frame 5 used for sale

sheet width: 4040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: m Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal support Side fence and table extensions Cut length limiter Cut edge lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krpan 4.5 E forestry winch, shield width 1.42m, pulling force 45 kN (4.5t), braking force 56 kN, 70m Ø 9 mm compacted rope, rope speed 0.6 m/s, weight without rope 350 kg, ! Required tractor power: 35-45 kW / 48-60 HP

Schäffer 5470Z wheel loader, Technical data:, - Year of construction: 2022, - Operating hours: 450h, - Operating weight cabin with standard equipment, driver and standard bucket: 5,215 kg, - Lifting capacity: 3,600 kg, - Flow rate / option: 64 l/min / 74 l/min, - Pressure: 210 bar, Equipment:, - volume scoop, - pallet forks, - hydraulic quick coupler, Dimensions [see image in attachment]:, - (A) Wheelbase: 2,050 mm, - (B) Chassis length: 4,700 mm, - (C) Total length with standard bucket: 5,250 mm, - (D) Digging depth: 80 mm, - (E) Working height max.: 3,900 mm, - (G) Loading height with pallet forks: 3,120 mm, - (H) Max. discharge height: 2,500 mm, - (I) Height of front end: 1,530 mm, - (J) Dumping range: 420 mm, - (K) Seat height: 1,340 mm, - (L) Height cabin / option: 2,570 / 2,450 mm, - (M) Lifting height (tool pivot point) max.: 3,250 mm, - (N) Total width series / option: 1,740 - 1 ...

50 cm width, receiving width: 20.5 cm, shaft spacing: approx. 20 cm, shaft diameter 40 mm

Technical description : DIESEL TRACTOR TRUCK - Weight 7.200 kgs - Length 3000mm - Width 1500mm - Height 2200mm - Axle interspace 1200mm - Track width 1000mm - Ground clearance 200mm

turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

This 3-axis Röders TEC RHP 500 was manufactured in 2006. It features a high spindle speed of 42,000 rpm and a tool magazine capacity of 42 slots. The machine is equipped with hydrostatic X, Y & Z axes and includes a coordinate grinding package. If you are looking to get high-quality machining capabilities, consider the Röders TEC RHP 500 vertical machining centre we have for sale. Contact us for further details.

; Power [PS]: 68; Gross weight [kg]: 1600; Engine: Battery System: LIFePO4

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Transport weight [kg]: 840

Heidelberg SM 74-5PH Year: 1997 Counter: 129mio Size: 52x74cm Autoplate Alcolor Technotrans cooling All auto. Washers IR dryer CPC 1.04 Cptronic Alphatronic powdering

Maximum sheet size: 320 x 457mm Minimum Sheet size: 120 x 210mm Up to 4000 sets per hour in collating mode Unique air separation on AC/ACF units Easy to programe memory function for repeat jobs Compatible with the BM61/2000S booklet making systems

Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife

Injection moulding machine for food and beverages caps

1 gebr. Boiler ------------------------------------ - mounted on frames - Manufacturer : LOOS, International Type : UL-S Capacity : 5,000 kg/h Operating overpressure : 18 bar Steam temperature max. : 204°C Year of manufacture : 1993 equipped with Weishaupt gas burner G50/2-A, ZM, gas control section, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment.

Clamping Force: 200 ton

New Part Number: 0209 2231 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0209 2230 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Injection moulding machine for PET preforms

Screw Diameter: 50 mm // Throughput: 150 kg/h

Container Size (Max.): 2,5 l

A Hamba cup filling machine is available. Lanes: 4, max. cup diameter: 127mm, max. cup height: 130mm, nominal capacity: 9600cups/h. Machine dimensions X/Y/Z: approx. 10000mm/1700mm/2500mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.

