frame 5 used for sale

VERTICAL BALLER FOR SALE OR RENT! (Rental available in Lithuania, Latvia, Estonia, and Poland)! Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Roll Size: 1200 x 800 x 1200 mm Roll Weight: approx. 500 kg Max. Roll Size: approx. 1200 x 800 x 1200 mm (W x D x H) Pressing Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE AVAILABLE UPON REQUEST!

Aircooled chiller/Heat pump TRANE RTMA170 594.2 kW / 675.7 kW Cooling capacity: 594.2 kW / 168.96 tons (12/7 — 35°C) Heating capacity: 675.7 kW / 192.13 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. 4-pipe system (Hot/chilled simultaneous water production). Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH51-140-538Y (screw) Type of refrigerant: R134а Number of fans: 12 pcs. (Frequency inverter) Dimensions: 7.56x2.25x2.4 m. Weight: 8005 kg Working hours: 11801/2195 h. Condition: Good

500 litre stainless steel tank cylindrical standing stainless steel tank Polished interior Hinged lid on the top floor Cone

Incubator Manufacturer: Heraeus Type B 5090 E Glass doors Nominal temperature 70°C, 220 volts

Heating cabinet Manufacturer: Memmert Type: UM 500 Features: Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

x-travel: 510 mm y-travel: 510 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x548 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Antriebsleistung Spindel / drive capacity spindle 11 kW Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. format 36.50 x 52 cm Year of construction 1998 Shed Feeder Ryobi Film Dampener SuperDampener Cooling unit MGE ECO Plate quick-clamping rails Dry pollinator Delivery date: immediately from location

Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 500, Control panel: Stainless steel Control box, Controls, Thermomete ...

MIG-MAG Welding Machine Messer Griesheim Euromag 50 to 500 Ampere with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 80 - 500 A. Welding voltage MIG 18 - 39 V. Max. welding current at: 60%ED 500 A. Max. welding current at: 100%ED 380 A. Water cooling. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim / EWM Euromag 50 to 500 Ampere – Shielded Gas Welding Machine - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 2-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 4-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

DELTA LC 500 - Rotary Table Grinding Machine -CE marking -Year of construction 2011 -Magnetic Plate - Rotary Table 500mm -Max. grinding diameter 500mm -Distance column -Grinding spindle axle 315mm -Grinding height max. magnetic clamping plate - Grinding wheel 215mm -Speed grinding spindle 2840 rpm -Fine adjustment over micron 0.01mm -Rough adjustment (height adjustment) motorized via keyboard -Spindle motor 3 KW -Dimensions of the cup wheel 200x80x78mm -Machine enclosure -Coolant device -Documentation Dimensions: LxWxH 1.3x0.8x1.8 meters / Weight 800Kg

Technical data of the firewood rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,380 mm Number of fields per row of shelves: 01 pcs. Number of shelves plus floor level: 05 pcs. Note: We offer the shelf without firewood The firewood is for decoration purposes only. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. lattice walls Mesh size: 50 x 50 mm The stands are pre-assembled 2,000 mm high 500 mm deep 05x Grating floor, used Material colour: hot-dip galvanised Total depth: approx. 482 mm (bearing bar direction) Overall width: approx. 1,270 mm (crossbar direction) Bearing bar diameter: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm ...

Guild Master CTX 510 Control: Siemens 840 D with Shop - Turn Year of Make: 2004 Travel X / Z: 300 / 1050 mm Revolver: 12-speed Tool holder: VDI 40 Bsbmezmxz Roknrzodf Spindle speed up to: 3,500 rpm Bar passage: 90 mm Quill travel: 150 mm Tailstock Cooling 20 bar Chuck size 315 mm Spindle hours approx: 14,000 Batch sizes from 0 - 5 were produced on the machine Programming was done on the machine

Removal of label from the top with label dispensing system AVERY type ALX734LH, Sold with its stainless steel mast., Labeler / Stickerer AVERY DENISON type ALX 734LH :, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, Minimum label deposition height (mm): 1225, Maximum label deposition height (mm): 1400

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder, mounting bracket -Manufacturer: item, Mounting bracket ZnAl4Cu1 3 pieces -Type: 539.62 -Submission/Price: complete -Dimensions: 80/40/H80 mm -Weight: 0.3 kg/pc.

