fp 16 used for sale

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg

Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap -Closure cover: with spring clamp -Price: per piece -Quantity: 11 pieces -Minimum order: 4 pieces -Dimension: Ø 180 x 45 mm -Weight: 0.4 kg/piece

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1 x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Electric motor, three-phase motor, brake motor -Manufacturer: AEG, electric motor Typ AM160 MV4 Ex -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 42 x 110 mm -Protection class: IP 44 -Construction: B3 -Dimensions: 550/340/H290 mm -Weight: 90 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, Standard cylinder type DSN-12-160-P -Stroke travel: 160 mm -Piston: Ø 12 mm (1.13 cm²) -Piston rod: Ø 6 mm/M6 -Dimensions: Ø 20 x 265 mm -Weight: 0.145 kg

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Pressure gauge: 0 to 160 bar -Dimensions: Ø 62 x 47 mm -Weight: 0.1 kg

Centrifugal pump with magnetic coupling. General characteristics: Manufactured by STERLING SIHI Model CBED 040160-165 CF2ET4B2N Type ATEX Year built 2006 Motor characteristics: Power 5.5 kW - 7.37 cv Frequency 50 Hz Rotational speed 2910 rpm

Cooling capacity: 600 kW Year of manufacture: 2007 Options: with economizer Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg Condition: excellent Product quantity: 1 pc.

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -wöhner: QCB NH00 160A switch disconnector -Price: per piece -Number: 2 pieces -Dimensions: 200/110/80 mm -Weight: 1.2 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Used spiral kneader DIOSNA, Type: SP 160 D -As good as new- - up to 160 kg dough / approx. 100 kg flour - Plastic cover available on request - Condition: Very good, ready for immediate use The kneader is in very good condition and is immediately ready for use. Viewing and test run are possible by arrangement.

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg

Bezel, steady rest, lynette -max. passage: Ø 250 mm -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm -Weight: 39 kg

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 160 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 325/53/H53 mm -Weight: 1.65 kg

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 160 mm -Height: 20 mm -Delivery of: steel/stainless steel cover plates possible -Number: 22x pillows available -Price: per piece -Weight: 0.5 kg/piece

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale used angle head, angle milling head ŠKODA

Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block

MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder - Stroke: 160 mm - Piston diameter: 40 mm - Piston rod: 16 mm -Price per piece -Quantity: 2 pieces -Dimensions: 325/55 / H55 mm -Weight: 1.40 kg / piece

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Mouth size: Ø 160 mm -without: interchangeable jaws -Central bore: mm -Dimensions: 320/230/H220 mm -Weight: 30 kg

Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 163 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 325/52/H52 mm -Weight: 1.6 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 160 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 2.7 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 160 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 292 mm -Weight: 0.3 kg/piece

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.