fp 16 used for sale

Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg

Guide bushing, plain bearing bushing, plain bearing, 26 pieces PAGUS 11x PAP 1215 P10 diameter: Ø 12 / 14 mm ( inside / outside ) < -br />width: 15 mm Material: steel, sliding layer of PFTE and lead ( P10 ) 15x PAP 1612 P14 diameter: Ø 16 / 18 mm ( inside / outside ) width: 12 mm Material: steel, sliding layer of PFTE and zinc ( P14 ) New ! Dimensions( packaging ): 140 x 140 x 70 mm

bevel gear -Speed: 50 Hz 166.9 rpm -Speed: 103 Hz 344 rpm -Type: M4B -Brake -Hollow shaft: Ø 40 mm -Protection class: IP 65 -Number: 1x available -Price per piece -Dimensions: 750/265/H220 mm -Weight: 62.4 kg

Interlocking SCHMERSAL AZM 161SK-12/12RK-024 1164207 Fmax: 2 kN Rated control supply voltage: 24 V AC / DC Breaking capacity: 230 V AC 4 A IP67 New ! Dimensions: 130 x 90 x 30 mm

Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...

variable speed gear, variable speed gear, spindle variable speed gear, DISCO variable speed gear -Manufacturer: Lenze, DISCO variable speed gear -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm with motor up to 0.37 kW / 1380 rpm -Dimension.: 228/163/H185 mm -Weight: 13 kg

Hydraulic tank vent filter ORSTA 16703 flange: 195 x 90 mm for filter cartridge: Ø 70 / 18 mm, height: 60 mm used, tested ! Dimensions: 195 x 90 x 138 mm

Hydraulic cylinders, double-acting MILLER J72R2B piston diameter: Ø 38,1 mm ( 1 1/2 inches ) rod diameter: Ø 25.4 mm ( 1 in) stroke: 160.3 mm ( 6.31 inches ) pressure: 172.4 bar ( 2500 psi ) rod thread: M12 x 1.5, Length: 10 mm 2x feet: 34 x 89 x 12 mm hole spacing: 234 / 70 mm 4x Bore: Ø 11.0 mm New ! Dimensions: 315 x 89 x 51 mm

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg

Sprocket, sprockets, sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1 x 17.02 mm 16B-1 -Shaft mount: inside O 50 mm -Measures: see drawing in the photos -Number: 5x gears available -Price per piece -Dimensions: O 628 x 58 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg

Gear motor electric motor Electric gear motor -Speed: 165 rpm -Power: 0.33 kW -Construction: B5 angle -Diameter shaft: 15 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 360/180/H190 mm -Weight: 11 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 160-254 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 11 kg

Light barrier, safety light curtain -Protective field height: 1650 mm -Protection class: IP 65 -2x receiver photocell type: C40E-1603CA010 -Price: per piece -Dimensions: 1780/40/H50 mm -Weight: 7 kg

Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 160 rpm -Power: 1.5 kW -Construction: B3 -Shaft: Ø 25 x 80 mm -Protection class: IP 44 -Dimensions: 495/250/H295 mm -Weight: 43 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: RSF Electronics -Type: MSA370.T4 -Dimensions: 1790/55/H38 mm -Weight: 5.5 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: Heidenhain -Type: LB302 -Dimensions: 1915/49/H63 mm -Weight: 7.2 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Diameter shaft: Ø 25 mm -Number: 7x available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 1600 kg load capacity -Dimensions: 525/130/H320 mm -Weight: 14 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 2.4 kW -Output: 165/110 V 294/194 Hz -Power: 3/2 KVA -for: edgebander -Dimensions: 680/360/H290 mm -Weight: 78 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg

DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380V 50Hz -Output: 165V 300Hz -Power: 25KVA -Dimensions: 800/400/H320 mm -Weight: 224kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 300 V 165 Hz -Power: 25 KVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear type: SK01-R1000-/1/L/4 -Motor power: 0.37 kW -Speed range: 33-165 rpm -Motor: adjustable -height of the shaft axis: 100 mm -Construction: B3 -Drive shaft: Ø 20 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 505/320/H195 mm -Weight: 23 kg

Gear motor, electric motor -Speed: 164 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 380/200/H185 mm -Weight: 15.5 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Three-phase motor, electric motor -Motor: is unused -Power: 160 kW -Speed: 2960 rpm -Shaft: Ø 65 mm -Protection class: IP 54 -Construction: B35 -Dimensions: 1190/920/H730 mm -Weight: 730 kg

Gear motor, electric motor -Speed: 27/54/168 rpm -Power: 0.18/0.37/1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 33 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Centering mandrel GÜHRING ZSB-1674653 W1150500-0001, 1674656, 15575 Overall length: 134 mm mandrel diameter: Ø 40 mm, length: 68 mm, inner diameter: Ø 20 mm flange diameter: Ø 75 mm, length: 50 mm guide bolts: Diameter: Ø 32 mm, Length: 16 mm, Inner diameter: Ø 24 mm used, tested ! Dimensions ( centering mandrel ): 134 x 75 x 75 mm Dimensions ( packaging ): 130 x 115 x 140 mm

Rubber Spring Buffer, Crash Buffer, Crane Rubber Buffer PAGUS TGL 35268 ( TGL35268 ) Diameter: 160 mm Mounting screws: M16 New ! Dimensions: 160 x 160 x 160 mm

Tank aeration filter REXROTH BLP 162 F 10 W 2.X ( BLP162F10W2. X ) R900024984 filter element: HYDAC 0160 MU 010 P flange diameter: Ø 83 mm pipe inner diameter: Ø 55 mm bolt circle diameter: Ø 72.5 mm 6x Bore: Ø 5.5 mm New ! Dimensions: 246 x 132 x 132 mm

Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-32A-120-2A article number: 405776 series: CPL Size: 32A Reduction ratio: 160 version: 2A speed: max. 7000 rpm rated torque : 137 Nm shaft diameter: Ø 36 mm flange diameter: Ø 110 mm New, with backings ! Dimensions ( packaging ): 325 x 185 x 125 mm

Slotted cup insert for magnetic coupling centrifugal pump PAGUS Ø 162 x 135 mm flange diameter: Ø 162 mm Pot diameter ( inside / outside ): Ø 133 / 137 mm Pot height ( inside / outside ): 127 / 130 mm Material: Ceramic New ! Dimensions: Ø 162 x 135 mm

Diaphragm accumulators, bladder accumulators, pressure accumulators ORSTA 2,5/16 TGL 10843 1413 89 capacity 2.5 l permissible capacity 2.5 lbr /br /permiss. Operating pressure 160 bar permissible Operating temp. 80°C used, tested ! Dimensions: 280 x 150 x 150 mm

Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 168 pieces -Type: Ø 70 - 114 mm 39 different versions see photo parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 380 kg

Welding machine, welding rectifier, FRONIUS TransTig 1600 G/Z 4,075,089 welding current: max 160 A apparent power: max. 7.0 kVA mains voltage: 230 V 1AC 50 / 60 Hz IP23 approx. 2.0 m power cable, approx. 2.5 m control cable used, tested ! Dimensions ( without cable ): 460 x 180 x 280 mm

Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Electric data: 0,25 kW, 0,37 kW, 24 V, 380-415 Drehtellerdurchmesser: 1500 Overall length in mm: 1700 Nominal / outside width in mm: 1600 Conveying length in mm: 1330 Belt width i ...