GLATT coating turbine, Glatt GC 750/500 enrobing machine from 1994 with interchangeable drums, explosion-proof version (Ex), - Processing equipment: Glatt GC 750 Coater (equipment used only for testing), - Perforated drums (diameters 500 mm and 750 mm) with:, Air intake and discharge housings for both drums, Drum capacity 750 mm: 50 – 75 kg/batch, Drum capacity 500 mm: 15 – 45 kg/batch, - Manual unloading, - Spray arm with nozzle adapter, Spraying system with 1 Schlick nozzle, - Control cabinet (pneumatic/electric) with Siemens S5 PLC, - Air handling unit (AHU) 7AIR comprising:, - Inlet air fan, - Filtration F7 and H12, - Preheating, - Dehumidification, - Heating, - HERDING Dust Collector, - Outlet air fan, - WIP spray nozzle (in-place cleaning) inside the drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, Air  ...

Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.

Stainless steel tank horizontal Manufacturer Capacity 5000 litres single-walled Dimensions: Diameter 1.60 m Length approx. 3.70 m

CONTROLS   CNC controls ROEDERS WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   .. among of them simultaneous CNC axes: 3   X-axis travel: 500 mm   Y-axis travel: 450 mm   Z-axis travel: 300 mm SPINDLE / HEAD   spindle revolutions (max): 42000 /min   tool fixture: HSK A40 TOOL MAGAZINE   number of positions: 40 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3500 mm   space requirements -front/back-: 3000 mm   total height: 2750 mm   total weight approx.: 9500 kg ATTACHMENTS   zero-point workholding system: yes   central lubrication system: yes   closed cabin: yes   European CE standards: yes Equipment: - Renishauw OMP400 - Megatool base clamping plate - Control update 2022 Special features: - Hydrostatic X, Y & Z axes - Coordinate grindi ...

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, radio remote control, radio remote control, crane radio system -Manufacturer: HBC radiomatic, crane radio transmitter receiver -Type: FSE 514 -Scope of delivery: as shown in the pictures -Price/Fee: complete -Transport dimensions: 400/300/H60 mm -Weight: 2.7 kg

A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 € : 897.13 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm  ...

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : Dm. 200x78x78 mm : 2800 1/min : 300 mm : 300x150x55 mm : 350x150 mm : 500x160 mm : 3.6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain t ...

Qty. 1 Second-hand extrusion press Mfc.: TBA Force: 85 MN Type: Loading Single action short stroke Built: 2026 – Never used! Billet dia.: 520 mm x 900 - 1800 mm L Ready for painting according to buyer’s requirement. Ready for shipment! All missing parts of the complete line can be also quoted, if requested. SCOPE OF SUPPLY 85 MN short stroke single action direct extrusion press Hydraulic type loader Billet-transfer loader Scrap-transfer device Billet lubrication device Extrusion tool Scrap Knocker Die shuffle Die Pusher Hydraulic System Electric System Spare parts

ENGEL DUO 500 T type 4550/500 pico Force de fermeture : 500 T / 5000 KN Année : 2013 Nombre d’heures : 48 000 h Diamètre vis. : 90 mm Volume injectable : 2480 cm3 Entre colonnes : 830 x 915 mm Dimensions des plateaux : 1270 x 1260 mm Epaisseur moule min/max : 350/900 mm Ecart maximal entre plateaux : 1650 mm Dimensions : 7,80 x 2,40 x 2,36 m Poids : 14 T + 7 T

EBA 550, year: 2000 by estimation, cutting width: 550 mm, hydraulic cutting, hydraulic pressing, digital read-out programmable, single phase 240v, safety hood in front, safety hood on the back, spare knife

Binding machines, Rilecart B-599 Automatic Wire Binding Machine (2000), The machine is in working condition and available for inspection upon request., This Rilecart B-599 has been running reliably without any issues., Key Features:, Year: 2000, split frame for entering small spaces (330 x 70 cm & 193 x 70 cm), Works with spooled double loop wire, Compatible with both 3:1 and 2:1 pitch wires (from 1/4 to 1-1/4), Binding size: min. 100 x 80 mm, max. 450 x 600 mm, Dedicated tool sets required per wire diameter, Productivity: up to 4000 pieces/hour (actual output depends on product type and production setup), Skip-binding function (up to 5 gaps), Dual wire unwinder system for minimal changeover time, Optional: Hanger feeder with integrated former. (not included), including the following sets of tools:, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 3/4”, 7/8�

