frame 5 used for sale

Croissant machine POLIN, type: Gruppo Croissant 530 Avant "C" -In very good condition- - Calibration unit with belt - Longitudinal section - Cutting knife / guillotine - Winding unit - Belt of the croissant machine would have to be changed - Condition: Very good, little used - Videos can be sent Visits and test runs are possible by arrangement.

Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.

cutting width: 55 cm feeding depth: 57 cm feeding high max.: 9,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Display Diane PP450.0571-K01 | Jenbacher original 541065 - NEW OPTIONAL ITEM: Interface card 3IF779.9 B&R -Jenbacher original 442076 - NEW = 740,00 €

Key data: 500 mm

Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

turning diameter over bed: 1600 mm turning diameter over slide rest: 1280 mm turning length: 5000 mm centre height: 800 mm spindle turning speed range: 1 - 200 U/min spindle bore: 105 mm spindle diameter in front bearing: 120 mm main drive motor: 75 kW max. workpiece weight between centres: 30000 kg workpiece weight in steadies max.: 40000 kg bed slide rapid adjustment: 4000 mm/min. total power requirement: ca. 100 kW weight of the machine ca.: 52 t Refurbished in 2020 and equipped with: - 4-jaw faceplate Ø 1600 - thread cutting - 4-fold heavy duty tool holder - Hardened tracks - tailstock diffenret Steadies, chip conveyor and other accessories, available upon request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mm greates pass round over bed: 490 mm turning dia. over face-slide: 280 mm control: Heidenhain Manual Plus Speed range - up to: 3000 U/min spindle bore: 65 mm power capacity - workpiece power: 12/16 (100/60%) kW weight of the machine ca.: 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 500 mm -Photographs: 15/12 mm see photos -Quantity: 48 pieces available -Price: per piece -Dimensions: Ø 60 x 530 mm -Weight: 2.2 kg/pc.

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

Aircooled chiller YORK YGT550HE 535.3 KW Cooling capacity: 535.3 kW / 152.2 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Leak detector Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH9663-160Y-40D (screw, inverter) + 1 pcs. Bitzer CSH9663-160Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 10 pcs. (EC-fans) Dimensions: 6.2x2.16x2.66 m. Weight: 6297kg. Working hours: 0/0 h. Condition: New

This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details.

Spiral mixer Sinmag KM-50T Condition: used, functional Year of Make: 2011 Suitable for max. 25 kg flour or 50 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

CNC hydraulic press brake Type: TruBend 5130 Manufacturer: Trumpf Year: 2007 Controled axis: X,R,Z1,Z2,Y1,Y2 Pressing force: 130 t Working length: 3000 Stroke: 445 mm Working pressure: 300 bar Machine weight: 10900 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm

Seed station Lippelt Moli 580 Working width: 580 mm Single-sided seed application 1x Spreader container with brush 1x spreading container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seed to the dough pieces Mesh hinges, pull-out Mobile seed collection container Control with start/stop button, 2x potentiometers for belt speed and spreading rate and emergency stop button

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments

ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

Professional packaging machine from a renowned European manufacturer, equipped with many options and adjustment options. Suitable for packaging food (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Setting options: -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrink time adjustable. -Holding time adjustable. program memory. Other characteristics: -Needle perforation via adjustable needle rings possible. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter approx. 300 mm. -Maximum film roll length approx. 600 mm. -The machine can be pushed or fixed via lockable castors. Special features/ options: -Automatic residual film rewinding -Second foil ro ...

Professional packaging line from a renowned German manufacturer. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. -Packaging output up to approx. 16 packs per minute. -Dimensions of the welding rail approx. 580 x 440 mm. -Tunnel opening approx. width 510 x height 230 mm. -Maximum package size theoretically about L 580 x W 440 x H 230 mm. -Maximum film roll width 550 mm. -Perforation of the film via 2 adjustable needle rings possible. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. machine can be moved and locked with castors. -Approximate dimensions of the machine: length 2.5 x width 1.2 x height 1.6 m. -380 V/ 5.5 KW. Setting options on the display: tunnel temperature. -Welding temperature. -Conveyor belt transport time. -Roll ...

Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT

Block size: max 1200 x 640 x 380 mm, Cutting width: 680 mm, Thickness: 10 - 60 mm, Compressed air: 6 Bar, 500 L/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3400 x 1300 x 2650 mm, Weight: 2500 kg

CFS CUTMASTER 325V & 500V

Complete packaging line for paper sacks (20kg) including palletizers and pallet stretchers. For bagging of e.g. horse feed. The plant is still in operation until November 2026 and can be visited.

General SKU265Y405 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume500 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity677 l. ( 500 l. ) Vessel sizesDia. 900x1186 mm Dished bottomcheck Dished top sidecheck ManholeDN400 Top connectionscheck OutletDN60 Half coil jacketedcheck Max. temperature-5/+95°c With propellor stirrercheck Motor1,5 kW (400V, 1461/161 rpm (Ex)) Speed mixing shaft161 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General MakeGoavec Serial03AQ 023 Year of construction2003 Mounted on legscheck Floorspace1,2 x 1,2 m Total height2,8 m Weight350 kg Extra information Extra Specifications- Bio reactor 677 l Stainless Steel reactor, 3,8 bar int. 3 bar jacket, 126 °  ...

max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

-Striebig -Standard II TRK, 5220 A -Year: 1998 -No.: 28351 -was acquired refurbished! Shipping available on request. Sale only to tradespeople. Stated purchase price = Net plus 19% VAT = €13,708.80 Gross

ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details.

Lippert roller conveyor 1620-570-500 RA2511 Make: Lippert Roller width (RB): 500 mm Nominal width/outer width (NB): 570 mm Length: 1420, 1620, 2100 or 2700 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: Interroll Drummotor Electrical data: 24 V Frame height: 105 mm Conveyor speed: Speed controll with Interroll Motorcontroller Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) nominal voltage: 24V Conveying length in mm: 1420, 1620, 2100, 2700 Nominal / outside width in mm: 570 Roll width in mm: 500 Roll division in mm: 76 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone o ...

This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details.

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price

This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details.

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation

Key data: 800 mm, 590 mm, 480 mm

Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories

Key data: 550 mm, 1500 mm

Mixing mill 550 × 1500 mm, manufactured by Bata in 1937. This historic machine is fully functional and can be used both in production and as an exhibition piece.

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Machine name: Replacement rotor for Alfa Laval Manufacturer: Alfa Laval Type: ALDEC 506 Year of manufacture: - Inner diameter drum: 450 mm Inner drum length: 1,240 mm Material: Stainless Steel Dimensions: Curb weight: 1,000 kg Technical documentation: No Condition: Used good Price: On request

Capacity: 2500 kg / h, Heating: steam, Cooking time: 120 min

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers