frame 5 used for sale

Berief” drum blancher Type Jumbo KODUKO 16/500 continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating nett length ± 11 m all stainless steel adjustable speed variable dwell adjustment steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with conveyor belt with elevating spiral screw for loading

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

Various Ruettel motors vibration motors Weight from 10kg to 80kg/stueck Three-phase current 500Volt; Unused Special price

Corrosion protection rectirichtere REctimen Rectiveranel Manufacturer Martin, Velbert Type TG 50/50 Mains 220V 50HZ 15.6A Output 0-50V max 50A Transformer according to VDE 0550 with hardened insulation Type ETO Lstg. kVA 3.4 Prima220 V 15.6A Sekundaer 60V 56A Controller Preussler 22160/80.11 Display of the protective current 0-60A Special price

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.) ; working condition

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Upright stack delivery with pressing unit; working condition

DYNABOX 500 - 230V 50Hz DYNAJETten with system: the powerful hot water unit Dynabox 500 with up to 500 bar working pressure is the ideal addition to all DYNAJET trolleys. Simply on the Connect the high-pressure side between the high-pressure cleaner and the cleaning tool and already achieve results with up to a maximum of 95 °C hot high-pressure water that can be achieved with conventional Cold water cannot be reached. Of course, the Dynabox 500 is also characterized by its low weight, small dimensions and easy loading and Transportation options. BASELINE System hot water generators Type Trolley/Box Pressure class 500 bar Pressure adjustable No Pressure minimum 40 bar HYDRAULICS Minimum flow rate 7 l/min Maximum flow rate 15 l/min THREADED CONNECTION Input connection M24x1,5 AG Output connector M24x1,5 AG DRIVE Voltage and frequency 230 Volt AC 50Hz Volume  ...

Newtec Model: 5000C checkweigher roller conveyor serial: 1491 weighbed 350mm x 330mm, with roller outfeed conveyor, weight ranges from

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Axial groove ball bearing Steyr 51220B (7 shards)

Zentrifuge Cepa Padberg GZ 500, BJ. 1994,approx. 100 kg per batch, 750 rpm Next: CEPA Padberg GZ 500 E, BJ 1994, with 125 kg swivel crane VETTER See pictures below