 2100 kN

Sumitomo Demag Systec 210/580-430 with the Sepro Success 22 robot / hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 153 g Spray pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Handlebar spacing: 580x580 mm Size of the clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Air Valve x 9 Hydraulic, needle-core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air Core Pull x 5 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection un ...

Key data: 1600 kN

Krauss Maffei KM 161-540 PX / Electric Machine Year of Make: 2019 Injection unit: Screw diameter: 40 mm Injection weight: 206 g Spray pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x470 mm Size of the clamping plates: 710x660 mm Ejector: electric Clamping unit: toggle lever Control: MC6 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length ...

Key data: 500 kN

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of th ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional ...

Key data: 500 kN

Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm  ...

Key data: 500 kN

Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible t ...

Key data: 500 kN

Arburg 320S 500-60 Year of Make: 2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Dimensions: Weight: 2350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pumps/motor: 11 kW Heating power: 4 kW Total power: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 500 kN

Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected mach ...

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of manufacture: 05.2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control ...

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compr ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 04.2012 Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Control with air valve Core train control Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrica ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lub ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 09.2012 Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Control with air valve Core train control Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubri ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the  ...

Key data: 1600 kN

Arburg 520S 1600-290/100 / Production line with the Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air Valve x 3 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying Machine with two cylinders /  ...

Key data: 2000 kN

Arburg 570H 2000-400 e² / Hybrid machine / Production line with the Wittmann W823 robot / Operating hours: h in automatic mode Year of manufacture: 07.2016 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inver ...

Key data: 2000 kN

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp It is possible to buy a turntable for an extra charge Dimensions: Weight: 7300 kg All offered machines are started by our service technicians before they ar ...

Key data: 2200 kN

Arburg 570C 2200-1300 / Hybrid machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Injection weight: 469 g Spray pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All offered machines are started by our service technicians before they are sold ...

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...

Technical data: - Cutting range at 90° around 310 mm - - flat 520 x 310 mm - flat at 45° left 350 x 310 mm - flat at 30° left 230 x 310 mm - flat at 45° right 260 x 310 mm - Mitre adjustment left + right - Smallest material dimensions round / flat 10 / 10 x 8 mm - Smallest section length 40 mm - Digital mitre degree number display - Saw blade dimensions 5000 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Bundle tensioning device - Micro spray coolant device - Total drive power 400 V / 6.0 kW - Space requirement approx. W 3000 x H 1600 x D 1750 mm - Weight approx. 1900 kg - 9 pieces of feed + removal trestles height-adjustable

Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-560-A -Volume flow rate: 22800 m³/h -Total pressure: 4200 Pa -Motor: Schorch 37 kW 1470 rpm -Inlet connection: Ø 560 mm -Outlet connection: Ø 560 mm -Fan wheel: Ø 940 x 200 mm -Protection class: IP 54 -Dimensions: 2830/1230/H1700 mm -Weight: 950 kg

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

X-axis: 570mm, Y-axis: 370mm, Z-axis: 350mm, working area dimensions: 1050x720mm, U/V-axes: 120x120mm, taper angle: ±20°, max. workpiece dimensions: 770x520x340mm, max. workpiece weight: 1t, wire diameter: 0.15-0.3mm, wire tension: 3-23N, max. wire feed: 420mm/s, floor-to-table distance: 995mm, dielectric tank external dimensions: 725x2550mm, weight empty: 600kg, capacity: 800l, connected load: 15kVA, control: Sodick LQ33W, length: 2600mm, width: 2740mm, height: 2390mm, machine footprint: 3700x3900mm, machine weight: 4.6t, cutting time: 13,775h, machine-on time: 62,484h, with Super-Pika, wire chopper, SMS box with wall-mounted enclosure, an on-site inspection is possible.

5-axis machining center, year 2016, CNC Doosan-Fanuc i. Used machine. More info & price on IndustrialBuyer.

Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan 2019, unused, mounted on frame with 45KW motor, see plates for full spec

Key data: 1600 kN, 184 g/PS, 40 mm

Arburg 520A-1000-400 (246) Hybrid injection moulding machine with sorting flap and gas reinforcement Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Clamping force [kN]: 1600 Gap spacing [mm]: 520 x 520 Plate size [mm]: 790 x 795 Control Type: Selogica Tongue: German Installed power [kW]: 21.2 Working time [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot connection: Yes Air Valve: 3x

1. Left device: Cloos GLC 556 (MIG/MAG welding machine) Type / Model: Cloos GLC 556-C (robust industrial device series with separate wire feeder case) Process: MIG/MAG welding power source for professional industrial and workshop use Welding current: Strong power in the upper ampere range (designed for heavy welding work up to approx. 550 A) Mains connection: 3-phase three-phase current (400 V) Construction: Two-part system consisting of a compact power source (on trolley) and an external wire feeder connected by an intermediate hose package Special feature: Often equipped with integrated liquid cooling for the welding torch 2. Right device: Linde MIG 200 (MIG/MAG welding machine) Type / Model: Linde MIG 200 (compact workshop and assembly device) Process: MIG/MAG welding machine (mixed gas / CO2 or suitable for flexible use) Welding current ...