Universal cutter, Make Konrad Ströbel, Model 500, Year 1970, Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), New ball bearings for the electric motor, New overload protection main switch, Available direct, Knives included: the machine comes with a index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), Voltge:: 380 volts

Rilecart B-599 Automatic Wire Binding Machine (2004), The machine is in working condition and available for inspection upon request. This Rilecart B-599 has been running reliably without any issues. It has been well maintained and upgraded with several valuable features:, - Safety light curtains installed, - Pneumatic pressure adjustment for the carremata, Modified wire unwinding system for improved handling, Key Features:, - Year: 2004, - Works with spooled double loop wire, - Compatible with both 3:1” and 2:1” pitch wires (from 1/4” to 1-1/4”), - Binding size: min. 100 x 80 mm, max. 450 x 600 mm, - Dedicated tool sets required per wire diameter, - Productivity: up to 4000 pieces/hour (actual output depends on product type and production setup), - Skip-binding function (up to 5 gaps), - Dual wire unwinder system for minimal changeover time, - Optional: Hanger feeder with integra ...

Hugo Beck Flexo 500 S – Shrink Wrapping Machine, Machine details:, - Model: Flexo 500 S, - Manufacturer: Hugo Beck, - Year of manufacture: 04/2006, - Power supply: 400 V / 50 Hz, - Power rating: 3 kW, - Rated current: 5 A, Description:, Robust and reliable shrink wrapping machine from the well-known German manufacturer Hugo Beck. This Flexo 500 S, built in April 2006, is in good and working condition. Ready for immediate use in production environments and suitable for a wide variety of packaging applications., Machine can be viewed in operation by appointment

Gluing machine, Make Essor, Model 500, Year 1980´s, Working size 500 mm, Glue cold PVA glue, Substrates for both sheets and board, Details the displayed refurbished machine is an example, I5542423 we can deliver up to 2 identical machines, Working size: 500 mm, Glue: cold PVA glue, Substrates: for both sheets and board

Specification Injection Molding Machine Demag Systec 210/580-840 (Servo) General data Clamping force: 210 t Year of Make: 2019 Control: NC5 / MC5 Clamping unit Size of the clamping plates: 860 x 860 mm Lights spar spacing: 580 x 580 mm Opening travel: 790 mm Ejector travel: 180 mm Injection unit Screw diameter: 60 mm Injection volume: 636 cc Injection weight in hp: 579 g Spec. Spray pressure: 1352 bar L/D Screw Ratio: 20 Facilities Pump drive power: 26.0 kW Servo motor drive Bimetal, wear-resistant screw Flexible clamping unit with multiple ejector and core movements Ejector with position control Injection with control pump (p+v-controlled, closed loop) Pressure return system (RSP), 3-part Reinforced oil cooling system (supply up to 35 °C) Location: Aachen, Germany

Sandt large-area die-cutter, 150 tons printing capacity, 2 columns, with fully automatic feeding for roll goods (10 to 20 rolls depending on material thickness). The punching width is 1,600 x 900 mm

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Interface module: 48-pin -Circuit board: Type P7127J 536/1 -Number: 3 modules available -Price: per piece -Dimensions: 150/70/H65 mm -Weight: 0.2 kg/pc.

General SKU214W272 MakeQVF Glasstechnik TypeS-ROB45/300/SH/3SIC No.98087 Year of construction1998 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface4.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface4,5m³ Tube capacity22 ltr Number of tubes:128 Tube diameter14 mm Tube length1000 mm Wall thickness tubes1,5 mm Max. temperature+150°C Shell capacity53 ltr Shell diameter300 mm Shell length850 mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150 2x Cover connectionsDN80 2x MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) General Floorspace0,42x1,40m Total height0,42m Weight190kg Extra information Ext ...

table diameter: 500 mm table load: ? t table height: hor. 235 / Sph. vert. mm groove width: 18 mm total power requirement: - kW weight of the machine ca.: 0,270 t dimensions of the machine ca.: 800640235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 685 mm width: 460 mm height: 115 mm T-slot - width: 10 mm T-slots: 3 Stück Payload: 40.0 kg width: 315 mm length: 340 mm travel -x axis: 285 mm travel -y axis: 140 mm manual control device: 0,04 Nonius mm weight: 45.0 kg Properties: - for light milling work on table or crevice drilling machines - Ground clamping surface - Dovetail guide adjustable by means of wedge lines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...