frame 5 used for sale

Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. No. 76-63756 The 7600 is part of ABB's most powerful range of heavy-duty industrial robots. Payload 500 kg at 2550 mm radius. The IRB 7600 is ideal for demanding applications in all industries. Typical areas of application are the handling of heavy fixtures, the turning of car bodies, the lifting of engines, the handling of heavy parts in foundries or forges, the loading and unloading of machine cells and the handling of large and heavy pallet layers. This robot is equipped with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen design and a 3D joystick for intuitive operation. Powerful, customizable application support allows you to load RAPID programming language RAPID Programming offers the perfec ...

Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. No. 76-63750 (28670 operating hours) The 7600 is part of ABB's most powerful range of heavy-duty industrial robots. Payload 500 kg at 2550 mm radius. The IRB 7600 is ideal for demanding applications in all industries. Typical areas of application are the handling of heavy fixtures, the turning of car bodies, the lifting of engines, the handling of heavy parts in foundries or forges, the loading and unloading of machine cells and the handling of large and heavy pallet layers. This robot is equipped with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen design and a 3D joystick for intuitive operation. Powerful, customizable application support allows you to load RAPID programming language RAPID Programm ...

; Power [PS]: 598; Gross weight [kg]: 4700; Engine: Iveco CURSOR13TE6; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 775

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842

; Gross weight [kg]: 18290; Engine: Caterpillar 3516B HD; Accessories: Control Panel, Caterpillar 3516B HD Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

Automatic Transfer Switch - ATS Panel - ATI Panel, 800 Ampere - Applicable for generators up to 550 kVA; Gross weight [kg]: 110; Registration Number: 2

; Gross weight [kg]: 1414

; Power [PS]: 170; Gross weight [kg]: 2750; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

; Power [PS]: 170; Gross weight [kg]: 5500; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

; Power [PS]: 170; Gross weight [kg]: 11000; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

; Gross weight [kg]: 5029; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 760

; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

; Power [PS]: 598; Gross weight [kg]: 4860; Engine: Volvo TAD1346GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 900

used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...

Availability: as of now Machine dimensions (LxWxH): 0.8 x 0.8 x 2.0 m Weight: 150 kg Bottle drying system was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Consisting of: - 1 Paxton high-performance centrifugal blower XT 500 4kW - 2 stainless steel heavy-duty air blades 580mm lg. - 2 stainless steel air blade holders for Adjustment in 3 levels - 1 stainless steel base frame with attached Blower - 1 stainless steel air distributor 2 x DN 76 mm - 1 soundproof enclosure for XT 500 blower - 4 stainless steel covers on all sides as Splash guard Additional equipment: - 1 pc. Geset stainless steel nozzle 40 x2 mm incl. piping and hose For lid blow-off before inkjet The Gesete XT 500 bottle drying machine was manufactured in 2014 and is designed for drying bottles in front of a labeling machine (Etima) ...

Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg

This 3-axis DN SOLUTIONS DNM 5700 was manufactured in 2024. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 × 570 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 5700 vertical machining centre we have for sale. Contact us for further details.

Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.

The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...

This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details.

This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details.

A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.

A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible.

The steam boiler plant was put into operation in February 1992 and has been running smoothly for the entire service life since then. The steam boiler has a capacity of NW 7170 ltr and is operated with a maximum operating overpressure of 10 bar. It can run on oil and gas. The steam boiler was regularly serviced and inspected by the TÜV. The last TÜV inspection took place in 2018 without any complaints. The steam boiler has been filled with treated water since its decommissioning in 2019 and can be dismantled and transported away immediately. The closure took place due to a plant closure. The complete documentation is available in the original. Further information, including price, can be requested by calling 0345 6868-0 or infonovachem

A Hommel bread waste shredder for the food industry is available. Motor power: 5.5hp, machine dimensions X/Y/Z: approx. 700mm/700mm/1550mm, weight: approx. 55kg. An on-site inspection is possible.

; Gross weight [kg]: 2924; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm -Weight: 10.1 kg

; Gross weight [kg]: 3886; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

; Power [PS]: 598; Gross weight [kg]: 7885; Engine: Cat C18; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built in switch 50/60 Hz; Water Tank Volume [l]: 1125

; Gross weight [kg]: 690

We offer an absolutely top forklift from Jungheinrich, it was completely refurbished by Jungheinrich in 2021 with 5 stars and has only run for 45 hours since it was refurbished. The paint is original and has not been overpainted or repainted! The forklift has always been in the hall and is in top condition Maintenance and UVV is up-to-date. Manual and keys are of course available Last major maintenance was in October 2024 UVV until 10/2025 Operating hours 7792 (since refurbishment 7744) TFG 540s SP G+E 120-565 DZ Type : LPG Forklift Year of manufacture 2012 / 5 stars Refurbishment 03/2021 complete with Kaup fork positioner T466 Load capacity 4000kg Lifting height: 5650mm Overall height: 2640mm Fork length: 1600mm Load center of gravity: 500mm Mast: Gripping Axle incl. Free Lift Equipment: Solo-Pilot, STVZO lighting, LED version 2 work lights each rear and front, fro ...

Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.

turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,51,21,6 m Machine has been partially overhauled Among other things engine renewed ( 8.000 EUR ) The repair was not completed due to plant closure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 0 mm workpiece length: 0 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crack testing device for large series of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Dimensions: see photos / technical drawing -Quantity: 1x mounting cube available -Dimensions: 500/300/H300 mm -Weight: 89.7 kg

We offer a highly productive 3D printer for industrial series production The system was finally used with aluminum powder AISi10MG The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck TruPrint 5000 G4 Serial Number S0731C0008 Year of construction 08/2018 Time-of-Flight Laser Laser 1 Beam on On: 5165 hrs Laser 2 Beam on On: 5096 hrs Laser 3 Beam on on: 5023 hrs Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Poll Monotoring options included Filter system Accessories: 2pcs. Build Cylinder 3pcs. Dosing cylinder 1 pc. overflow tank used 1 Pc. Overflow Tank NEW Manuals 4 Heat Exchangers NEW 2 pcs Easy Filter NEW 3 pcs NTRON SIL ...

11092026 Cylindroconical Fermentation Tanks CCT 540 hl – Holvrieka Six identical cylindroconical fermentation tanks manufactured by Holvrieka in 2002. Each tank has a gross capacity of 672 hl and a net working capacity of 540 hl. The tanks are designed for fermentation, maturation and storage of beer (combi tanks) under pressure, with each tank was accommodating approximately three brews. The tanks are equipped with four independent cooling zones, allowing controlled product cooling throughout the fermentation and maturation process. The cooling system is suitable for operation with either a glycol solution or ammonia (NH₃), subject to the existing refrigeration system configuration. The cooling jackets have a pressure rating of 20 bar. Tanks are standing on their own legs. Each tank is insulated with 100 mm polyurethane foam to reduce thermal losses and maintain stable proces ...

This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details.

- Face plate 4 Chuck 3200 mm - Displacable table for swing 5100 mm - ATC tool chnager 16 positions - Heavy Duty Jaws - Table load 60.000 Kg - Power 75 kW   - ex Aero Space  - SCR Feed drives / each Axis own  - Ballcrews + Slide roller guideways -  Displaceable table hydraulic / manuel  - Circular interpolation