Becker VTLF2.500/0-79 Vacuum pump 2021, speed 950 min -1, Power 11Kw, Inlet capacity 490 m3/h, Max vacuum 250 mbar, 3Ph

Key data: 4700 , 600

For sale complete installation 2x diesel generator set 1x Generator set Brand: MAN Type: 8L 40/45 Year: 1998 Power: 5832 KVA Alternator: Leroy Somer 1x Generator set Brand: MAN Type: 6L 40/45 Year: 1994 Power: 4265 KVA Alternator: AVK The equipment included with this installation can be seen in the photo More photos on request

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW

PAPER CUTTER EBA MULTICUT 10/550 CNC -Year 2003 -Working width 55 cms -Light barriers, program control, air table -Lateral side tables -3 spare knives, all tools and manuals -Power: 220 volts/ 50 HZ - 1,5 Kw. - Weight 300 Kgs. -In good conditions, immediately available

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Vacuum packaging machine for Webomatic trays -Type: TL 500 - Power: 6KW -Capacity: About 15 cycles/min, 60 trays/min -With technical documentation -Busch vacuum pump -Pump capacity: 100 m3/h -Input tape: 2 x 150 mm -Automatic tray transport -Cutting out the outline of the package -Touch control panel -Power supply: 400V 3Ph 50Hz -Made of stainless steel -Machine External Dimensions: 4000 x 980 x 1650mm -External dimensions of vacuum pump: 1070 x 680 x 740 mm -Condition: Used, very good, ready to work

Deduster Manufacturer: PharmaFlex Type PF 500 Year of construction 2009 Suitable for tablets/effervescent tablets Dedusting technology: Vibrating ascending spiral Air jet: None Deburring option: None Micro tablets diameter 2.5 mm: 0 Small tablets diameter 5 mm: 3000000 Medium tablets diameter 13 mm: 500000 Effervescent tablets diameter 20 mm: 150000 Small capsules T 4: 750000 T0 Large Capsules: 300000 Inlet Height: 736.0 mm Outlet Height: 1150.0 mm

DWM Copeland compressor -Type: D8DH5-500X-AWM/D - Flow rate: 151 m3/h -Cooling capacity: 103.4 kW at -5°C/40°C, 85.3 kW at -10°C/40°C, 44.5 kW at -25°C/40°C -Refrigerant: R404A -Stock: 1 piece -Stock number: S 254 -Condition: Used, very good, ready to work

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

: 0,728 m³/min 0: 10 bar engine output: 5,5 kW turning speeds: 3.000 U/min dimensions: 2,0 x 0,8 x 1,35 m weight: 400 kg Power-On hours = 7,340 h. -BOGE screw compressor -BOGE energy-saving refrigerated compressed air dryer DS9 -BOGE automatic condensate drain -BOGE compressed air receiver with 500 l capacity. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Duplo 10/60 air suction feed collators: with 2.5 mio. cycles and with 1.2 mio cycles. LUR connecting unit for the stacker. Stacker: DBM-400 STR with 1.2 mio. cycles connecting bridge between the 2 vertical towers. Manuals, serial communication cable, E-cable In production ready condition, clean and tested. Available immediately.

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Year of manufacture: 2016 -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 1 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 10,000/2,500/H1,030 mm -Weight: 3080 kg

Key data: 550 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 55A injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Key data: 500 kN, 25 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 375V 500-100 injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the has ...

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding JONES & SHIPMAN 540 L Travel X: 406 mm Travel Y: 470 mm Travel Z: 168 mm Year of construction: 1981 Magnetic chuck dimensions: Length 355 mm x Width 150 mm Grinding wheel diameter: Ø 180 mm Spindle motor: 2 speeds motor Motorised raising/lowering Equipped with: Lubricant tank Voltage: 220 V Tri Dimensions (L x W x H): 1300 x 1300 x 1900 mm Total width with lubricant tank: 2000 mm Weight: approx 1,2 T

M.T.A. TAE 502 – Industrial Chiller / Process Water Chiller / Chiller For sale is a used industrial refrigeration unit M.T.A. TAE 502, built in 2003. The cooling unit was used as part of an industrial TRUMPF laser system and was used to cool the laser system. Technical data according to the nameplate: Manufacturer: M.T.A. SRL Model No.: TAE 502 Year of Make: 2003 Serial number: 2200 018 351 Voltage: 400 V Phases: 3 Frequency: 50 Hz Max. current consumption: 100 A Installed capacity: 59.0 kW Degree of protection: IP54 Max. operating pressure water circuit: 6.0 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant charge: 2 × 15.0 kg Max. refrigerant pressure: 22.6 bar LP / 28.0 bar HP Permissible ambient temperature: 5–40 °C Weight: approx. 1,430 kg The device is currently in storage and is not connected. An up-to-date functional test or demonstra ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology (IE3 drive motor) ⦁ Electronic pressure balance ⦁ Measuring system: With centered glass scales and temperature compensation. ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges. Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control options ⦁ TRUMPF TASC 6000 ⦁ Network connection mach ...