Sica Starbell Ce Ud Dswmrgvovycshd

Washing machine Ultron UNPRZ-500 MPS No 21/9/0619 Year of manufacture 2022 Temperature control range washing, rinsing 20-80C Max Drying Temperature 100C Usable tunnel height 300mm Width 500mm Power of the washer heater 45.6kW Rinse aid heater power 53.2kW Power of the drying units 24kW Drying fan power 26kW Nominal power 185kW Weight 4000kg

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Turbine Control Woodward 505 Turbine control, built in 2007 of 2600 KW Condensation turbine with 0 operating hours 1 available. 3.3 KV / 100 V, 50 Hz, 626 A Price: 6,900 €, plus VAT, FCA-free. Turbine Control Woodward 505 Manufacturer: Woodward Type: Turbine Control Rated power [KVA]: 3,575 Voltage [V]: 3.3 KV / 100 V Frequency [Hz]: 50 Operating voltage [V]: 24 Rated voltage [A]: 626 Year of Make: 2007 Dimensions [m]: 1.60 x 0.60 x 2.00 Weight [kg]: 500

Turntable diameter: 1640mm, max. pallet height: 2000mm, max. film width: 500mm, max. film roll diameter: 300mm, max. film core diameter: 76mm, film thickness range: 17µm-35µm, max. roll weight: 20kg. Machine dimensions X/Y/Z: 2800mm/1650mm/2800mm, weight: approx. 450kg. An on-site inspection is possible.

PROCESOR ECO LOG MODEL 580F BUILT IN 2021 OPERATING HOURS 1100

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Key data: 1050 mm, 560 mm, 460 mm

Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

Pusher force: 120 t, Open box dimensions: 5000 x 2400 mm, Bale size: 800 x 600 mm, Engine: Electro, Engine power: 90 kW, Year of construction: 2011, Hydraulic: Parker Pumps and Valves, Operating hours: 7500 h

Key data: 1050 mm, 560 mm, 460 mm

incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

Single-station machine up to 8 ltr. Extruder S 90/20D. Single head with viewing strip. With leak tester and conveyor belts. Good condition

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

General SKU366W1229 MakePfaudler-Werke No.209769 Year of construction1970 LocationBarneveld Pressure Working pressure1.5 Bar Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume576 Ltr. Pressure1.5 Bar Specified Features - Pressure vessel Capacity576 l. Vessel sizesdia. 1000x700mm ManholeDN200 Top connectionscheck OutletDN60 Max. temperature200°C With jacketvolume 6 l. Max. temperature200°C MaterialGlass With jacketcheck General Mounted on consolescheck Floorspace1,0x1,0 m Total height0,40 m Weight740 kg Extra information Extra SpecificationsVolume 115 l., allowable temperature 200 Generic medicinesPressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIPfaudler-werkeIndustries > Pharmaceutical > Generic medicinesTanks > Pre ...

A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

General SKU004B043 MakeAltmayer Rehlingen/Waeschle TypeZGB 200.1-4.5-AC No.68435/10 Year of construction1997, Valve has never been used LocationBarneveld Material Housing materialCast aluminium hard-coated Rotor materialStainless steel Main Features MaterialAluminium/Stainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Rotating valve Rotary valve(1x) Rotor diameter200mm Rotor width180mm Inletdia. 160mm Inlet flange sizesdia. 280mm Installation height360mm With motor0,37 KW, 230/400 Volt MaterialAluminium, Stainless steel General Floorspace0,6x0,6 M Total height0,6 M Weight40 KG Extra SpecificationsMax temperature 70 degree C Technical specs Extra informationMax temperature 70 degree CPowdered foodsGeneric medicinesStarchRotating valvesTea, herbs & coffeeFine chemicalsAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other ...

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

General SKU269W395 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Powdered foodsStarchOintmentsFine chemicalsRubberAgrochemicalsPlastic & polymersSilosCatalysts & fillersFeed additivesDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPaints & coatingsSartorius Stedim SystemsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Pharmaceutical  ...